Geochemical Modeling of Groundwater, Vadose and Geothermal Systems PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Geochemical Modeling of Groundwater, Vadose and Geothermal Systems PDF full book. Access full book title Geochemical Modeling of Groundwater, Vadose and Geothermal Systems by Jochen Bundschuh. Download full books in PDF and EPUB format.
Author: Jochen Bundschuh
Publisher: CRC Press
ISBN: 0415668107
Category : Technology & Engineering
Languages : en
Pages : 336
Get Book Here
Book Description
Geochemical modeling is an important tool in environmental studies, and in the areas of subsurface and surface hydrology, pedology, water resources management, mining geology, geothermal resources, hydrocarbon geology, and related areas dealing with the exploration and extraction of natural resources. The book fills a gap in the literature through its discussion of geochemical modeling, which simulates the chemical and physical processes affecting the distribution of chemical species in liquid, gas, and solid phases. Geochemical modeling applies to a diversity of subsurface environments, from the vadose zone close to the Earth’s surface, down to deep-seated geothermal reservoirs. This book provides the fundamental thermodynamic concepts of liquid-gas-solid phase systems. It introduces the principal types of geochemical models, such as speciation, reaction-path or forward, inverse- and reactive-transport models, together with examples of the most common codes and the best-practices for constructing geochemical models. The physical laws describing homogeneous and heterogeneous chemical reactions, their kinetics, and the transport of reactive solutes are presented. The partial differential or algebraic equations representing these laws, and the principal numerical methods that allow approximate solutions of these equations that can provide useful solutions to model different geochemical processes, are discussed in detail. Case studies applying geochemical models in different scientific areas and environmental settings, conclude the book. The book is addressed to students, teachers, other professionals, and to the institutions involved in water, geothermal and hydrocarbon resources, mining, and environmental management. The book should prove useful to undergraduate and graduate students, postgraduates, professional geologists and geophysicists, engineers, environmental scientists, soil scientists, hydrochemists, and others interested in water and geochemistry.
Author: Jochen Bundschuh
Publisher: CRC Press
ISBN: 0415668107
Category : Technology & Engineering
Languages : en
Pages : 336
Get Book Here
Book Description
Geochemical modeling is an important tool in environmental studies, and in the areas of subsurface and surface hydrology, pedology, water resources management, mining geology, geothermal resources, hydrocarbon geology, and related areas dealing with the exploration and extraction of natural resources. The book fills a gap in the literature through its discussion of geochemical modeling, which simulates the chemical and physical processes affecting the distribution of chemical species in liquid, gas, and solid phases. Geochemical modeling applies to a diversity of subsurface environments, from the vadose zone close to the Earth’s surface, down to deep-seated geothermal reservoirs. This book provides the fundamental thermodynamic concepts of liquid-gas-solid phase systems. It introduces the principal types of geochemical models, such as speciation, reaction-path or forward, inverse- and reactive-transport models, together with examples of the most common codes and the best-practices for constructing geochemical models. The physical laws describing homogeneous and heterogeneous chemical reactions, their kinetics, and the transport of reactive solutes are presented. The partial differential or algebraic equations representing these laws, and the principal numerical methods that allow approximate solutions of these equations that can provide useful solutions to model different geochemical processes, are discussed in detail. Case studies applying geochemical models in different scientific areas and environmental settings, conclude the book. The book is addressed to students, teachers, other professionals, and to the institutions involved in water, geothermal and hydrocarbon resources, mining, and environmental management. The book should prove useful to undergraduate and graduate students, postgraduates, professional geologists and geophysicists, engineers, environmental scientists, soil scientists, hydrochemists, and others interested in water and geochemistry.
