Author: Jean-Paul Massoud
Publisher:
ISBN:
Category :
Languages : fr
Pages : 164
Book Description
DEFINITION DES PARAMETRES IMPORTANTS DE L'EROSION DUE AUX IMPACTS DE PETITES PARTICULES SOLIDES. MISE EN EVIDENCE ET ANALYSE DES PRINCIPAUX MECANISMES D'ENLEVEMENT DE MATIERE (MICRO-USINAGE, DEFORMATION PLASTIQUE, FORMATION DE LANGUETTES...) OBSERVES LORS DE L'ENDOMMAGEMENT PAR EROSION DE L'ALLIAGE DE TITAN E TA6V. EXAMEN DE L'INFLUENCE DES PARAMETRES STRUCTURAUX SUR LE COMPORTEMENT A L'EROSION DE L'ALLIAGE. ETUDE DE L'EFFET DE TRAITEMENTS DE SURFACE (NITRURATION, CARBURATION, BORONITRURATION)
COMPORTEMENT A L'EROSION PAR DES PARTICULES SOLIDES D'UN ALLIAGE DE TITANE TA6V TRAITE PAR LASER
Author: Jean-Paul Massoud
Publisher:
ISBN:
Category :
Languages : fr
Pages : 164
Book Description
DEFINITION DES PARAMETRES IMPORTANTS DE L'EROSION DUE AUX IMPACTS DE PETITES PARTICULES SOLIDES. MISE EN EVIDENCE ET ANALYSE DES PRINCIPAUX MECANISMES D'ENLEVEMENT DE MATIERE (MICRO-USINAGE, DEFORMATION PLASTIQUE, FORMATION DE LANGUETTES...) OBSERVES LORS DE L'ENDOMMAGEMENT PAR EROSION DE L'ALLIAGE DE TITAN E TA6V. EXAMEN DE L'INFLUENCE DES PARAMETRES STRUCTURAUX SUR LE COMPORTEMENT A L'EROSION DE L'ALLIAGE. ETUDE DE L'EFFET DE TRAITEMENTS DE SURFACE (NITRURATION, CARBURATION, BORONITRURATION)
Publisher:
ISBN:
Category :
Languages : fr
Pages : 164
Book Description
DEFINITION DES PARAMETRES IMPORTANTS DE L'EROSION DUE AUX IMPACTS DE PETITES PARTICULES SOLIDES. MISE EN EVIDENCE ET ANALYSE DES PRINCIPAUX MECANISMES D'ENLEVEMENT DE MATIERE (MICRO-USINAGE, DEFORMATION PLASTIQUE, FORMATION DE LANGUETTES...) OBSERVES LORS DE L'ENDOMMAGEMENT PAR EROSION DE L'ALLIAGE DE TITAN E TA6V. EXAMEN DE L'INFLUENCE DES PARAMETRES STRUCTURAUX SUR LE COMPORTEMENT A L'EROSION DE L'ALLIAGE. ETUDE DE L'EFFET DE TRAITEMENTS DE SURFACE (NITRURATION, CARBURATION, BORONITRURATION)
Scientific and Technical Aerospace Reports
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 968
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 968
Book Description
2nd International Conference Laser M2P
Author: F. Stoeckel
Publisher:
ISBN:
Category : Laser lithotripsy
Languages : en
Pages : 872
Book Description
Publisher:
ISBN:
Category : Laser lithotripsy
Languages : en
Pages : 872
Book Description
Journal de Physique
Author:
Publisher:
ISBN:
Category : Physics
Languages : en
Pages : 908
Book Description
Publisher:
ISBN:
Category : Physics
Languages : en
Pages : 908
Book Description
Surface & Coatings Technology
Author: B. D. Sartwell
Publisher: Elsevier
ISBN: 1483274659
Category : Technology & Engineering
Languages : en
Pages : 981
Book Description
Surface & Coatings Technology, Volume 61 presents the proceeding of the 20th International Conference on Metallurgical Coatings and Thin Films, held in San Diego, California, on April 19–23, 1993. This book discusses a variety of topics related to surface and coatings technology, including coatings for use at high temperature, hard coatings, and vapor deposition technology. Organized into 141 chapters, this compilation of papers begins with an overview of the coating requirements for long-life bucket protection, how each of these coating systems has performed, and the advantages and disadvantages of each. This text then discusses the gradient-free transition step achieved in the element analysis of the depth profiles. Other chapters consider the metastable yttrium oxide films that are synthesized using reactive sputter deposition. This book discusses as well the use of appropriate copper-based alloy coatings on structural components. The final chapter deals with the particle mechanical and thermal behavior in the process of high velocity oxy-fuel spraying. This book is a valuable resource for chemical engineers and metallurgists.
