Author: U.s. Department of Transportation
Publisher: Createspace Independent Pub
ISBN: 9781508680574
Category : Technology & Engineering
Languages : en
Pages : 182
Book Description
Debris accumulation at culvert and bridge structures openings is a widespread problem. The accumulation of debris at inlets of highway culverts and bridge structures is a frequent cause of unsatisfactory performance and malfunction. This accumulation may result in erosion at culvert entrances, overtopping and failure of roadway embankments and damage to adjacent properties, increased local scour at piers and/or abutments, and the formation of pressure flow scour. Consideration of debris accumulations and the need for debris-control structures should be an essential part of the design of all drainage structures. Structural and non-structural measures have been used effectively to prevent or reduce the size of debris accumulations at bridges and culverts. Structural measures can include features that: (a) intercept debris at or upstream of a structure inlet; (b) deflect debris near the inlet; or (c) orient the debris to facilitate passage of the debris through the structure. Non-structural measures include management of the upstream watershed and maintenance. This publication provides measures for both culvert and bridge structures. The measures available for culverts are based on the information included in earlier editions of this manual. Selection of a certain debris countermeasure depends upon the size, quantity, and type of debris, the potential hazard to life and property, the costs involved, and the maintenance proposed.
Debris Control Structures - Evaluation and Countermeasures
Author: U.s. Department of Transportation
Publisher: Createspace Independent Pub
ISBN: 9781508680574
Category : Technology & Engineering
Languages : en
Pages : 182
Book Description
Debris accumulation at culvert and bridge structures openings is a widespread problem. The accumulation of debris at inlets of highway culverts and bridge structures is a frequent cause of unsatisfactory performance and malfunction. This accumulation may result in erosion at culvert entrances, overtopping and failure of roadway embankments and damage to adjacent properties, increased local scour at piers and/or abutments, and the formation of pressure flow scour. Consideration of debris accumulations and the need for debris-control structures should be an essential part of the design of all drainage structures. Structural and non-structural measures have been used effectively to prevent or reduce the size of debris accumulations at bridges and culverts. Structural measures can include features that: (a) intercept debris at or upstream of a structure inlet; (b) deflect debris near the inlet; or (c) orient the debris to facilitate passage of the debris through the structure. Non-structural measures include management of the upstream watershed and maintenance. This publication provides measures for both culvert and bridge structures. The measures available for culverts are based on the information included in earlier editions of this manual. Selection of a certain debris countermeasure depends upon the size, quantity, and type of debris, the potential hazard to life and property, the costs involved, and the maintenance proposed.
Publisher: Createspace Independent Pub
ISBN: 9781508680574
Category : Technology & Engineering
Languages : en
Pages : 182
Book Description
Debris accumulation at culvert and bridge structures openings is a widespread problem. The accumulation of debris at inlets of highway culverts and bridge structures is a frequent cause of unsatisfactory performance and malfunction. This accumulation may result in erosion at culvert entrances, overtopping and failure of roadway embankments and damage to adjacent properties, increased local scour at piers and/or abutments, and the formation of pressure flow scour. Consideration of debris accumulations and the need for debris-control structures should be an essential part of the design of all drainage structures. Structural and non-structural measures have been used effectively to prevent or reduce the size of debris accumulations at bridges and culverts. Structural measures can include features that: (a) intercept debris at or upstream of a structure inlet; (b) deflect debris near the inlet; or (c) orient the debris to facilitate passage of the debris through the structure. Non-structural measures include management of the upstream watershed and maintenance. This publication provides measures for both culvert and bridge structures. The measures available for culverts are based on the information included in earlier editions of this manual. Selection of a certain debris countermeasure depends upon the size, quantity, and type of debris, the potential hazard to life and property, the costs involved, and the maintenance proposed.
Debris-control Structures
Author: United States. Federal Highway Administration. Office of Engineering
Publisher:
ISBN:
Category : Culverts
Languages : en
Pages : 38
Book Description
Publisher:
ISBN:
Category : Culverts
Languages : en
Pages : 38
Book Description
Proceedings
Author:
Publisher:
ISBN:
Category : Hydraulic engineering
Languages : en
Pages : 336
Book Description
Publisher:
ISBN:
Category : Hydraulic engineering
Languages : en
Pages : 336
Book Description
Facilities Development Manual
Author: Wisconsin. Department of Transportation
Publisher:
ISBN:
Category : Highway planning
Languages : en
Pages : 334
Book Description
Publisher:
ISBN:
Category : Highway planning
Languages : en
Pages : 334
Book Description
2016GUIDELINES FOR INVESTIGATING GEOLOGIC HAZARDS AND PREPARING ENGINEERING-GEOLOGY REPORTS, WITH A SUGGESTED APPROACH TO GEOLOGIC-HAZARD ORDINANCES IN UTAH
Author: Steve D. Bowman
Publisher: Utah Geological Survey
ISBN: 1557919291
Category : Science
Languages : en
Pages : 217
Book Description
The purpose of these guidelines for investigating geologic hazards and preparing engineering-geology reports, is to provide recommendations for appropriate, minimum investigative techniques, standards, and report content to ensure adequate geologic site characterization and geologic-hazard investigations to protect public safety and facilitate risk reduction. Such investigations provide important information on site geologic conditions that may affect or be affected by development, as well as the type and severity of geologic hazards at a site, and recommend solutions to mitigate the effects and the cost of the hazards, both at the time of construction and over the life of the development. The accompanying suggested approach to geologic-hazard ordinances and school-site investigation guidelines are intended as an aid for land-use planning and regulation by local Utah jurisdictions and school districts, respectively. Geologic hazards that are not accounted for in project planning and design often result in additional unforeseen construction and/or future maintenance costs, and possible injury or death.
