Author: Kamal Henri Khayat
Publisher: Springer Science & Business Media
ISBN: 9048196647
Category : Technology & Engineering
Languages : en
Pages : 444
Get Book Here
Book Description
Dear Colleagues, We are pleased to organize the Sixth International RILEM Symposium on SCC and the Fourth North-American Conference on the Design and Use of SCC, held on Sept 26-29, 2010 in Montreal, Quebec, Canada. The RILEM series of symposia started in 1999 in Stockholm, followed by Tokyo in 2001, Reykjavik in 2003, Chicago in 2005, and Ghent in 2007 with a steadily increasing number of papers, participants, and interest from across the globe. Due to the growing success of SCC, regional conferences have been organized, such as the North-American Conference on the Design and Use of SCC held in Chicago in 2002, 2005, and 2008; the International Symposium on Design, Performance and Use of SCC held nd in Changsa, China in 2005 and in Beijing, China in 2009; as well as the 2 International Conference on Advances in Concrete Technology in the Middle East: SCC held in Abu Dhabi in 2009. It can be concluded that these regional Conferences and Symposia were highly successful and reached a far more international audience than anticipated. Nearly 100 papers were submitted for these proceedings from which the International Scientific Committee selected 37 contributions covering a wide range of timely and original subjects from around the world. We would like to acknowledge the input of the International Scientific Committee for providing critical input to guarantee high quality of these peer-reviewed proceedings. We invite you to explore a wealth of information in the electronic proceedings.
Author: FIB – International Federation for Structural Concrete
Publisher: FIB - Féd. Int. du Béton
ISBN: 8087158296
Category : Technology & Engineering
Languages : en
Pages : 707
Get Book Here
Book Description
Author: Kamal H. Khayat
Publisher: Springer Science & Business Media
ISBN: 3319032453
Category : Technology & Engineering
Languages : en
Pages : 283
Get Book Here
Book Description
The State-of-the-Art Report of RILEM Technical Committee 228-MPS on Mechanical properties of Self-Compacting Concrete (SCC) summarizes an extensive body of information related to mechanical properties and mechanical behaviour of SCC. Due attention is given to the fact that the composition of SCC varies significantly. A wide range of mechanical properties are considered, including compressive strength, stress-strain relationship, tensile and flexural strengths, modulus of elasticity, shear strength, effect of elevated temperature, such as fire spalling and residual properties after fire, in-situ properties, creep, shrinkage, bond properties and structural behaviour. A chapter on fibre-reinforced SCC is included, as well as a chapter on specialty SCC, such as light-weight SCC, heavy-weight SCC, preplaced aggregate SCC, special fibre reinforced SCC and underwater concrete.
Author: Rafat Siddique
Publisher: Woodhead Publishing
ISBN: 012817370X
Category : Technology & Engineering
Languages : en
Pages : 410
Get Book Here
Book Description
Self-Compacting Concrete: Materials, Properties and Applications presents the latest research on various aspects of self-compacting concrete, including test methods, rheology, strength and durability properties, SCC properties at elevated temperature, SC manufacturing with the use of SCMs, recycled aggregates and industrial by-products. Written by an international group of contributors who are closely associated with the development of self-compacting concrete, the book explores the main differences between SCC and normal concrete in terms of raw materials, fresh properties and hardened properties. Other topics discussed include the structure and practical applications of fiber reinforced SCC. Researchers and experienced engineers will find this reference to be a systematic source to SCC with its accounting of the latest breakthroughs in the field and discussions of SCC constructability, structural integrity, improved flows into complex forms, and superior strength and durability. - Offers a systematic and comprehensive source of information on the latest developments in SCC technology - Includes mix design procedures, tests standards, rheology, strength and durability properties - Explores the properties and practical applications of SCC
Author: Mohammed Sonebi
Publisher: Springer Nature
ISBN: 303136743X
Category : Technology & Engineering
Languages : en
Pages : 221
Get Book Here
Book Description
This book presents the work of the RILEM TC 266-MRP, whose purpose was to enhance the reliability of rheological measurements performed on cement-based materials. It makes users more aware of potential sources of errors in the measurements, and provide guidelines on how to observe, counteract or eliminate the errors. Improving the reliability of rheological measurements will further enhance the use of rheology to investigate different aspects of the fresh properties of cement-based materials. After an introduction into mix design and applications, the book delivers a comprehensive overview of rheology definitions, behavior, and parameters; rheometers; measuring and analysis procedures; difficulties and challenges during measurements; relationships with specific empirical tests; and the behavior of concrete near a surface. This report on the measurement of rheological properties of complex materials such as concrete enables readers to understand the applicable concepts of rheology, and address the challenges on the measuring procedures, the rheological models and some errors and limitations of rheometers used.
