Effect of tool pin profile on microstructure and mechanical properties of AL6063 in Friction stir processing PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Effect of tool pin profile on microstructure and mechanical properties of AL6063 in Friction stir processing PDF full book. Access full book title Effect of tool pin profile on microstructure and mechanical properties of AL6063 in Friction stir processing by Chandan Deep Singh. Download full books in PDF and EPUB format.
Author: Chandan Deep Singh
Publisher: Anchor Academic Publishing
ISBN: 3960677057
Category : Technology & Engineering
Languages : en
Pages : 69
Get Book Here
Book Description
Friction stir processing (FSP) is a solid state process in which a non consumable stirring (rotating) tool is plunged into a work piece up to half thickness, which causes intense plastic deformation, material mixing, and thermal exposure, resulting in refinement of micro structural properties, enhancement of mechanical properties, and homogeneity of the processed (nugget) zone. The FSP technique has been successfully used for producing fine-grained structure and surface composite, modifying the microstructure of materials, synthesizing composites like metal-metal composites. The use of FSP generates significant frictional heating and intense plastic deformation, thereby resulting in the occurrence of dynamic recrystallization in the stirred zone (SZ). Although there is still a controversy about the grain-refinement mechanism in the SZ, it is generally believed that the grain refinement is due to dynamic recrystallization. Therefore, the factors influencing the nucleation and growth of the dynamic recrystallization will determine the resultant grain microstructure in the SZ. It has been demonstrated that the FSP parameters, tool geometry, material chemistry, workpiece temperature, vertical pressure, and active cooling exert a significant effect on the size of the recrystallized grains in the SZ.
Author: Chandan Deep Singh
Publisher: Anchor Academic Publishing
ISBN: 3960677057
Category : Technology & Engineering
Languages : en
Pages : 69
Get Book Here
Book Description
Friction stir processing (FSP) is a solid state process in which a non consumable stirring (rotating) tool is plunged into a work piece up to half thickness, which causes intense plastic deformation, material mixing, and thermal exposure, resulting in refinement of micro structural properties, enhancement of mechanical properties, and homogeneity of the processed (nugget) zone. The FSP technique has been successfully used for producing fine-grained structure and surface composite, modifying the microstructure of materials, synthesizing composites like metal-metal composites. The use of FSP generates significant frictional heating and intense plastic deformation, thereby resulting in the occurrence of dynamic recrystallization in the stirred zone (SZ). Although there is still a controversy about the grain-refinement mechanism in the SZ, it is generally believed that the grain refinement is due to dynamic recrystallization. Therefore, the factors influencing the nucleation and growth of the dynamic recrystallization will determine the resultant grain microstructure in the SZ. It has been demonstrated that the FSP parameters, tool geometry, material chemistry, workpiece temperature, vertical pressure, and active cooling exert a significant effect on the size of the recrystallized grains in the SZ.
Author: Chandan Deep Singh
Publisher: Anchor Academic Publishing
ISBN: 3960672055
Category : Technology & Engineering
Languages : en
Pages : 73
Get Book Here
Book Description
Friction stir processing (FSP) is a solid state process in which a non consumable stirring (rotating) tool is plunged into a work piece up to half thickness, which causes intense plastic deformation, material mixing, and thermal exposure, resulting in refinement of micro structural properties, enhancement of mechanical properties, and homogeneity of the processed (nugget) zone. The FSP technique has been successfully used for producing fine-grained structure and surface composite, modifying the microstructure of materials, synthesizing composites like metal-metal composites. The use of FSP generates significant frictional heating and intense plastic deformation, thereby resulting in the occurrence of dynamic recrystallization in the stirred zone (SZ). Although there is still a controversy about the grain-refinement mechanism in the SZ, it is generally believed that the grain refinement is due to dynamic recrystallization. Therefore, the factors influencing the nucleation and growth of the dynamic recrystallization will determine the resultant grain microstructure in the SZ. It has been demonstrated that the FSP parameters, tool geometry, material chemistry, workpiece temperature, vertical pressure, and active cooling exert a significant effect on the size of the recrystallized grains in the SZ.