Author: D. Kirk Nordstrom
Publisher: Society for Mining, Metallurgy & Exploration
ISBN: 0873353536
Category : Technology & Engineering
Languages : en
Pages : 172
Get Book Here
Book Description
The single most important factor for the successful application of a geochemical model is the knowledge and experience of the individual(s) conducting the modeling. Geochemical Modeling for Mine Site Characterization and Remediation is the fourth of six volumes in the Management Technologies for Metal Mining Influenced Water series about technologies for management of metal mine and metallurgical process drainage. This handbook describes the important components of hydrogeochemical modeling for mine environments, primarily those mines where sulfide minerals are present—metal mines and coal mines. It provides general guidelines on the strengths and limitations of geochemical modeling and an overview of its application to the hydrogeochemistry of both unmined mineralized sites and those contaminated from mineral extraction and mineral processing. The handbook includes an overview of the models behind the codes, explains vital geochemical computations, describes several modeling processes, provides a compilation of codes, and gives examples of their application, including both successes and failures. Hydrologic modeling is also included because mining contaminants most often migrate by surface water and groundwater transport, and contaminant concentrations are a function of water residence time as well as pathways. This is an indispensable resource for mine planners and engineers, environmental managers, land managers, consultants, researchers, government regulators, nongovernmental organizations, students, stakeholders, and anyone with an interest in mining influenced water. The other handbooks in the series are Basics of Metal Mining Influenced Water; Mitigation of Metal Mining Influenced Water; Mine Pit Lakes: Characteristics, Predictive Modeling, and Sustainability; Techniques for Predicting Metal Mining Influenced Water; and Sampling and Monitoring for the Mine Life Cycle.
Author:
Publisher: Newnes
ISBN: 0080983006
Category : Science
Languages : en
Pages : 14787
Get Book Here
Book Description
This extensively updated new edition of the widely acclaimed Treatise on Geochemistry has increased its coverage beyond the wide range of geochemical subject areas in the first edition, with five new volumes which include: the history of the atmosphere, geochemistry of mineral deposits, archaeology and anthropology, organic geochemistry and analytical geochemistry. In addition, the original Volume 1 on "Meteorites, Comets, and Planets" was expanded into two separate volumes dealing with meteorites and planets, respectively. These additions increased the number of volumes in the Treatise from 9 to 15 with the index/appendices volume remaining as the last volume (Volume 16). Each of the original volumes was scrutinized by the appropriate volume editors, with respect to necessary revisions as well as additions and deletions. As a result, 27% were republished without major changes, 66% were revised and 126 new chapters were added. In a many-faceted field such as Geochemistry, explaining and understanding how one sub-field relates to another is key. Instructors will find the complete overviews with extensive cross-referencing useful additions to their course packs and students will benefit from the contextual organization of the subject matter Six new volumes added and 66% updated from 1st edition. The Editors of this work have taken every measure to include the many suggestions received from readers and ensure comprehensiveness of coverage and added value in this 2nd edition The esteemed Board of Volume Editors and Editors-in-Chief worked cohesively to ensure a uniform and consistent approach to the content, which is an amazing accomplishment for a 15-volume work (16 volumes including index volume)!
Author: Martin A. Diaz Viera
Publisher: CRC Press
ISBN: 0203113888
Category : Mathematics
Languages : en
Pages : 370
Get Book Here
Book Description
Porous media are broadly found in nature and their study is of high relevance in our present lives. In geosciences porous media research is fundamental in applications to aquifers, mineral mines, contaminant transport, soil remediation, waste storage, oil recovery and geothermal energy deposits. Despite their importance, there is as yet no complete
Author: Xinpu Shen
Publisher: CRC Press
ISBN: 1351796291
Category : Science
Languages : en
Pages : 192
Get Book Here
Book Description
The expansion of unconventional petroleum resources in the recent decade and the rapid development of computational technology have provided the opportunity to develop and apply 3D numerical modeling technology to simulate the hydraulic fracturing of shale and tight sand formations. This book presents 3D numerical modeling technologies for hydraulic fracturing developed in recent years, and introduces solutions to various 3D geomechanical problems related to hydraulic fracturing. In the solution processes of the case studies included in the book, fully coupled multi-physics modeling has been adopted, along with innovative computational techniques, such as submodeling. In practice, hydraulic fracturing is an essential project component in shale gas/oil development and tight sand oil, and provides an essential measure in the process of drilling cuttings reinjection (CRI). It is also an essential measure for widened mud weight window (MWW) when drilling through naturally fractured formations; the process of hydraulic plugging is a typical application of hydraulic fracturing. 3D modeling and numerical analysis of hydraulic fracturing is essential for the successful development of tight oil/gas formations: it provides accurate solutions for optimized stage intervals in a multistage fracking job. It also provides optimized well-spacing for the design of zipper-frac wells. Numerical estimation of casing integrity under stimulation injection in the hydraulic fracturing process is one of major concerns in the successful development of unconventional resources. This topic is also investigated numerically in this book. Numerical solutions to several other typical geomechanics problems related to hydraulic fracturing, such as fluid migration caused by fault reactivation and seismic activities, are also presented. This book can be used as a reference textbook to petroleum, geotechnical and geothermal engineers, to senior undergraduate, graduate and postgraduate students, and to geologists, hydrogeologists, geophysicists and applied mathematicians working in this field. This book is also a synthetic compendium of both the fundamentals and some of the most advanced aspects of hydraulic fracturing technology.