Publisher: Utah Geological Survey
ISBN: 1557919291
Category : Science
Languages : en
Pages : 217
Book Description
The purpose of these guidelines for investigating geologic hazards and preparing engineering-geology reports, is to provide recommendations for appropriate, minimum investigative techniques, standards, and report content to ensure adequate geologic site characterization and geologic-hazard investigations to protect public safety and facilitate risk reduction. Such investigations provide important information on site geologic conditions that may affect or be affected by development, as well as the type and severity of geologic hazards at a site, and recommend solutions to mitigate the effects and the cost of the hazards, both at the time of construction and over the life of the development. The accompanying suggested approach to geologic-hazard ordinances and school-site investigation guidelines are intended as an aid for land-use planning and regulation by local Utah jurisdictions and school districts, respectively. Geologic hazards that are not accounted for in project planning and design often result in additional unforeseen construction and/or future maintenance costs, and possible injury or death.
Debris Flow
Author: Tamotsu Takahashi
Publisher: CRC Press
ISBN: 0203576748
Category : Technology & Engineering
Languages : en
Pages : 563
Book Description
This is the 2nd edition of one of the most comprehensive accounts of debris flow, describing both theoretical and applied aspects. In the first part, the fundamental mechanical characteristics are discussed, including flow characteristics, type classification, mechanics, occurrence and development, fully developed flow, and deposition processes. Th
Publisher: CRC Press
ISBN: 0203576748
Category : Technology & Engineering
Languages : en
Pages : 563
Book Description
This is the 2nd edition of one of the most comprehensive accounts of debris flow, describing both theoretical and applied aspects. In the first part, the fundamental mechanical characteristics are discussed, including flow characteristics, type classification, mechanics, occurrence and development, fully developed flow, and deposition processes. Th
Landslide Risk Management
Author: Oldrich Hungr
Publisher: CRC Press
ISBN: 1439833710
Category : Technology & Engineering
Languages : en
Pages : 776
Book Description
Landslide Risk Management comprises the proceedings of the International Conference on Landslide Risk Management, held in Vancouver, Canada, from May 31 to June 3, 2005. The first part of the book contains state-of-the-art and invited lectures, prepared by teams of authors selected for their experience in specific topics assigned to them by the JTC
Publisher: CRC Press
ISBN: 1439833710
Category : Technology & Engineering
Languages : en
Pages : 776
Book Description
Landslide Risk Management comprises the proceedings of the International Conference on Landslide Risk Management, held in Vancouver, Canada, from May 31 to June 3, 2005. The first part of the book contains state-of-the-art and invited lectures, prepared by teams of authors selected for their experience in specific topics assigned to them by the JTC
Proceedings of the Federal Inter-Agency Sedimentation Conference, Held at Bureau of Reclamation Laboratories, Denver, May 6-8, 1947
Author:
Publisher:
ISBN:
Category : Sedimentation and deposition
Languages : en
Pages : 338
Book Description
Publisher:
ISBN:
Category : Sedimentation and deposition
Languages : en
Pages : 338
Book Description
Proceedings of the Federal Inter-Agency Sedimentation Conference
Author:
Publisher:
ISBN:
Category : Hydraulic engineering
Languages : en
Pages : 338
Book Description
Publisher:
ISBN:
Category : Hydraulic engineering
Languages : en
Pages : 338
Book Description
Bridge Maintenance Inspection and Evaluation, Second Edition
Author: Kenneth White
Publisher: CRC Press
ISBN: 1040291678
Category : Technology & Engineering
Languages : en
Pages : 366
Book Description
"Second Edition examines in detail the process of evaluating bridge conditions and offers a thorough study of bridge types - their origins, elements, and failures. Bridge Maintenance Inspection and Evaluation, Second Edition presents new and expanded information on condition ratings, capacity evaluations, load factor analysis, and the American Association of State Highway and Transportation Officials (AASHTO) suggested guidelines. "
Publisher: CRC Press
ISBN: 1040291678
Category : Technology & Engineering
Languages : en
Pages : 366
Book Description
"Second Edition examines in detail the process of evaluating bridge conditions and offers a thorough study of bridge types - their origins, elements, and failures. Bridge Maintenance Inspection and Evaluation, Second Edition presents new and expanded information on condition ratings, capacity evaluations, load factor analysis, and the American Association of State Highway and Transportation Officials (AASHTO) suggested guidelines. "