Emission Modeling in Turbulent Premixed Flames PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Emission Modeling in Turbulent Premixed Flames PDF full book. Access full book title Emission Modeling in Turbulent Premixed Flames by Hongtao Yang. Download full books in PDF and EPUB format.
Author: Hongtao Yang
Publisher:
ISBN:
Category : Electronic dissertations
Languages : en
Pages :
Get Book Here
Book Description
Turbulent lean premixed combustion now plays a predominant role in reducing emission of pollutants such as NOx. For turbulent premixed flames located in the thin-reaction-zones regime, small-scale eddies could penetrate into the preheat zone of the flames and enhance the mixing process. In this study, the effects of small-scale turbulence on emission (NOx and CO) formation in premixed flame fronts are investigated through the incorporation of turbulence induced diffusion in the preheat zone of one-dimensional premixed flames. One-dimensional methane/air premixed flames are simulated with the 53-species GRI-Mech 3.0 mechanism at both atmospheric and engine conditions with different turbulence intensities. It is found that the NO generated in flame fronts deceases with increasing intensity of small-scale turbulence and the effect is more profound at high pressures. At high pressures, the turbulence induced diffusion in the preheat zone can reduce the NOx formation in flame fronts by more than 40%. On the other hand, the CO mass fraction in flame fronts increases with increasing intensity of small-scale turbulence. In the cases considered, the CO mass fraction in the flame fronts can increase by more than 55%. In addition, a flamelet-based approach that accounts for the flame thickening effects has been formulated to simulate NOx and CO formation in turbulent lean premixed combustion. In this approach, the species NO and CO are transported and solved in a simulation with chemical source terms being pre-calculated from 1-D premixed flames with detailed chemical kinetics and turbulence induced diffusion. The NO source term can be quantified by its formation in flame fronts and its formation rate in post-flame region. The CO source term can be calculated through its mass fraction at flame fronts, its mass fraction in the post-flame region and an oxidation time scale. The effect of heat loss on NO formation has been studied by investigate the relation between post-flame NO formation rate and flame temperature. Meanwhile, the effect of turbulent-chemistry interaction on NO were studied. The flamelet-based emission model has been implemented into Fluent and 3-Dimensional simulations were conducted in a combustion rig.
Author: Hongtao Yang
Publisher:
ISBN:
Category : Electronic dissertations
Languages : en
Pages :
Get Book Here
Book Description
Turbulent lean premixed combustion now plays a predominant role in reducing emission of pollutants such as NOx. For turbulent premixed flames located in the thin-reaction-zones regime, small-scale eddies could penetrate into the preheat zone of the flames and enhance the mixing process. In this study, the effects of small-scale turbulence on emission (NOx and CO) formation in premixed flame fronts are investigated through the incorporation of turbulence induced diffusion in the preheat zone of one-dimensional premixed flames. One-dimensional methane/air premixed flames are simulated with the 53-species GRI-Mech 3.0 mechanism at both atmospheric and engine conditions with different turbulence intensities. It is found that the NO generated in flame fronts deceases with increasing intensity of small-scale turbulence and the effect is more profound at high pressures. At high pressures, the turbulence induced diffusion in the preheat zone can reduce the NOx formation in flame fronts by more than 40%. On the other hand, the CO mass fraction in flame fronts increases with increasing intensity of small-scale turbulence. In the cases considered, the CO mass fraction in the flame fronts can increase by more than 55%. In addition, a flamelet-based approach that accounts for the flame thickening effects has been formulated to simulate NOx and CO formation in turbulent lean premixed combustion. In this approach, the species NO and CO are transported and solved in a simulation with chemical source terms being pre-calculated from 1-D premixed flames with detailed chemical kinetics and turbulence induced diffusion. The NO source term can be quantified by its formation in flame fronts and its formation rate in post-flame region. The CO source term can be calculated through its mass fraction at flame fronts, its mass fraction in the post-flame region and an oxidation time scale. The effect of heat loss on NO formation has been studied by investigate the relation between post-flame NO formation rate and flame temperature. Meanwhile, the effect of turbulent-chemistry interaction on NO were studied. The flamelet-based emission model has been implemented into Fluent and 3-Dimensional simulations were conducted in a combustion rig.