Author: Ripandeep Singh
Publisher: Anchor Academic Publishing
ISBN: 396067211X
Category : Technology & Engineering
Languages : en
Pages : 77
Get Book Here
Book Description
The need for low weight and high performance structural materials has revolutionized the technology and has led to the emergence of new processes and methodologies. Friction stir processing (FSP), based on the principle of friction stir welding, is an emerging solid state metal working process. This technique causes intense plastic deformation and high strain rates in the processed material, resulting in precise control of the microstructure through material mixing and densification. FSP process has been successfully used for achieving significant grain refinement and enhancement of surface properties. The present work focuses on the study of behavior of Aluminium cast alloy (Al-6063) processed by the friction stir processing technique. Samples of FSP-ed aluminium were examined and their microstructures, microhardness, Rockwell hardnesss and impact strength were studied and compared with base metal Al-6063. Hardness tester was employed to evaluate the interfacial bonding between the particles and matrix by indenting the hardness with the constant load and constant time. Impact test was employed to know the Impact Strength of samples against the Impact of Hammer.
Author: Jasveer Singh
Publisher: BookRix
ISBN: 3743849658
Category : Technology & Engineering
Languages : en
Pages : 37
Get Book Here
Book Description
Aluminium is the third most abundant element (after oxygen and silicon), and the most abundant metal in the Earth's crust. Aluminium is remarkable for the metal's low density and for its ability to resist corrosion due to the phenomenon of passivation. Structural components made from aluminium and its alloys are vital to the aerospace industry and are important in other areas of transportation and structural materials Welding plays a crucial role or say as a back bone of manufacturing industry to join the components. Friction stir welding (FSW) is a relatively new joining process that has been demonstrated in a variety of metals such as steel, titanium, lead, copper and aluminium. The unique properties of friction stir welds make possible some completely new structural designs with significant impact to ship design and construction. Friction stir welding is especially advantageous for joining aluminium and has been exploited commercially around the world in several industries. In the present work the effects of welding speed have been investigated on the microstructural and mechanical properties of friction stir welded aluminium alloy 6063. FSW was carried out at rotational speed of 1300 rpm (constant) and transverse speeds of 35, 50 and 65 mm/min. Mechanical performance has been investigated in terms of hardness, wear resistance and tensile strength. To study the effect of post welding heat treatment on properties of friction stir welded joint, the artificial ageing was carried out at 1600 C for a soaking period of 20 hours in the muffle furnace. The study revealed that friction stir welded joint prepared at welding speed of 35 mm/min exhibited better tensile strength, hardness and wear resistance. Better mechanical properties of the joint prepared at welding speed of 35 mm/min may be attributed due to fine, homogeneous and equaxed grain structure of stir zone. Post welding heat treatment of friction stir welded joint improved the wear resistance and microhardness of the joint. However tensile properties deteriorated with the post welding heat treatment of joint.
Author: J. Paulo Davim
Publisher: Springer Nature
ISBN: 303063986X
Category : Technology & Engineering
Languages : en
Pages : 422
Get Book Here
Book Description
This book presents some developments in the field of welding technology. It starts with classical welding concepts, covering then new approaches. Topics such as ultrasonic welding, robots welding, welding defects and welding quality control are presented in a clear, didactic way. Lower temperature metal-joining techniques such as brazing and soldering are highlighted as well.
Author: Hari Kumar Voruganti
Publisher: Springer Nature
ISBN: 9811512019
Category : Science
Languages : en
Pages : 1161
Get Book Here
Book Description
This book presents select peer reviewed proceedings of the International Conference on Applied Mechanical Engineering Research (ICAMER 2019). The books examines various areas of mechanical engineering namely design, thermal, materials, manufacturing and industrial engineering covering topics like FEA, optimization, vibrations, condition monitoring, tribology, CFD, IC engines, turbo-machines, automobiles, manufacturing processes, machining, CAM, additive manufacturing, modelling and simulation of manufacturing processing, optimization of manufacturing processing, supply chain management, and operations management. In addition, recent studies on composite materials, materials characterization, fracture and fatigue, advanced materials, energy storage, green building, phase change materials and structural change monitoring are also covered. Given the contents, this book will be useful for students, researchers and professionals working in mechanical engineering and allied fields.
