Author: Robert S. Daum
Publisher:
ISBN:
Category : Cladding
Languages : en
Pages : 22
Book Description
Sufficient mechanical ductility of high-burnup Zircaloy-4 fuel cladding is important to prevent large-opening ruptures and significant fuel dispersal during postulated in-reactor and spent-fuel processing accidents. The effect of irradiation, oxidation, and hydriding at high fuel burnup may degrade cladding ductility to the extent that such large ruptures are possible under severe loadings. To understand this susceptibility to failure, this study focused on mechanical testing coupled with detailed finite-element modeling and analyses. Under ring-compression-type loading at room temperature, tensile cracks form within the corrosion-induced oxide layer under elastic loading. The oxide crack then propagates into the cladding wall under additional loading with little to no measurable plastic strain, as confirmed by both experiment and analyses of plastic hoop strain in the ring. For cladding with the oxide removed prior to testing at ≤1 %/s, cracking of the underlying hydride rim comprised of circumferentially oriented hydrides occurs at low plastic hoop strain (≤3 %), whereas the finite-element analysis suggests that the base alloy with a relatively small amount of hydrides appears to fail at higher strain (>8 %). At even higher strain rates (≈400 %/s), cracking within the hydride rim occurs at near-zero ductility, but the base alloy continues to remain highly ductile. These room-temperature results indicate that the hydride rim is sensitive to strain rate, whereas the base alloy is relatively not. With the precipitation of ≈100 % radially oriented hydrides, the cladding exhibits near-zero ductility at room temperature and ≈0.1 %/s. This study suggests that the ring-compression test coupled with finite-element modeling and analysis may be used to estimate crack-initiation strains in irradiated cladding materials with susceptible microstructures and under various deformation rates.
Experimental and Analytical Investigation of the Mechanical Behavior of High-Burnup Zircaloy-4 Fuel Cladding
Author: Robert S. Daum
Publisher:
ISBN:
Category : Cladding
Languages : en
Pages : 22
Book Description
Sufficient mechanical ductility of high-burnup Zircaloy-4 fuel cladding is important to prevent large-opening ruptures and significant fuel dispersal during postulated in-reactor and spent-fuel processing accidents. The effect of irradiation, oxidation, and hydriding at high fuel burnup may degrade cladding ductility to the extent that such large ruptures are possible under severe loadings. To understand this susceptibility to failure, this study focused on mechanical testing coupled with detailed finite-element modeling and analyses. Under ring-compression-type loading at room temperature, tensile cracks form within the corrosion-induced oxide layer under elastic loading. The oxide crack then propagates into the cladding wall under additional loading with little to no measurable plastic strain, as confirmed by both experiment and analyses of plastic hoop strain in the ring. For cladding with the oxide removed prior to testing at ≤1 %/s, cracking of the underlying hydride rim comprised of circumferentially oriented hydrides occurs at low plastic hoop strain (≤3 %), whereas the finite-element analysis suggests that the base alloy with a relatively small amount of hydrides appears to fail at higher strain (>8 %). At even higher strain rates (≈400 %/s), cracking within the hydride rim occurs at near-zero ductility, but the base alloy continues to remain highly ductile. These room-temperature results indicate that the hydride rim is sensitive to strain rate, whereas the base alloy is relatively not. With the precipitation of ≈100 % radially oriented hydrides, the cladding exhibits near-zero ductility at room temperature and ≈0.1 %/s. This study suggests that the ring-compression test coupled with finite-element modeling and analysis may be used to estimate crack-initiation strains in irradiated cladding materials with susceptible microstructures and under various deformation rates.