Author: Tarek Echekki
Publisher: Springer Science & Business Media
ISBN: 9400704127
Category : Technology & Engineering
Languages : en
Pages : 496
Get Book Here
Book Description
Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book is intended for a relatively broad audience, including seasoned researchers and graduate students in engineering, applied mathematics and computational science, engine designers and computational fluid dynamics (CFD) practitioners, scientists at funding agencies, and anyone wishing to understand the state-of-the-art and the future directions of this scientifically challenging and practically important field.
Author: Nedunchezhian Swaminathan
Publisher: Cambridge University Press
ISBN: 1139498584
Category : Technology & Engineering
Languages : en
Pages : 447
Get Book Here
Book Description
A work on turbulent premixed combustion is important because of increased concern about the environmental impact of combustion and the search for new combustion concepts and technologies. An improved understanding of lean fuel turbulent premixed flames must play a central role in the fundamental science of these new concepts. Lean premixed flames have the potential to offer ultra-low emission levels, but they are notoriously susceptible to combustion oscillations. Thus, sophisticated control measures are inevitably required. The editors' intent is to set out the modeling aspects in the field of turbulent premixed combustion. Good progress has been made on this topic, and this cohesive volume contains contributions from international experts on various subtopics of the lean premixed flame problem.
Author: Noah Eugen Klarmann
Publisher:
ISBN: 9783843941280
Category :
Languages : en
Pages :
Get Book Here
Book Description
Author: Norbert Peters
Publisher: Cambridge University Press
ISBN: 1139428063
Category : Science
Languages : en
Pages : 322
Get Book Here
Book Description
The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 104
Get Book Here
Book Description
Author: Gaurav Kewlani
Publisher:
ISBN:
Category :
Languages : en
Pages : 300
Get Book Here
Book Description
High efficiency, low emissions and stable operation over a wide range of conditions are some of the key requirements of modem-day combustors. To achieve these objectives, lean premixed flames are generally preferred as they achieve efficient and clean combustion. A drawback of lean premixed combustion, however, is that the flames are more prone to dynamics. The unsteady release of sensible heat and flow dilatation in combustion processes create pressure fluctuations which, particularly in premixed flames, can couple with the acoustics of the combustion system. This acoustic coupling creates a feedback loop with the heat release that can lead to severe thermoacoustic instabilities that can damage the combustor. Understanding these dynamics, predicting their onset and proposing passive and active control strategies are critical to large-scale implementation. For the numerical study of such systems, large eddy simulation (LES) techniques with appropriate combustion models and reaction mechanisms are highly appropriate. These approaches balance the computational complexity and predictive accuracy. This work, therefore, aims to explore the applicability of these methods to the study of premixed wake stabilized flames. Specifically, finite rate chemistry LES models that can effectively capture the interaction between different turbulent scales and the combustion fronts have been implemented, and applied for the analysis of premixed turbulent flame dynamics in laboratory-scale combustor configurations. Firstly, the artificial flame thickening approach, along with an appropriate reduced chemistry mechanism, is utilized for modeling turbulence-combustion interactions at small scales. A novel dynamic formulation is proposed that explicitly incorporates the influence of strain on flame wrinkling by solving a transport equation for the latter rather than using local-equilibrium-based algebraic models. Additionally, a multiple-step combustion chemistry mechanism is used for the simulations. Secondly, the presumed-PDF approach, coupled with the flamelet generated manifold (FGM) technique, is also implemented for modeling turbulence-combustion interactions. The proposed formulation explicitly incorporates the influence of strain via the scalar dissipation rate and can result in more accurate predictions especially for highly unsteady flame configurations. Specifically, the dissipation rate is incorporated as an additional coordinate to presume the PDF and strained flamelets are utilized to generate the chemistry databases. These LES solvers have been developed and applied for the analysis of reacting flows in several combustor configurations, i.e. triangular bluff body in a