Author: Jarvis Dale Michie
Publisher:
ISBN:
Category : Transportation
Languages : en
Pages : 432
Book Description
Barrier installations are warranted (or justified) only at highway locations where the consequence of an errant vehicle leaving the roadway is judged to be more hazardous than the impact with the barrier installation. A six degree-of-freedom mathematical model was found to be useful in describing dynamic behavior of a vehicle during impact. Predictions of vehicle and barrier behavior correlated with results obtained from full-scale crash tests. Crash conditions simulated with a computer were used to identify and evaluate vehicle static and dynamic as well as barrier parameters. Vehicle weight, yaw mass moment of inertia, and deformation constant were found to be significant.
Guardrail Performance and Design
Roadside Design Guide
Author:
Publisher: Amer Assn of State Hwy
ISBN: 9781560510314
Category : Bridge railings
Languages : en
Pages : 352
Book Description
This document presents a synthesis of current information and operating practices related to roadside safety and is developed in metric units. The roadside is defined as that area beyond the traveled way (driving lanes) and the shoulder (if any) of the roadway itself. The focus of this guide is on safety treatments that minimize the likelihood of serious injuries when a driver runs off the road. This guide replaces the 1989 AASHTO "Roadside Design Guide."
Publisher: Amer Assn of State Hwy
ISBN: 9781560510314
Category : Bridge railings
Languages : en
Pages : 352
Book Description
This document presents a synthesis of current information and operating practices related to roadside safety and is developed in metric units. The roadside is defined as that area beyond the traveled way (driving lanes) and the shoulder (if any) of the roadway itself. The focus of this guide is on safety treatments that minimize the likelihood of serious injuries when a driver runs off the road. This guide replaces the 1989 AASHTO "Roadside Design Guide."
Recommended Guidelines for Curb and Curb-barrier Installations
Author: Chuck A. Plaxico
Publisher: Transportation Research Board
ISBN: 0309088208
Category : Technology & Engineering
Languages : en
Pages : 106
Book Description
At head of title: National Cooperative Highway Research Program.
Publisher: Transportation Research Board
ISBN: 0309088208
Category : Technology & Engineering
Languages : en
Pages : 106
Book Description
At head of title: National Cooperative Highway Research Program.
Roadside Safety Design
Author: United States. Federal Highway Administration
Publisher:
ISBN:
Category : Highway engineering
Languages : en
Pages : 276
Book Description
This roadside safety design package has been developed to satisfy a need for training in this area. It is hoped that all persons involved in the design, construction, operation, and maintenance of highways will become familiar with the concepts contained in the program. The concepts and practices discussed come from those contained in the AASHTO publication, "Highway Design and Operational Practices Related to Highway Safety". They are discussed in considerable depth in this program and should provide a good working knowledge of roadside safety design. Much of the program is oriented around freeways; however, the principles apply equally toward the lower order highway.
Publisher:
ISBN:
Category : Highway engineering
Languages : en
Pages : 276
Book Description
This roadside safety design package has been developed to satisfy a need for training in this area. It is hoped that all persons involved in the design, construction, operation, and maintenance of highways will become familiar with the concepts contained in the program. The concepts and practices discussed come from those contained in the AASHTO publication, "Highway Design and Operational Practices Related to Highway Safety". They are discussed in considerable depth in this program and should provide a good working knowledge of roadside safety design. Much of the program is oriented around freeways; however, the principles apply equally toward the lower order highway.
Guidelines for Guardrail Implementation
Author: Dean Sicking
Publisher: Transportation Research Board National Research
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 44
Book Description
Explores guidance on selecting the appropriate barrier performance level for the installation of longitudinal barriers. The appendices are not published in this report. They are only available online.
Publisher: Transportation Research Board National Research
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 44
Book Description
Explores guidance on selecting the appropriate barrier performance level for the installation of longitudinal barriers. The appendices are not published in this report. They are only available online.
Education and training information exchange
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 118
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 118
Book Description
Highway Research & Development Studies
Author: United States. Bureau of Public Roads. Office of Research and Development
Publisher:
ISBN:
Category :
Languages : en
Pages : 178
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 178
Book Description
Roadside Design Guide
Author: American Association of State Highway and Transportation Officials. Task Force for Roadside Safety
Publisher: AASHTO
ISBN: 1560515090
Category : Technology & Engineering
Languages : en
Pages : 345
Book Description
"The Roadside Design Guide presents a synthesis of current information and operating practices related to roadside safety and is written in dual units-metric and U.S. Customary. This book is a guide. It is not a standard, nor is it a design policy. It is intended to use as a resource document from which individual highway agencies can develop standards and policies. Although much of the material in the guide can be considered universal in its application, several recommendations are subjective in nature and may need modification to fit local conditions. However, it is important that significant deviations from the guide be based on operational experience and objective analysis. The 2011 edition of the AASHTO Roadside Design Guide has been updated to include hardware that has met the evaluation criteria contained in the National Cooperative Highway Research Program (NCHRP) Report 350: Recommended Procedures for the Safety Performance Evaluation of Highway Features and begins to detail the most current evaluation criteria contained under the Manual for Assessing Safety Hardware, 2009 (MASH). For the most part, roadside hardware tested and accepted under older guidelines that are no longer applicable has not been excluded in this edition." -- AASHTO website.