Publisher: Elsevier
ISBN: 1483274659
Category : Technology & Engineering
Languages : en
Pages : 981
Book Description
Surface & Coatings Technology, Volume 61 presents the proceeding of the 20th International Conference on Metallurgical Coatings and Thin Films, held in San Diego, California, on April 19–23, 1993. This book discusses a variety of topics related to surface and coatings technology, including coatings for use at high temperature, hard coatings, and vapor deposition technology. Organized into 141 chapters, this compilation of papers begins with an overview of the coating requirements for long-life bucket protection, how each of these coating systems has performed, and the advantages and disadvantages of each. This text then discusses the gradient-free transition step achieved in the element analysis of the depth profiles. Other chapters consider the metastable yttrium oxide films that are synthesized using reactive sputter deposition. This book discusses as well the use of appropriate copper-based alloy coatings on structural components. The final chapter deals with the particle mechanical and thermal behavior in the process of high velocity oxy-fuel spraying. This book is a valuable resource for chemical engineers and metallurgists.
Government reports annual index
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 1134
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 1134
Book Description
1st International Laser M2P Conference
Author: R. Bacis
Publisher:
ISBN:
Category : Lasers
Languages : en
Pages : 844
Book Description
Publisher:
ISBN:
Category : Lasers
Languages : en
Pages : 844
Book Description
Metallurgical Coatings and Thin Films 1993
Author:
Publisher:
ISBN:
Category : Corrosion and anti-corrosives
Languages : en
Pages : 820
Book Description
Publisher:
ISBN:
Category : Corrosion and anti-corrosives
Languages : en
Pages : 820
Book Description
Élaboration et caractérisation de revêtements de nitrure et carbure de titane par laser continu sur l'alliage de titane TA6V
Author: Monique Collin
Publisher:
ISBN:
Category :
Languages : fr
Pages : 128
Book Description
Les traitements superficiels de nitruration et de carburation des alliages de titane permettent une augmentation de la durée de vie des matériaux travaillant en conditions d'usure et d'érosion.L'utilisation d'un laser continu de forte puissance (5 kW) a conduit à la réalisation de tels revêtements par traitements en atmosphère réactive (nitruration par diffusion d'azote) ou par apport de matière solide (carburation par graphitisation ou injection de poudres). L'obtention de structures caractéristiques est liée aux forts gradients de concentration et de température mis en jeu lors de l'interaction.L'apport de matière peut être réalisé avec ou sans passage par l'état liquide. La présence d'un bain de fusion au cours du traitement se traduit par une microstructure dendritique de la zone fondue, révélatrice d'une surfusion de constitution au refroidissement. Le plasma créé à la surface de l'échantillon varie dans sa forme et sa composition avec les paramètres d'essai. Ces variations peuvent être reliées à un changement dans les structures obtenues.La diffusion assistée par Laser consiste à faire agir le substrat à l'état solide avec une atmosphère réactive. L'étude de la couche de nitruration obtenue révèle une variation rapide de la teneur en azote dans l'échantillon. Des mesures quantitatives de la concentration en élément diffusant ainsi que des essais de dosage isotopique ont permis d'approcher un mécanisme de croissance de la couche.Le traitement superficiel de l'alliage TA6V par Laser permet donc d'obtenir des revêtements de nitrure de titane par diffusion d'azote à l'état solide et de carbure de titane par dilution de carbone dans le substrat fondu ; l'adhérence et la compacité des couches améliorent le comportement de pièces mécaniques vis-à-vis de l'érosion et du frottement.
Publisher:
ISBN:
Category :
Languages : fr
Pages : 128
Book Description
Les traitements superficiels de nitruration et de carburation des alliages de titane permettent une augmentation de la durée de vie des matériaux travaillant en conditions d'usure et d'érosion.L'utilisation d'un laser continu de forte puissance (5 kW) a conduit à la réalisation de tels revêtements par traitements en atmosphère réactive (nitruration par diffusion d'azote) ou par apport de matière solide (carburation par graphitisation ou injection de poudres). L'obtention de structures caractéristiques est liée aux forts gradients de concentration et de température mis en jeu lors de l'interaction.L'apport de matière peut être réalisé avec ou sans passage par l'état liquide. La présence d'un bain de fusion au cours du traitement se traduit par une microstructure dendritique de la zone fondue, révélatrice d'une surfusion de constitution au refroidissement. Le plasma créé à la surface de l'échantillon varie dans sa forme et sa composition avec les paramètres d'essai. Ces variations peuvent être reliées à un changement dans les structures obtenues.La diffusion assistée par Laser consiste à faire agir le substrat à l'état solide avec une atmosphère réactive. L'étude de la couche de nitruration obtenue révèle une variation rapide de la teneur en azote dans l'échantillon. Des mesures quantitatives de la concentration en élément diffusant ainsi que des essais de dosage isotopique ont permis d'approcher un mécanisme de croissance de la couche.Le traitement superficiel de l'alliage TA6V par Laser permet donc d'obtenir des revêtements de nitrure de titane par diffusion d'azote à l'état solide et de carbure de titane par dilution de carbone dans le substrat fondu ; l'adhérence et la compacité des couches améliorent le comportement de pièces mécaniques vis-à-vis de l'érosion et du frottement.
Government Reports Announcements & Index
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 1534
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 1534
Book Description