rectangular channel, backward facing step configuration, axi-symmetric bluff body in cylindrical chamber, and cylindrical sudden expansion with swirl, and their performance has been be validated against experimental observations. Subsequently, the impact of the equivalence ratio variation on flame-flow dynamics is studied for the swirl configuration using the experimental PIV data as well as the numerical LES code, following which dynamic mode decomposition of the flow field is performed. It is observed that increasing the equivalence ratio can appreciably influence the dominant flow features in the wake region, including the size and shape of the recirculation zone(s), as well as the flame dynamics. Specifically, varying the heat loading results in altering the dominant flame stabilization mechanism, thereby causing transitions across distinct- flame configurations, while also modifying the inner recirculation zone topology significantly. Additionally, the LES framework has also been applied to gain an insight into the combustion dynamics phenomena for the backward-facing step configuration. Apart from evaluating the influence of equivalence ratio on the combustion process for stable flames, the flame-flow interactions in acoustically forced scenarios are also analyzed using LES and dynamic mode decomposition (DMD). Specifically, numerical simulations are performed corresponding to a selfexcited combustion instability configuration as observed in the experiments, and it is observed that LES is able to suitably capture the flame dynamics. These insights highlight the effect of heat release variation on flame-flow interactions in wall-confined combustor configurations, which can significantly impact combustion stability in acoustically-coupled systems. The fidelity of the solvers in predicting the system response to variation in heat loading and to acoustic forcing suggests that the LES framework can be suitably applied for the analysis of flame dynamics as well as to understand the fundamental mechanisms responsible for combustion instability. KEY WORDS - large eddy simulation, LES, wake stabilized flame, turbulent premixed combustion, combustion modeling, artificially thickened flame model, triangular bluff body, backward facing step combustor, presumed-PDF model, flamelet generated manifold, axi-symmetric bluff body, cylindrical swirl combustor, particle image velocimetry, dynamic mode decomposition, combustion instability, forced response.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 35
Get Book Here
Book Description
Large-scale strain rate field, a resolved quantity which is easily computable in large-eddy simulations (LES), could have profound effects on the premixed flame properties by altering the turbulent flame speed and inducing local extinction. The role of the resolved strain rate has been investigated in a posterior LES study of GE lean premixed dry low NOx emissions LM6000 gas turbine combustor model. A novel approach which is based on the coupling of the lineareddy model with a one-dimensional counter-flow solver has been applied to obtain the parameterizations of the resolved premixed flame properties in terms of the reactive progress variable, the local strain rate measure, and local Reynolds and Karlovitz numbers. The strain rate effects have been analyzed by comparing LES statistics for several models of the turbulent flame speed, i.e, with and without accounting for the local strain rate effects, with available experimental data. The sensitivity of the simulation results to the inflow velocity conditions as well as the grid resolution have been also studied. Overall, the results suggest the necessity to represent the strain rate effects accurately in order to improve LES modeling of the turbulent flame speed.
Author:
Publisher:
ISBN:
Category : Combustion engineering
Languages : en
Pages : 421
Get Book Here
Book Description
A work on turbulent premixed combustion is timely because of increased concern about the environmental impact of combustion and the search for new combustion concepts and technologies. An improved understanding of lean fuel turbulent premixed flames must play a central role in the fundamental science of these new concepts. Lean premixed flames have the potential to offer ultra-low emission levels, but they are notoriously susceptible to combustion oscillations. Thus, sophisticated control measures are inevitably required. The editors' intent is to set out the modeling aspects in the field of turbulent premixed combustion. Good progress has been made recently on this topic. Thus, it is timely to edit a cohesive volume containing contributions from international experts on various subtopics of the lean premixed flame problem"
Author: Nasim Shahbazian
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