Publisher:
ISBN:
Category : Cladding
Languages : en
Pages : 22
Book Description
Sufficient mechanical ductility of high-burnup Zircaloy-4 fuel cladding is important to prevent large-opening ruptures and significant fuel dispersal during postulated in-reactor and spent-fuel processing accidents. The effect of irradiation, oxidation, and hydriding at high fuel burnup may degrade cladding ductility to the extent that such large ruptures are possible under severe loadings. To understand this susceptibility to failure, this study focused on mechanical testing coupled with detailed finite-element modeling and analyses. Under ring-compression-type loading at room temperature, tensile cracks form within the corrosion-induced oxide layer under elastic loading. The oxide crack then propagates into the cladding wall under additional loading with little to no measurable plastic strain, as confirmed by both experiment and analyses of plastic hoop strain in the ring. For cladding with the oxide removed prior to testing at ≤1 %/s, cracking of the underlying hydride rim comprised of circumferentially oriented hydrides occurs at low plastic hoop strain (≤3 %), whereas the finite-element analysis suggests that the base alloy with a relatively small amount of hydrides appears to fail at higher strain (>8 %). At even higher strain rates (≈400 %/s), cracking within the hydride rim occurs at near-zero ductility, but the base alloy continues to remain highly ductile. These room-temperature results indicate that the hydride rim is sensitive to strain rate, whereas the base alloy is relatively not. With the precipitation of ≈100 % radially oriented hydrides, the cladding exhibits near-zero ductility at room temperature and ≈0.1 %/s. This study suggests that the ring-compression test coupled with finite-element modeling and analysis may be used to estimate crack-initiation strains in irradiated cladding materials with susceptible microstructures and under various deformation rates.
Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors
Author: John H. Jackson
Publisher: Springer
ISBN: 3030046397
Category : Technology & Engineering
Languages : en
Pages : 2532
Book Description
This two-volume set represents a collection of papers presented at the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. The purpose of this conference series is to foster an exchange of ideas about problems and their remedies in water-cooled nuclear power plants of today and the future. Contributions cover problems facing nickel-based alloys, stainless steels, pressure vessel and piping steels, zirconium alloys, and other alloys in water environments of relevance. Components covered include pressure boundary components, reactor vessels and internals, steam generators, fuel cladding, irradiated components, fuel storage containers, and balance of plant components and systems.
Publisher: Springer
ISBN: 3030046397
Category : Technology & Engineering
Languages : en
Pages : 2532
Book Description
This two-volume set represents a collection of papers presented at the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. The purpose of this conference series is to foster an exchange of ideas about problems and their remedies in water-cooled nuclear power plants of today and the future. Contributions cover problems facing nickel-based alloys, stainless steels, pressure vessel and piping steels, zirconium alloys, and other alloys in water environments of relevance. Components covered include pressure boundary components, reactor vessels and internals, steam generators, fuel cladding, irradiated components, fuel storage containers, and balance of plant components and systems.
Mechanical Properties of Zircaloy-4 PWR Fuel Cladding with Burnup 54-64MWd/kgU and Implications for RIA Behavior
Author: J. Desquines
Publisher:
ISBN:
Category : Embrittlement
Languages : en
Pages : 22
Book Description
The PROMETRA material testing program is a support program related to the study of high burnup fuel rod behavior under Reactivity Initiated Accidents (RIA) and to the interpretation of the CABRI REP-Na RIA test results. Hoop and axial tensile tests have been performed on fresh and irradiated Zircaloy-4 cladding alloy first at CEA Grenoble hot labs and now at CEA Saclay in order to assess the cladding mechanical behavior during RIA transients. Efforts have been continuously carried out in order to improve the prototipicallity of the tests for RIA studies involving new specimens and new testing techniques. The corrosion level of irradiated specimens reached up to 130 ?m of oxide layer thickness. The influence of in-pile oxide layer spallation has also been addressed. High strain-rate material properties of irradiated Zircaloy-4 and the consequences of hydride embrittlement can be derived from the PROMETRA program.
Publisher:
ISBN:
Category : Embrittlement
Languages : en
Pages : 22
Book Description
The PROMETRA material testing program is a support program related to the study of high burnup fuel rod behavior under Reactivity Initiated Accidents (RIA) and to the interpretation of the CABRI REP-Na RIA test results. Hoop and axial tensile tests have been performed on fresh and irradiated Zircaloy-4 cladding alloy first at CEA Grenoble hot labs and now at CEA Saclay in order to assess the cladding mechanical behavior during RIA transients. Efforts have been continuously carried out in order to improve the prototipicallity of the tests for RIA studies involving new specimens and new testing techniques. The corrosion level of irradiated specimens reached up to 130 ?m of oxide layer thickness. The influence of in-pile oxide layer spallation has also been addressed. High strain-rate material properties of irradiated Zircaloy-4 and the consequences of hydride embrittlement can be derived from the PROMETRA program.
