Factory Planning Manual PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Factory Planning Manual PDF full book. Access full book title Factory Planning Manual by Michael Schenk. Download full books in PDF and EPUB format.
Author: Michael Schenk
Publisher: Springer Science & Business Media
ISBN: 364203635X
Category : Technology & Engineering
Languages : en
Pages : 421
Get Book Here
Book Description
The central purpose of this book is to impart knowledge, skills and practical - plementation methods for the planning and operation of adaptable production - cilities and factories. It addresses planning methods and procedures for various types of production facility up to and including entire factories, and is aimed at practicing factory planners and students alike. The book provides facts and demonstrates practical processes using case studies for the purposes of illustration, so that ultimately skills can be acquired that make independent practical implementation and app- cation possible. It is based on up-to-the-minute practical experience and univ- sally applicable knowledge of the planning and technological design of adaptable production facilities (manufacturing and assembly) and factories. In comparison to existing, thematically-similar reference books, what is in- vative about this manual is that it provides the impulse for a more flexible pl- ning approach for the efficient design of adaptable production facilities using - sponsive, unconventional planning and organizational solutions. The book aims to provide a way of integrating systematic and situation-driven planning methods in a meaningful way. Situation-driven planning is becoming increasingly important to production facilities in these fast-moving times of change, in particular in terms of resource and energy efficiency. Existing technical and organizational course of action in terms of resources (both human and technical) need to be selected for the specific case at hand, and changes (to workshops, products, processes and equ- ment) need to be managed.
Author: Michael Schenk
Publisher: Springer Science & Business Media
ISBN: 364203635X
Category : Technology & Engineering
Languages : en
Pages : 421
Get Book Here
Book Description
The central purpose of this book is to impart knowledge, skills and practical - plementation methods for the planning and operation of adaptable production - cilities and factories. It addresses planning methods and procedures for various types of production facility up to and including entire factories, and is aimed at practicing factory planners and students alike. The book provides facts and demonstrates practical processes using case studies for the purposes of illustration, so that ultimately skills can be acquired that make independent practical implementation and app- cation possible. It is based on up-to-the-minute practical experience and univ- sally applicable knowledge of the planning and technological design of adaptable production facilities (manufacturing and assembly) and factories. In comparison to existing, thematically-similar reference books, what is in- vative about this manual is that it provides the impulse for a more flexible pl- ning approach for the efficient design of adaptable production facilities using - sponsive, unconventional planning and organizational solutions. The book aims to provide a way of integrating systematic and situation-driven planning methods in a meaningful way. Situation-driven planning is becoming increasingly important to production facilities in these fast-moving times of change, in particular in terms of resource and energy efficiency. Existing technical and organizational course of action in terms of resources (both human and technical) need to be selected for the specific case at hand, and changes (to workshops, products, processes and equ- ment) need to be managed.
Author: Hans-Peter Wiendahl
Publisher: Springer
ISBN: 3662463911
Category : Technology & Engineering
Languages : en
Pages : 513
Get Book Here
Book Description
This handbook introduces a methodical approach and pragmatic concept for the planning and design of changeable factories that act in strategic alliances to supply the ever-changing needs of the global market. In the first part, the change drivers of manufacturing enterprises and the resulting new challenges are considered in detail with focus on an appropriate change potential. The second part concerns the design of the production facilities and systems on the factory levels work place, section, building and site under functional, organisational, architectural and strategic aspects keeping in mind the environmental, health and safety aspects including corporate social responsibility. The third part is dedicated to the planning and design method that is based on a synergetic interaction of process and space. The accompanying project management of the planning and construction phase and the facility management for the effective utilization of the built premises close the book. The Authors Prof. em. Dr.-Ing. Dr. mult. h.c. Hans-Peter Wiendahl has been director for 23 years of the Institute of Factory planning and Logistics at the Leibniz University of Hannover in Germany. Prof. Dipl.-Ing. Architekt BDA Jürgen Reichardt is Professor at the Muenster school of architecture and partner of RMA Reichardt – Maas – Associate Architects in Essen Germany. Prof. Dr.-Ing. habil. Peter Nyhuis is Managing Director of the Institute of Factory Planning and Logistics at the Leibniz University of Hannover in Germany.
Author: Edward John Phillips
Publisher:
ISBN:
Category : Architecture
Languages : en
Pages : 280
Get Book Here
Book Description
A step-by-step guide to planning new factories and plant rearrangements, this book describes proven analytical methods for: Calculating space requirements, Activity-pair relationships, Materials handling analysis, Generating alternative layout. This proven strategy masterfully weaves together the very best elements of layout methods for manufacturing cells, JIT, demand-flow and constraint-based flow manufacturing philosophies, in addition to traditional job shop and assembly line operations. Learn how to methodically reduce or totally rid a design of profit eroders during the plan/design of a cost efficient manufacturing layout.
