Fault Tree Handbook

Fault Tree Handbook PDF Author: U S Nuclear Regulatory Commission
Publisher: www.Militarybookshop.CompanyUK
ISBN: 9781782662495
Category : Technology & Engineering
Languages : en
Pages : 210

Get Book Here

Book Description
Since 1975, a short course entitled "System Safety and Reliability Analysis" has been presented to over 200 NRC personnel and contractors. The course has been taught jointly by David F. Haasl, Institute of System Sciences, Professor Norman H. Roberts, University of Washington, and 'members of the Probabilistic Analysis Staff, NRC, as part of a risk assessment training program sponsored by the Probabilistic Analysis Staff. This handbook has been developed not only to serve as text for the System Safety and Reliability Course, but also to make available to others a set of otherwise undocumented material on fault tree construction and evaluation. The publication of this handbook is in accordance with the recommendations of the Risk Assessment Review Group Report (NUREG/CR-0400) in which it was stated that the fault/event tree methodology both can and should be used more widely by the NRC. It is hoped that this document will help to codify and systematize the fault tree approach to systems analysis.

Fault Tree Handbook

Fault Tree Handbook PDF Author: U S Nuclear Regulatory Commission
Publisher: www.Militarybookshop.CompanyUK
ISBN: 9781782662495
Category : Technology & Engineering
Languages : en
Pages : 210

Get Book Here

Book Description
Since 1975, a short course entitled "System Safety and Reliability Analysis" has been presented to over 200 NRC personnel and contractors. The course has been taught jointly by David F. Haasl, Institute of System Sciences, Professor Norman H. Roberts, University of Washington, and 'members of the Probabilistic Analysis Staff, NRC, as part of a risk assessment training program sponsored by the Probabilistic Analysis Staff. This handbook has been developed not only to serve as text for the System Safety and Reliability Course, but also to make available to others a set of otherwise undocumented material on fault tree construction and evaluation. The publication of this handbook is in accordance with the recommendations of the Risk Assessment Review Group Report (NUREG/CR-0400) in which it was stated that the fault/event tree methodology both can and should be used more widely by the NRC. It is hoped that this document will help to codify and systematize the fault tree approach to systems analysis.

Design for Safety

Design for Safety PDF Author: Louis J. Gullo
Publisher: John Wiley & Sons
ISBN: 1118974298
Category : Technology & Engineering
Languages : en
Pages : 532

Get Book Here

Book Description
A one-stop reference guide to design for safety principles and applications Design for Safety (DfSa) provides design engineers and engineering managers with a range of tools and techniques for incorporating safety into the design process for complex systems. It explains how to design for maximum safe conditions and minimum risk of accidents. The book covers safety design practices, which will result in improved safety, fewer accidents, and substantial savings in life cycle costs for producers and users. Readers who apply DfSa principles can expect to have a dramatic improvement in the ability to compete in global markets. They will also find a wealth of design practices not covered in typical engineering books—allowing them to think outside the box when developing safety requirements. Design Safety is already a high demand field due to its importance to system design and will be even more vital for engineers in multiple design disciplines as more systems become increasingly complex and liabilities increase. Therefore, risk mitigation methods to design systems with safety features are becoming more important. Designing systems for safety has been a high priority for many safety-critical systems—especially in the aerospace and military industries. However, with the expansion of technological innovations into other market places, industries that had not previously considered safety design requirements are now using the technology in applications. Design for Safety: Covers trending topics and the latest technologies Provides ten paradigms for managing and designing systems for safety and uses them as guiding themes throughout the book Logically defines the parameters and concepts, sets the safety program and requirements, covers basic methodologies, investigates lessons from history, and addresses specialty topics within the topic of Design for Safety (DfSa) Supplements other books in the series on Quality and Reliability Engineering Design for Safety is an ideal book for new and experienced engineers and managers who are involved with design, testing, and maintenance of safety critical applications. It is also helpful for advanced undergraduate and postgraduate students in engineering. Design for Safety is the second in a series of “Design for” books. Design for Reliability was the first in the series with more planned for the future.

