Design of precast concrete structures against accidental actions PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Design of precast concrete structures against accidental actions PDF full book. Access full book title Design of precast concrete structures against accidental actions by fib Fédération internationale du béton. Download full books in PDF and EPUB format.
Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
ISBN: 2883941033
Category : Technology & Engineering
Languages : en
Pages : 84
Get Book
Book Description
Since the 1980’s, several buildings throughout the world have been subject to gas explosions, impact by cars or airplanes, or car bomb attacks. In many cases the effect of the impact or explosion has been the failure of a critical structural member at the perimeter of the building. After the failure, the load supported by that member could not be redistributed and part or all of the structure has collapsed in a progressive manner. The phenomenon that occurs when local failure is not confined to the area of initial distress, and spreads horizontally and/or vertically through the structure, is termed progressive collapse. Progressive collapse is a relatively rare event, as it requires both an accidental action to cause local damage and a structure that lacks adequate continuity, ductility, and redundancy to prevent the spread of damage. It is technically very difficult and economically prohibitive to design buildings for absolute safety. However it is possible to construct precast concrete buildings that afford an acceptable degree of safety with regard to accidental actions. A structure is normally designed to respond properly, without damage, under normal load conditions, but local and/or global damages cannot be avoided under the effect of an unexpected, but moderate degree of accidental overload. Properly designed and constructed structures usually possess reasonable probability not to collapse catastrophically under such loads, depending on different factors, for example: the type of loading; the degree and the location of accidental loading in regard to the structure and its structural members; the type of structural system, the construction technology, and the spans between structural vertical members, etc. No structure can be expected to be totally resistant to actions arising from an unexpected and extreme cause, but it should not be damaged to an extent that is disproportionate to the original cause. The aim of fib Bulletin 63 is to summarize the present knowledge on the subject and to provide guidance for the design of precast structures against progressive collapse. This is addressed in terms of (a) the classification of the actions, (b) their effect on the structural types, (c) the strategies to cope with such actions, (d) the design methods and (e) some typical detailing, all supplemented with illustrations from around the world, and some model calculations.
Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
ISBN: 2883941033
Category : Technology & Engineering
Languages : en
Pages : 84
Get Book
Book Description
Since the 1980’s, several buildings throughout the world have been subject to gas explosions, impact by cars or airplanes, or car bomb attacks. In many cases the effect of the impact or explosion has been the failure of a critical structural member at the perimeter of the building. After the failure, the load supported by that member could not be redistributed and part or all of the structure has collapsed in a progressive manner. The phenomenon that occurs when local failure is not confined to the area of initial distress, and spreads horizontally and/or vertically through the structure, is termed progressive collapse. Progressive collapse is a relatively rare event, as it requires both an accidental action to cause local damage and a structure that lacks adequate continuity, ductility, and redundancy to prevent the spread of damage. It is technically very difficult and economically prohibitive to design buildings for absolute safety. However it is possible to construct precast concrete buildings that afford an acceptable degree of safety with regard to accidental actions. A structure is normally designed to respond properly, without damage, under normal load conditions, but local and/or global damages cannot be avoided under the effect of an unexpected, but moderate degree of accidental overload. Properly designed and constructed structures usually possess reasonable probability not to collapse catastrophically under such loads, depending on different factors, for example: the type of loading; the degree and the location of accidental loading in regard to the structure and its structural members; the type of structural system, the construction technology, and the spans between structural vertical members, etc. No structure can be expected to be totally resistant to actions arising from an unexpected and extreme cause, but it should not be damaged to an extent that is disproportionate to the original cause. The aim of fib Bulletin 63 is to summarize the present knowledge on the subject and to provide guidance for the design of precast structures against progressive collapse. This is addressed in terms of (a) the classification of the actions, (b) their effect on the structural types, (c) the strategies to cope with such actions, (d) the design methods and (e) some typical detailing, all supplemented with illustrations from around the world, and some model calculations.
Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
ISBN: 2883940835
Category : Technology & Engineering
Languages : en
Pages : 369
Get Book
Book Description
Connections are among the most essential parts in precast structures. Their performance relates to the structural limit states, as well as to manufacture of the precast elements and erection and maintenance of the structure itself. Proper design of connections is one major key to a successful prefabrication. The principal aim of fib Bulletin 43 is to encourage good practice in the design of structural connections in precast concrete structures. This is achieved through a good understanding of structural connections as parts of the overall structural system and of basic force transferring mechanisms. The bulletin consists of two parts; the first part concerns general considerations and philosophy in the design of structural connections, and the second part deals with basic force transferring mechanisms within structural connections. The main focus is on the design of structural connections with regard to their structural function in ordinary design situations in the serviceability and ultimate limit states, and in accidental/abnormal design situations, like fire, lack of fit and impact/accidental loads. Other aspects considered include production, handling and site erection of elements, building physics, durability and maintenance. Bulletin 43 applies to structural connections for precast concrete buildings, although the information on basic force transfer mechanisms can also be applicable to other types of prefabricated structures.
Author: FIB – International Federation for Structural Concrete
Publisher: FIB - International Federation for Structural Concrete
ISBN: 0727702580
Category : Technology & Engineering
Languages : en
Pages : 34
Get Book
Book Description
Author: Kim S. Elliott
Publisher: CRC Press
ISBN: 100072588X
Category : Technology & Engineering
Languages : en
Pages : 733
Get Book
Book Description
This second edition of Precast Concrete Structures introduces the conceptual design ideas for the prefabrication of concrete structures and presents a number of worked examples that translate designs from BS 8110 to Eurocode EC2, before going into the detail of the design, manufacture, and construction of precast concrete multi-storey buildings. Detailed structural analysis of precast concrete and its use is provided and some details are presented of recent precast skeletal frames of up to forty storeys. The theory is supported by numerous worked examples to Eurocodes and European Product Standards for precast reinforced and prestressed concrete elements, composite construction, joints and connections and frame stability, together with extensive specifications for precast concrete structures. The book is extensively illustrated with over 500 photographs and line drawings.
Author: FIB - Féd. Int. du Béton
Publisher: FIB - Féd. Int. du Béton
ISBN: 2883941149
Category : Technology & Engineering
Languages : en
Pages : 325
Get Book
Book Description
In 1994 fib Commission 6: Prefabrication edited a successful Planning and Design Handbook that ran to approximately 45,000 copies and was published in Spanish and German. Nearly 20 years later Bulletin 74 brings that first publication up to date. It offers a synthesis of the latest structural design knowledge about precast building structures against the background of 21st century technological innovations in materials, production and construction. With it, we hope to help architects and engineers achieve a full understanding of precast concrete building structures, the possibilities they offer and their specific design philosophy. It was principally written for non-seismic structures. The handbook contains eleven chapters, each dealing with a specific aspect of precast building structures. The first chapter of the handbook highlights best practice opportunities that will enable architects, design engineers and contractors to work together towards finding efficient solutions, which is something unique to precast concrete buildings. The second chapter offers basic design recommendations that take into account the possibilities, restrictions and advantages of precast concrete, along with its detailing, manufacture, transport, erection and serviceability stages. Chapter three describes the precast solutions for the most common types of buildings such as offices, sports stadiums, residential buildings, hotels, industrial warehouses and car parks. Different application possibilities are explored to teach us which types of precast units are commonly used in all those situations. Chapter four covers the basic design principles and systems related to stability. Precast concrete structures should be designed according to a specific stability concept, unlike cast in-situ structures. Chapter five discusses structural connections. Chapters six to nine address the four most commonly used systems or subsystems of precast concrete in buildings, namely, portal and skeletal structures, wall-frame structures, floor and roof structures and architectural concrete facades. In chapter ten the design and detailing of a number of specific construction details in precast elements are discussed, for example, supports, corbels, openings and cutouts in the units, special features related to the detailing of the reinforcement, and so forth. Chapter eleven gives guidelines for the fire design of precast concrete structures. The handbook concludes with a list of references to good literature on precast concrete construction.