Author: Jiuping Xu
Publisher: CRC Press
ISBN: 131574824X
Category : Science
Languages : en
Pages : 422
Get Book Here
Book Description
High temperature, high oil pressure, oil and gas well completion testing have always been a technical challenge and basic theoretical research is one of the key factors needed to ensure a successful completion test. The completion test basic theory includes: a stress analysis of the completion string, completion string buckling behavior, and temperature and pressure distribution prediction. The completion string is the main bearing and power transmission component for oil and gas well operations and production, and it is required to take on a combination of loads, which result in completion string deformation. Because of these complex relationships, completion string stress analysis has become increasingly more complicated. This book discusses the characters of tubular strings in HTHP (High Temperature - High Pressure) oil and gas wells. These characters include the mechanical behavior of tubular strings and the temperature and pressure variation of tubular strings in different conditions. Mathematical models are established for different conditions and solution existence and uniqueness of some models is discussed, providing algorithms corresponding to the different models. Numerical experiments are presented to verify the validity of models and the feasibility of algorithms, and the impact of the parameters of models for oil and gas wells is also discussed. This book is written for production and testing engineers to provide them with the tools to deal more effectively with the numerical decisions they have to take and for researchers and technicians in petroleum and gas testing and production engineering. Finally, it is also intended to serve as a reference book for mathematicians, college teachers and students.
Author: A.T. Riddick
Publisher: Geological Society of London
ISBN: 1862396876
Category : Science
Languages : en
Pages : 274
Get Book Here
Book Description
The discipline of Integrated Environmental Modelling (IEM) has developed in order to solve complex environmental problems, for example understanding the impacts of climate change on the physical environment. IEM provides methods to fuse or link models together, this in turn requires facilities to make models discoverable and also to make the outputs of modelling easily visualized. The vision and challenges for IEM going forward are summarized by leading proponents. Several case studies describe the application of model fusion to a range of real-world problems including integrating groundwater and recharge models within the UK Environment Agency, and the development of ‘catastrophe’ models to predict better the impact of natural hazards. Communicating modelling results to end users who are often not specialist modellers is also an emerging area of research addressed within the volume. Also included are papers that highlight current developments of the technology platforms underpinning model fusion.