Risk Assessment

Risk Assessment PDF Author: Lee T. Ostrom
Publisher: John Wiley & Sons
ISBN: 1119483379
Category : Technology & Engineering
Languages : en
Pages : 587

Get Book Here

Book Description
Guides the reader through a risk assessment and shows them the proper tools to be used at the various steps in the process This brand new edition of one of the most authoritative books on risk assessment adds ten new chapters to its pages to keep readers up to date with the changes in the types of risk that individuals, businesses, and governments are being exposed to today. It leads readers through a risk assessment and shows them the proper tools to be used at various steps in the process. The book also provides readers with a toolbox of techniques that can be used to aid them in analyzing conceptual designs, completed designs, procedures, and operational risk. Risk Assessment: Tools, Techniques, and Their Applications, Second Edition includes expanded case studies and real life examples; coverage on risk assessment software like SAPPHIRE and RAVEN; and end-of-chapter questions for students. Chapters progress from the concept of risk, through the simple risk assessment techniques, and into the more complex techniques. In addition to discussing the techniques, this book presents them in a form that the readers can readily adapt to their particular situation. Each chapter, where applicable, presents the technique discussed in that chapter and demonstrates how it is used. Expands on case studies and real world examples, so that the reader can see complete examples that demonstrate how each of the techniques can be used in analyzing a range of scenarios Includes 10 new chapters, including Bayesian and Monte Carlo Analyses; Hazard and Operability (HAZOP) Analysis; Threat Assessment Techniques; Cyber Risk Assessment; High Risk Technologies; Enterprise Risk Management Techniques Adds end-of-chapter questions for students, and provides a solutions manual for academic adopters Acts as a practical toolkit that can accompany the practitioner as they perform a risk assessment and allows the reader to identify the right assessment for their situation Presents risk assessment techniques in a form that the readers can readily adapt to their particular situation Risk Assessment: Tools, Techniques, and Their Applications, Second Edition is an important book for professionals that make risk-based decisions for their companies in various industries, including the insurance industry, loss control, forensics, all domains of safety, engineering and technical fields, management science, and decision analysis. It is also an excellent standalone textbook for a risk assessment or a risk management course.

Handbook of Performability Engineering

Handbook of Performability Engineering PDF Author: Krishna B. Misra
Publisher: Springer Science & Business Media
ISBN: 1848001312
Category : Technology & Engineering
Languages : en
Pages : 1331

Get Book Here

Book Description
Dependability and cost effectiveness are primarily seen as instruments for conducting international trade in the free market environment. These factors cannot be considered in isolation of each other. This handbook considers all aspects of performability engineering. The book provides a holistic view of the entire life cycle of activities of the product, along with the associated cost of environmental preservation at each stage, while maximizing the performance.

Fault Tree Analysis Primer

Fault Tree Analysis Primer PDF Author: Clifton A.. Ericson
Publisher:
ISBN: 9781466446106
Category : Reliability (Engineering)
Languages : en
Pages : 136

Get Book Here

Book Description
One of the most valuable root-cause analysis tools in the system safety toolbox is fault tree analysis (FTA). A fault tree (FT) is a graphical diagram that uses logic gates to model the various combinations of failures, faults, errors and normal events involved in causing a specified undesired event to occur. The graphical model can be translated into a mathematical model in order to compute failure probabilities and system importance measures. A FT can model all aspects of a system, including hardware, software, human actions and the environment. FTs are employed to evaluate large complex and dynamic systems, in order to understand and prevent potential safety and reliability problems. Using the rigorous and structured methodology of FT construction allows the systems analyst to model the unique combinations of fault events that can cause an UE to occur. This book provides an overview of the FTA process; it describes the symbols, terms, construction methodology and mathematics of FTA.

Reliability Engineering Handbook

Reliability Engineering Handbook PDF Author: Kececioglu Dimitri B
Publisher: DEStech Publications, Inc
ISBN: 9781932078008
Category : Technology & Engineering
Languages : en
Pages : 728

Get Book Here

Book Description
Designed to be used in engineering education and industrial practice, this book provides a comprehensive presentation of reliability engineering for optimized design engineering of products, parts, components and equipment.