Publisher: AASHTO
ISBN: 1560515090
Category : Technology & Engineering
Languages : en
Pages : 345
Book Description
"The Roadside Design Guide presents a synthesis of current information and operating practices related to roadside safety and is written in dual units-metric and U.S. Customary. This book is a guide. It is not a standard, nor is it a design policy. It is intended to use as a resource document from which individual highway agencies can develop standards and policies. Although much of the material in the guide can be considered universal in its application, several recommendations are subjective in nature and may need modification to fit local conditions. However, it is important that significant deviations from the guide be based on operational experience and objective analysis. The 2011 edition of the AASHTO Roadside Design Guide has been updated to include hardware that has met the evaluation criteria contained in the National Cooperative Highway Research Program (NCHRP) Report 350: Recommended Procedures for the Safety Performance Evaluation of Highway Features and begins to detail the most current evaluation criteria contained under the Manual for Assessing Safety Hardware, 2009 (MASH). For the most part, roadside hardware tested and accepted under older guidelines that are no longer applicable has not been excluded in this edition." -- AASHTO website.
Highway Noise; a Design Guide for Highway Engineers
Author: Bolt, Beranek, and Newman
Publisher:
ISBN:
Category : Roads
Languages : en
Pages : 840
Book Description
Various methods of assessing noise, loudness, and noise annoyance are reviewed and explained; sources, types, and intensities of traffic noise are noted; typical means of abatement and attenuation are described; design criteria for various land uses ranging from low-density to industrial are suggested and compared with the results of previous BBN and British systems for predicting annoyance and complaint; and a design guide for predicting traffic noise, capable of being programmed for batch and on-line computer applications, is presented in form suitable for use as a working tool. A flow diagram describes the interrelationships of elements in the traffic noise prediction methodology, and each element is discussed in detail in the text. The text is presented of a tape recording that takes the listener through a series of traffic situations, with such variables as traffic distance, flow velocity, distance, outdoors and indoors, and presence or absence of absorbers and attenuators.
Publisher:
ISBN:
Category : Roads
Languages : en
Pages : 840
Book Description
Various methods of assessing noise, loudness, and noise annoyance are reviewed and explained; sources, types, and intensities of traffic noise are noted; typical means of abatement and attenuation are described; design criteria for various land uses ranging from low-density to industrial are suggested and compared with the results of previous BBN and British systems for predicting annoyance and complaint; and a design guide for predicting traffic noise, capable of being programmed for batch and on-line computer applications, is presented in form suitable for use as a working tool. A flow diagram describes the interrelationships of elements in the traffic noise prediction methodology, and each element is discussed in detail in the text. The text is presented of a tape recording that takes the listener through a series of traffic situations, with such variables as traffic distance, flow velocity, distance, outdoors and indoors, and presence or absence of absorbers and attenuators.
Roundabouts
Author: Lee August Rodegerdts
Publisher: Transportation Research Board
ISBN: 0309155118
Category : Technology & Engineering
Languages : en
Pages : 407
Book Description
TRB's National Cooperative Highway Research Program (NCHRP) Report 672: Roundabouts: An Informational Guide - Second Edition explores the planning, design, construction, maintenance, and operation of roundabouts. The report also addresses issues that may be useful in helping to explain the trade-offs associated with roundabouts. This report updates the U.S. Federal Highway Administration's Roundabouts: An Informational Guide, based on experience gained in the United States since that guide was published in 2000.
Publisher: Transportation Research Board
ISBN: 0309155118
Category : Technology & Engineering
Languages : en
Pages : 407
Book Description
TRB's National Cooperative Highway Research Program (NCHRP) Report 672: Roundabouts: An Informational Guide - Second Edition explores the planning, design, construction, maintenance, and operation of roundabouts. The report also addresses issues that may be useful in helping to explain the trade-offs associated with roundabouts. This report updates the U.S. Federal Highway Administration's Roundabouts: An Informational Guide, based on experience gained in the United States since that guide was published in 2000.