Author: Portland Cement Association
Publisher:
ISBN:
Category : Concrete
Languages : en
Pages : 156
Get Book
Book Description
Author: FIB – International Federation for Structural Concrete
Publisher: FIB - International Federation for Structural Concrete
ISBN: 288394153X
Category : Technology & Engineering
Languages : en
Pages : 246
Get Book
Book Description
There has been continued global growth in tall building construction over recent years. The variation in the use of such buildings is remarkable, from lavish hotels and apartments to socially affordable units. As the world struggles to cope with growing numbers of people, dwindling resources and movements from rural to urban habitats it is unavoidable that population densities will increase, and more efficient use of scarce land will be needed. Taller buildings are the inevitable consequence. Tall buildings can use several different types of material to form their framework and envelope. Those materials are mixed to provide an optimum building solution to suit client requirements such as structure, occupancy, vision, affordability, timing, sustainability and quality. Precast concrete is one of those materials, and has been used from whole frameworks to facades, and elements mixed with structural steelwork and cast in place concrete. This state of the art report shows how precast concrete can be effectively integrated into tall buildings using modern materials and techniques, drawing on the experience and expertise that is currently available in the global precast concrete industry. The report is aimed at not only building professionals and students, but also at contractors, investors, owners, public bodies and any other parties interested in the possibilities for use of precast concrete in tall building construction. Extensive case studies at the end of the Bulletin illustrate the benefits and applications discussed in the earlier chapters.
Author: FIB – International Federation for Structural Concrete
Publisher: FIB - International Federation for Structural Concrete
ISBN: 2883941491
Category : Technology & Engineering
Languages : en
Pages : 290
Get Book
Book Description
Concrete bridges are an important part of today's road infrastructure. An important part of those concrete bridges is to a large extent prefabricated. Precast concrete enables all the advantages of an industrialized process to be fully utilized. Contemporary concrete mixtures are used to realize high-strength bridge girders and piers that exactly meet the requirements set, both structurally and aesthetically, with a small ecological footprint. Sustainable and durable! On the construction site, there is no need for complex formwork, the execution time is drastically reduced and where road, water and rail traffic on or under the bridge has to be temporarily interrupted, it is only minimally inconvenienced during the execution of the project. Bridges capture the imagination. In addition to their pure functionality, overcoming a height difference, they offer designers unprecedented opportunities to shape their creativity, including when using precast concrete. This bulletin, prepared by the experts of Task Group 6.5 'Precast concrete bridges', takes a closer look at the conceptual (preliminary) design of prefabricated concrete bridges. The bulletin does not have the ambition to define the umbrella term 'conceptual design' but shows in a pragmatic way, using 24 examples spread all over the world, how leading designers use this methodology to select from the many possibilities to arrive at an ideal solution taking into account all design conditions. One often reads that experience is a necessary condition for good conceptual design. The pooled knowledge and experience in this bulletin already provide the reader with a good head start. Commission 6 thanks the former convener of the Task Group Hugo Corres, editor of this document, and the current co-conveners Marcello Waimberg and Ken-ichi Kata as well as all active members of the Task Group for sharing their knowledge and experience and for the successful realization of this bulletin.
Author: Kim S. Elliott
Publisher: CRC Press
ISBN: 1003836542
Category : Technology & Engineering
Languages : en
Pages : 639
Get Book
Book Description
This guide to precast prestressed concrete (PSC) introduces and applies principles for the design of PSC slabs, thermal slabs, beam and block flooring and main beams, including (where appropriate) cantilevers, and composite and continuous construction. The book provides numerous worked examples for a wide range of PSC elements and covers the innovative use of PSC on several projects in the UK over the past ten years, drawing on the authors' first-hand experience in the design and manufacture of special products. The contents are in line with latest revisions of the Eurocodes and European Product Standards. Precast Prestressed Concrete for Building Structures is ideal for consulting structural engineers, clients, PSC manufacturers, and advanced undergraduate and graduate students, both as a guide and a textbook.
Author: Kim S. Elliott
Publisher: John Wiley & Sons
ISBN: 1118876490
Category : Technology & Engineering
Languages : en
Pages : 503
Get Book
Book Description
Modernisation, Mechanisation and Industrialisation of Concrete Structures discusses the manufacture of high quality prefabricated concrete construction components, and how that can be achieved through the application of developments in concrete technology, information modelling and best practice in design and manufacturing techniques.