Author: FIB - Féd. Int. du Béton
Publisher: FIB - Féd. Int. du Béton
ISBN: 288394119X
Category : Technology & Engineering
Languages : en
Pages : 497
Get Book Here
Book Description
The FRC-2014 Workshop Fibre Reinforced Concrete: from Design to Structural Applications was the first ACI-fib joint technical event. The Workshop, held at Polytechnique Montreal (Canada) on July 24th and 25th 2014, was attended by 116 participants from 25 countries and 4 continents. The first international FRC workshop was held in Bergamo (Italy) in 2004. At that time, the lack of specific building codes and standards was identified as the main inhibitor to the application of this technology in engineering practice. Ten years after Bergamo, many of the objectives identified at that time have been achieved. The use of fibre reinforced concrete (FRC) for designing structural members in bending and shear has recently been addressed in the fib Model Code 2010. Steel fibre reinforced concrete (SFRC) has also been used structurally in several building and bridge projects in Europe and North-America. SFRC has been widely used in segmental tunnel linings all over the world. Members of ACI544 and fib TG-4.1 have been involved in writing code based specifications for the design of FRC structural members. More than fifty papers were presented at the Workshop from which forty-four were selected for this joint ACI/fib publication. The papers are organised in the document under six themes: Design guidelines and specifications, Material properties for design, Behaviour and design of beams and columns, Behaviour and design of slabs and other structures, Behaviour and design of foundations and underground components, and finally, Applications in structure and underground construction projects.
Author: Mahdi Karkush
Publisher: Springer Nature
ISBN: 9819793688
Category :
Languages : en
Pages : 645
Get Book Here
Book Description
Author: Pedro Serna
Publisher: Springer Nature
ISBN: 3030584828
Category : Technology & Engineering
Languages : en
Pages : 1180
Get Book Here
Book Description
This volume highlights the latest advances, innovations, and applications in the field of fibre reinforced concrete (FRC) and discusses a diverse range of topics concerning FRC: rheology and early-age properties, mechanical properties, codes and standards, long-term properties, durability, analytical and numerical models, quality control, structural and Industrial applications, smart FRC’s, nanotechnologies related to FRC, textile reinforced concrete, structural design and UHPFRC. The contributions present improved traditional and new ideas that will open novel research directions and foster multidisciplinary collaboration between different specialists. Although the symposium was postponed, the book gathers peer-reviewed papers selected in 2020 for the RILEM-fib International Symposium on Fibre Reinforced Concrete (BEFIB).
Author: Karen Scrivener
Publisher: Springer
ISBN: 9401799393
Category : Technology & Engineering
Languages : en
Pages : 552
Get Book Here
Book Description
This volume focuses on research and practical issues linked to Calcined Clays for Sustainable Concrete. The main subjects are geology of clays, hydration and performance of blended system with calcined clays, alkali activated binders, economic and environmental impacts of the use of calcined clays in cement based materials. Topics addressed in this book include the influence of processing on reactivity of calcined clays, influence of clay mineralogy on reactivity, geology of clay deposits, Portland-calcined clay systems, hydration, durability, performance, Portland-calcined clay-limestone systems, hydration, durability, performance, calcined clay-alkali systems, life cycle analysis, economics and environmental impact of use of calcined clays in cement and concrete and field applications. This book compiles the different contributions of the 1st International Conference on Calcined Clays for Sustainable Concrete, which took place in Lausanne, Switzerland, June, 23-25, 2015.The papers present the latest research in their field. It contains nearly 80 papers and abstracts. Overall, this work gives a broad view of research on calcined clays in the field of construction and will stimulate further research into calcined clays for sustainable concrete.
Author: Ali Nazari
Publisher: Butterworth-Heinemann
ISBN: 012804540X
Category : Technology & Engineering
Languages : en
Pages : 443
Get Book Here
Book Description
Handbook of Low Carbon Concrete brings together the latest breakthroughs in the design, production, and application of low carbon concrete. In this handbook, the editors and contributors have paid extra attention to the emissions generated by coarse aggregates, emissions due to fine aggregates, and emissions due to cement, fly ash, GGBFS, and admixtures. In addition, the book provides expert coverage on emissions due to concrete batching, transport and placement, and emissions generated by typical commercially produced concretes. - Includes the tools and methods for reducing the emissions of greenhouse gases - Explores technologies, such as carbon capture, storage, and substitute cements - Provides essential data that helps determine the unique factors involved in designing large, new green cement plants