Comprehensive Nuclear Materials
Author:
Publisher: Elsevier
ISBN: 0081028660
Category : Science
Languages : en
Pages : 4871
Book Description
Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field
Publisher: Elsevier
ISBN: 0081028660
Category : Science
Languages : en
Pages : 4871
Book Description
Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field
An Experimental Facility for Oxidation and Biaxial Deformation Studies of Zircaloy-4 Fuel Cladding Samples
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 14
Book Description
Description of the major components and performance characteristics of theFuel Cladding Test Facility developed by Ontario Hydro Research Division.This facility willgenerate materials data on the oxidation and deformation behaviour of CANDUreactor Zircaloy-4 fuel cladding for temperatures in the range 673-1173K.Such data are needed in the analysis of some post-shutdown accident scenariosand fuel handling incidents.The test facility consists of: tube furnaces forspecimen heating under closed-loop control; apressurizing circuit for deformation under biaxial conditions; amicroprocessor-based data logger for data acquisition; and an elapsed timeindicator for time to failure monitoring.
Publisher:
ISBN:
Category :
Languages : en
Pages : 14
Book Description
Description of the major components and performance characteristics of theFuel Cladding Test Facility developed by Ontario Hydro Research Division.This facility willgenerate materials data on the oxidation and deformation behaviour of CANDUreactor Zircaloy-4 fuel cladding for temperatures in the range 673-1173K.Such data are needed in the analysis of some post-shutdown accident scenariosand fuel handling incidents.The test facility consists of: tube furnaces forspecimen heating under closed-loop control; apressurizing circuit for deformation under biaxial conditions; amicroprocessor-based data logger for data acquisition; and an elapsed timeindicator for time to failure monitoring.
Nuclear Science Abstracts
Author:
Publisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 658
Book Description
Publisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 658
Book Description
Preliminary Investigation of Zircaloy-4 as a Research Reactor Cladding Material
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
As part of a scoping study for the ATR fuel conversion project, an initial comparison of the material properties of Zircaloy-4 and Aluminum-6061 (T6 and O-temper) is performed to provide a preliminary evaluation of Zircaloy-4 for possible inclusion as a candidate cladding material for ATR fuel elements. The current fuel design for the ATR uses Aluminum 6061 (T6 and O temper) as a cladding and structural material in the fuel element and to date, no fuel failures have been reported. Based on this successful and longstanding operating history, Zircaloy-4 properties will be evaluated against the material properties for aluminum-6061. The preliminary investigation will focus on a comparison of density, oxidation rates, water chemistry requirements, mechanical properties, thermal properties, and neutronic properties.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
As part of a scoping study for the ATR fuel conversion project, an initial comparison of the material properties of Zircaloy-4 and Aluminum-6061 (T6 and O-temper) is performed to provide a preliminary evaluation of Zircaloy-4 for possible inclusion as a candidate cladding material for ATR fuel elements. The current fuel design for the ATR uses Aluminum 6061 (T6 and O temper) as a cladding and structural material in the fuel element and to date, no fuel failures have been reported. Based on this successful and longstanding operating history, Zircaloy-4 properties will be evaluated against the material properties for aluminum-6061. The preliminary investigation will focus on a comparison of density, oxidation rates, water chemistry requirements, mechanical properties, thermal properties, and neutronic properties.
Nuclear Safety
Author:
Publisher:
ISBN:
Category : Nuclear engineering
Languages : en
Pages : 152
Book Description
Publisher:
ISBN:
Category : Nuclear engineering
Languages : en
Pages : 152
Book Description
Scientific and Technical Aerospace Reports
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1330
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1330
Book Description
הבודהא
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description