Author: George B. Tims
Publisher:
ISBN:
Category : Factory management
Languages : en
Pages : 280
Get Book Here
Book Description
Author: E. Shashi Menon
Publisher: Gulf Professional Publishing
ISBN: 0123838541
Category : Technology & Engineering
Languages : en
Pages : 577
Get Book Here
Book Description
Pipeline Planning and Construction Field Manual aims to guide engineers and technicians in the processes of planning, designing, and construction of a pipeline system, as well as to provide the necessary tools for cost estimations, specifications, and field maintenance. The text includes understandable pipeline schematics, tables, and DIY checklists. This source is a collaborative work of a team of experts with over 180 years of combined experience throughout the United States and other countries in pipeline planning and construction. Comprised of 21 chapters, the book walks readers through the steps of pipeline construction and management. The comprehensive guide that this source provides enables engineers and technicians to manage routine auditing of technical work output relative to technical input and established expectations and standards, and to assess and estimate the work, including design integrity and product requirements, from its research to completion. Design, piping, civil, mechanical, petroleum, chemical, project production and project reservoir engineers, including novices and students, will find this book invaluable for their engineering practices. - Back-of-the envelope calculations - Checklists for maintenance operations - Checklists for environmental compliance - Simulations, modeling tools and equipment design - Guide for pump and pumping station placement
Author: Hans-Jörg Bullinger
Publisher: Springer Science & Business Media
ISBN: 3540885463
Category : Technology & Engineering
Languages : en
Pages : 560
Get Book Here
Book Description
Use this technology guide to find descriptions of today’s most essential global technologies. Clearly structured and simply explained, the book’s reference format invites even the casual reader to explore the stimulating innovative ideas it contains.
Author: Ángel Ortiz Bas
Publisher: Springer Science & Business Media
ISBN: 3642143407
Category : Computers
Languages : en
Pages : 317
Get Book Here
Book Description
Manufacturing and operations management paradigms are evolving toward more open and resilient spaces where innovation is driven not only by ever-changing customer needs but also by agile and fast-reacting networked structures. Flexibility, adaptability and responsiveness are properties that the next generation of systems must have in order to successfully support such new emerging trends. Customers are being attracted to be involved in Co-innovation Networks, as - proved responsiveness and agility is expected from industry ecosystems. Renewed production systems needs to be modeled, engineered and deployed in order to achieve cost-effective solutions. BASYS conferences have been developed and organized as a forum in which to share visions and research findings for innovative sustainable and knowledge-based products-services and manufacturing models. Thus, the focus of BASYS is to discuss how human actors, emergent technologies and even organizations are integrated in order to redefine the way in which the val- creation process must be conceived and realized. BASYS 2010, which was held in Valencia, Spain, proposed new approaches in automation where synergies between people, systems and organizations need to be fully exploited in order to create high added-value products and services. This book contains the selection of the papers which were accepted for presentation at the BASYS 2010 conference, covering consolidated and emerging topics of the conference scope.
Author: Michael F. Zaeh
Publisher: Springer Science & Business Media
ISBN: 3319020544
Category : Technology & Engineering
Languages : en
Pages : 472
Get Book Here
Book Description
The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.
Author: Michel Baudin
Publisher: Taylor & Francis
ISBN: 1351110306
Category : Business & Economics
Languages : en
Pages : 800
Get Book Here
Book Description
This Introduction to Manufacturing focuses students on the issues that matter to practicing industrial engineers and managers. It offers a systems perspective on designing, managing, and improving manufacturing operations. On each topic, it covers the key issues, with pointers on where to dig deeper. Unlike the many textbooks on operations management, supply chain management, and process technology, this book weaves together these threads as they interact in manufacturing. It has five parts: Getting to Know Manufacturing: Fundamental concepts of manufacturing as an economic activity, from manufacturing strategy to forecasting market demand Engineering the Factory: Physical design of factories and processes, the necessary infrastructure and technology for manufacturing Making Information Flow: The "central nervous system" that triggers and responds to events occurring in production Making Materials Flow: The logistics of manufacturing, from materials handling inside the factory via warehousing to supply chain management Enhancing Performance: Managing manufacturing performance and methods to maintain and improve it, both in times of normal operations and emergencies Supported with rich illustrations and teaching aids, Introduction to Manufacturing is essential reading for industrial engineering and management students – of all ages and backgrounds – engaged in the vital task of making the things we all use.
Author: Jan C. Aurich
Publisher: Springer Nature
ISBN: 3031357795
Category : Technology & Engineering
Languages : en
Pages : 305
Get Book Here
Book Description
This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, the University of California Berkeley, and University of California Davis. The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available. This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.