Systems Failure Analysis

Systems Failure Analysis PDF Author: Joseph Berk
Publisher: ASM International
ISBN: 1615031375
Category : Technology & Engineering
Languages : en
Pages : 209

Get Book Here

Book Description


NUREG/CR.

NUREG/CR. PDF Author: U.S. Nuclear Regulatory Commission
Publisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 140

Get Book Here

Book Description


Design for Maintainability

Design for Maintainability PDF Author: Louis J. Gullo
Publisher: John Wiley & Sons
ISBN: 1119578515
Category : Technology & Engineering
Languages : en
Pages : 400

Get Book Here

Book Description
How to design for optimum maintenance capabilities and minimize the repair time Design for Maintainability offers engineers a wide range of tools and techniques for incorporating maintainability into the design process for complex systems. With contributions from noted experts on the topic, the book explains how to design for optimum maintenance capabilities while simultaneously minimizing the time to repair equipment. The book contains a wealth of examples and the most up-to-date maintainability design practices that have proven to result in better system readiness, shorter downtimes, and substantial cost savings over the entire system life cycle, thereby, decreasing the Total Cost of Ownership. Design for Maintainability offers a wealth of design practices not covered in typical engineering books, thus allowing readers to think outside the box when developing maintainability design requirements. The books principles and practices can help engineers to dramatically improve their ability to compete in global markets and gain widespread customer satisfaction. This important book: Offers a complete overview of maintainability engineering as a system engineering discipline Includes contributions from authors who are recognized leaders in the field Contains real-life design examples, both good and bad, from various industries Presents realistic illustrations of good maintainability design principles Provides discussion of the interrelationships between maintainability with other related disciplines Explores trending topics in technologies Written for design and logistics engineers and managers, Design for Maintainability is a comprehensive resource containing the most reliable and innovative techniques for improving maintainability when designing a system or product.

Hazard Analysis Techniques for System Safety

Hazard Analysis Techniques for System Safety PDF Author: Clifton A. Ericson, II
Publisher: John Wiley & Sons
ISBN: 0471739413
Category : Technology & Engineering
Languages : en
Pages : 521

Get Book Here

Book Description
A practical guide to identifying hazards using common hazard analysis techniques Many different hazard analysis techniques have been developed over the past forty years. However, there is only a handful of techniques that safety analysts actually apply in their daily work. Written by a former president of the System Safety Society and winner of the Boeing Achievement and Apollo Awards for his safety analysis work, Hazard Analysis Techniques for System Safety explains, in detail, how to perform the most commonly used hazard analysis techniques employed by the system safety engineering discipline. Focusing on the twenty-two most commonly used hazard analysis methodologies in the system safety discipline, author Clifton Ericson outlines the three components that comprise a hazard and describes how to use these components to recognize a hazard during analysis. He then examines each technique in sufficient detail and with numerous illustrations and examples, to enable the reader to easily understand and perform the analysis. Techniques covered include: * Preliminary Hazard List (PHL) Analysis * Preliminary Hazard Analysis (PHA) * Subsystem Hazard Analysis (SSHA) * System Hazard Analysis (SHA) * Operating and Support Hazard Analysis (O&SHA) * Health Hazard Assessment (HHA) * Safety Requirements/Criteria Analysis (SRCA) * Fault Tree Analysis (FTA) * Event Tree Analysis (ETA) * Failure Mode and Effects Analysis (FMEA) * Fault Hazard Analysis * Functional Hazard Analysis * Sneak Circuit Analysis (SCA) * Petri Net Analysis (PNA) * Markov Analysis (MA) * Barrier Analysis (BA) * Bent Pin Analysis (BPA) * HAZOP Analysis * Cause Consequence Analysis (CCA) * Common Cause Failure Analysis (CCFA) * MORT Analysis * Software Safety Assessment (SWSA) Written to be accessible to readers with a minimal amount of technical background, Hazard Analysis Techniques for System Safety gathers, for the first time in one source, the techniques that safety analysts actually apply in daily practice. Both new and seasoned analysts will find this book an invaluable resource for designing and constructing safe systems-- in short, for saving lives.