Author: Yitian Xiao
Publisher: John Wiley & Sons
ISBN: 1119060028
Category : Science
Languages : en
Pages : 689
Get Book Here
Book Description
Teaches the application of Reactive Transport Modeling (RTM) for subsurface systems in order to expedite the understanding of the behavior of complex geological systems This book lays out the basic principles and approaches of Reactive Transport Modeling (RTM) for surface and subsurface environments, presenting specific workflows and applications. The techniques discussed are being increasingly commonly used in a wide range of research fields, and the information provided covers fundamental theory, practical issues in running reactive transport models, and how to apply techniques in specific areas. The need for RTM in engineered facilities, such as nuclear waste repositories or CO2 storage sites, is ever increasing, because the prediction of the future evolution of these systems has become a legal obligation. With increasing recognition of the power of these approaches, and their widening adoption, comes responsibility to ensure appropriate application of available tools. This book aims to provide the requisite understanding of key aspects of RTM, and in doing so help identify and thus avoid potential pitfalls. Reactive Transport Modeling covers: the application of RTM for CO2 sequestration and geothermal energy development; reservoir quality prediction; modeling diagenesis; modeling geochemical processes in oil & gas production; modeling gas hydrate production; reactive transport in fractured and porous media; reactive transport studies for nuclear waste disposal; reactive flow modeling in hydrothermal systems; and modeling biogeochemical processes. Key features include: A comprehensive reference for scientists and practitioners entering the area of reactive transport modeling (RTM) Presented by internationally known experts in the field Covers fundamental theory, practical issues in running reactive transport models, and hands-on examples for applying techniques in specific areas Teaches readers to appreciate the power of RTM and to stimulate usage and application Reactive Transport Modeling is written for graduate students and researchers in academia, government laboratories, and industry who are interested in applying reactive transport modeling to the topic of their research. The book will also appeal to geochemists, hydrogeologists, geophysicists, earth scientists, environmental engineers, and environmental chemists.
Author: Alexander Klimchouk
Publisher: Springer
ISBN: 3319533487
Category : Science
Languages : en
Pages : 903
Get Book Here
Book Description
This book illustrates the diversity of hypogene speleogenetic processes and void-conduit patterns depending on variations of the geological environments by presenting regional and cave-specific case studies. The cases include both well-known and newly recognized hypogene karst regions and caves of the world. They all focus on geological, hydrogeological, geodynamical and evolutionary contexts of hypogene speleogenesis. The last decade has witnessed the boost in recognition of the possibility, global occurrence, and practical importance of hypogene karstification (speleogenesis), i.e. the development of solutional porosity and permeability by upwelling flow, independent of recharge from the overlying or immediately adjacent surface. Hypogene karst has been identified and documented in many regions where it was previously overlooked or misinterpreted. The book enriches the basis for generalization and categorization of hypogene karst and thus improves our ability to adequately model hypogene karstification and predict related porosity and permeability. It is a book which benefits every researcher, student, and practitioner dealing with karst.
Author: Jochen Bundschuh
Publisher: CRC Press
ISBN: 1317562585
Category : Technology & Engineering
Languages : en
Pages : 402
Get Book Here
Book Description
Availability of and adequate accessibility to freshwater and energy are two key technological and scientific problems of global significance. At the end of the 20th century, the deficit of water for human consumption and economic application forced us to focus on rational use of resources. Increasing the use of renewable energy sources and improving energy efficiency is a challenge for the 21st century. Geothermal energy is heat energy generated and stored in the Earth, accumulated in hydrothermal systems or in dry rocks within the Earth’s crust, in amounts which constitute the energy resources. The sustainable management of geothermal energy resources should be geared towards optimization of energy recovery, but also towards rational management of water resources since geothermal water serves both as energy carrier and also as valuable raw material. Geothermal waters, depending on their hydrogeothermal characteristics, the lithology of the rocks involved, the depth at which the resources occur and the sources of water supply, may be characterized by very diverse physicochemical parameters. This factor largely determines the technology to be used in their exploitation and the way the geothermal water can be used. This book is focused on the effective use of geothermal water and renewable energy for future needs in order to promote modern, sustainable and effective management of water resources. The research field includes crucial new areas of study: • an improvement in the management of freshwater resources through the use of residual geothermal water; • a review of the technologies available in the field of geothermal water treatment for its (re)use for energetic purposes and freshwater production, and • the development of balneotherapy. The book is aimed at professionals, academics and decision makers worldwide, water sector representatives and administrators, business enterprises specializing in renewable energy management and water treatment, working in the areas of geothermal energy usage, water resources, water supply and energy planning. This book has the potential to become a standard text used by educational institutions and research & development establishments involved in the geothermal water management.