Author: Kaushik Kumar
Publisher: Woodhead Publishing
ISBN: 0128221615
Category : Technology & Engineering
Languages : en
Pages : 262
Get Book Here
Book Description
Sustainable Manufacturing and Design draws together research and practices from a wide range of disciplines to help engineers design more environmentally sustainable products. Sustainable manufacturing requires that the entire manufacturing enterprise adopts sustainability goals at a system-level in decision-making, hence the scope of this book covers a wide range of viewpoints in response. Advice on recyclability, zero landfill design, sustainable quality systems, and product take-back issues make this a highly usable guide to the challenges facing engineering designers today. Contributions from around the globe are included, helping to form an international view of an issue that requires a global response. Addresses methods to reduce energy and material waste through manufacturing design Helps to troubleshoot manufacturability problems that can arise in sustainable design Includes coverage of the legislative, cultural and social impacts of sustainable manufacturing, promoting a holistic view of the subject
Author: Piratpal Singh
Publisher: BookRix
ISBN: 3743868253
Category : Technology & Engineering
Languages : en
Pages : 41
Get Book Here
Book Description
In recent years, the friction stir welding process becomes advantageous due to its application to join aluminium alloys and dissimilar metals. The friction stir welding (FSW) process is initially explored by Wayne Thomas. In this welding process two dissimilar metal sheets are joined by passing rotating tool through adjoining edges of sheets. During passing of tool, the friction heat generation is responsible for welding. The key parameters in friction stir welding are speed of rotation of tool, tool shoulder diameter speed of welding, tool pin diameter, length of tool pin. Tool used in FSW have many geometries like hexagonal, square, rectangular and triangular shapes.
Author: Kaushik Kumar
Publisher: John Wiley & Sons
ISBN: 1786307979
Category : Technology & Engineering
Languages : en
Pages : 258
Get Book Here
Book Description
In the automotive and aerospace industries, the need for strong yet light materials has given rise to extensive research into aluminum and magnesium alloys and formable titanium alloys. All of these are categorized as light weight materials. The distinguishing feature of light weight materials is that they are low density, but they have a wide range of properties and, as a result, a wide range of applications. This book provides researchers and students with an overview of the recent advancements in light weight material processing, manufacturing and characterization. It contains chapters by eminent researchers on topics associated with light weight materials, including on the current buzzword “composite materials”. First, this book describes the current status of light weight materials. Then, it studies applications of these materials, given that, as the densities vary, so do the applications, ranging from automobiles and aviation to bio-mechatronics. This book will therefore serve as an excellent guide to this field.
Author: Nelson Gomes Affonseca (Netto)
Publisher:
ISBN:
Category : Aluminum alloys -- Hardenability
Languages : en
Pages :
Get Book Here
Book Description
Friction Stir Processing (FSP) is a promising thermomechanical technique that is used to modify the microstructure of metals locally, and thereby locally improve mechanical properties of the material. FSP uses a simple and inexpensive tool, and has been shown to eliminate pores and also reduce the sizes of intermetallics in aluminum alloys. This is of great interest for research on solidification, production and performance of aluminum alloy castings because FSP can enhance the structural quality of aluminum casting significantly by minimizing the effect of those structural defects. In the literature, there is evidence that the effectiveness of FSP can change with tool wear of the tool used. Therefore, a study was first conducted to determine the effect of FSP time on the tool life and wear in 6061-T6 extrusions. Results showed the presence of two distinct phases in the tool life and wear. Metallographic analyses confirmed that wear in Phase I was due to fracture of the threads of the tool and Phase II was due to regular wear, mostly without fracture. Moreover, built-up layers of aluminum were observed between threads. The microhardness profile was found to be different from those reported in the literature for 6061-T6, with Vickers hardness increasing continuously from the the stir zone to the base material. To investigate the degree of effectiveness of FSP in improving the structural quality of cast A356 alloys, ingots with different quality (high and low) were friction strir processed with single and multiple passes. Analysis of tensile test results and work hardening characteristics showed that for the high quality ingot, a single pass was sufficient to eliminate the structural defects. Subsequent FSP passes had no effect on the work hardening characteristics. In contrast, tensile results and work hardening characteristics improved with every pass for the low quality ingot, indicating that the effectiveness of FSP was dependent on the initial quality of the metal. The evolution of microstructure, specifically the size and spacing of Silicon (Si) eutectic particles, was investigated after friction stir processing of high quality A356 castings with single and multiple passes. Si particles were found to coarsen with each pass, which was in contrast with previous findings in the literature. The nearest neighbor distance of Si particles also increased with each FSP pass, indicating that microstructure became progressively more homogeneous after each pass. In the literature, the improvement observed after FSP of Al-Si cast alloys was attributed to the refinement of Si particles. Tensile data from high quality A356 ingot showed that there was no correlation between the size of Si particles and ductility. To the author's knowledge, this is the first time that the absence of a correlation between Si particle size and ductility has been found.
