Author: Sandra Cabeza
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Characterization of Multiphase Metal Matrix Composites by Means of CT and Neutron Diffraction
Author: Sandra Cabeza
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Metal Matrix Composites
Author: Antonio Contreras Cuevas
Publisher: Springer
ISBN: 3319918540
Category : Technology & Engineering
Languages : en
Pages : 325
Book Description
This book covers several aspects of the synthesis of composites by the pressureless infiltration technique. It describes the methods used to obtain green preforms, such as cold pressed and hot sintering, describing the heating time, load, and time required for pressing the preforms. Additionally, wettability phenomena, which is directly related on infiltration, is extensively described. Wettability process and interfacial reactions are analyzed in many ceramic-metal systems prior to fabricate the composites. A complete description of fabrication processes for Metal Matrix Composites is included. An extensive section on structural, chemical, and mechanical characterization of composites fabricated with aluminum and magnesium alloys as matrices reinforced with titanium carbide (TiC), aluminum nitride (AlN), silicon carbide (SiC) and alumina (Al2O3) is included. Relevant techniques for joining composites, such as welding and brazing are addressed. As well as issues pertaining to the corrosion and wear of composites are discussed as well. Corrosion behavior of some composites exposed to aqueous media was analyzed. Corrosion of composites using TiC and SiC like reinforcement and Al, Ni, and some Al-Cux, Al-Mgx and Al-Cu-Li alloys like matrix is discussed extensively. The structural characterization techniques addressed include: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), optical microscopy (OM), differential thermal analysis (DTA), high resolution transmission electron microscopy (HRTEM), and thermogravimetry analysis (TGA). Mechanical testing including hardness, elastic modulus, tension tests, and impact tests were used in the characterization of composites. Theoretical models for prediction of some mechanical properties are included too.
Publisher: Springer
ISBN: 3319918540
Category : Technology & Engineering
Languages : en
Pages : 325
Book Description
This book covers several aspects of the synthesis of composites by the pressureless infiltration technique. It describes the methods used to obtain green preforms, such as cold pressed and hot sintering, describing the heating time, load, and time required for pressing the preforms. Additionally, wettability phenomena, which is directly related on infiltration, is extensively described. Wettability process and interfacial reactions are analyzed in many ceramic-metal systems prior to fabricate the composites. A complete description of fabrication processes for Metal Matrix Composites is included. An extensive section on structural, chemical, and mechanical characterization of composites fabricated with aluminum and magnesium alloys as matrices reinforced with titanium carbide (TiC), aluminum nitride (AlN), silicon carbide (SiC) and alumina (Al2O3) is included. Relevant techniques for joining composites, such as welding and brazing are addressed. As well as issues pertaining to the corrosion and wear of composites are discussed as well. Corrosion behavior of some composites exposed to aqueous media was analyzed. Corrosion of composites using TiC and SiC like reinforcement and Al, Ni, and some Al-Cux, Al-Mgx and Al-Cu-Li alloys like matrix is discussed extensively. The structural characterization techniques addressed include: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), optical microscopy (OM), differential thermal analysis (DTA), high resolution transmission electron microscopy (HRTEM), and thermogravimetry analysis (TGA). Mechanical testing including hardness, elastic modulus, tension tests, and impact tests were used in the characterization of composites. Theoretical models for prediction of some mechanical properties are included too.
Metal-Matrix Composites
Author: T. S. Srivatsan
Publisher: Springer Nature
ISBN: 3030925676
Category : Technology & Engineering
Languages : en
Pages : 382
Book Description
This collection brings together engineers, scientists, scholars, and entrepreneurs to present their novel and innovative contributions in the domain specific to metal-matrix composites and on aspects specific to processing, characterization, mechanical behavior, measurements, failure behavior, and kinetics governing microstructural influences on failure by fracture. Topics include but are not limited to: • Metals and metal-matrix composites • Nano-metal based composites • Intermetallic-based composites Contributions in the above topics connect to applications in industry-relevant areas: automotive; nuclear and clean energy; aerospace; failure analysis; biomedical and healthcare; and heavy equipment, machinery, and goods.
Publisher: Springer Nature
ISBN: 3030925676
Category : Technology & Engineering
Languages : en
Pages : 382
Book Description
This collection brings together engineers, scientists, scholars, and entrepreneurs to present their novel and innovative contributions in the domain specific to metal-matrix composites and on aspects specific to processing, characterization, mechanical behavior, measurements, failure behavior, and kinetics governing microstructural influences on failure by fracture. Topics include but are not limited to: • Metals and metal-matrix composites • Nano-metal based composites • Intermetallic-based composites Contributions in the above topics connect to applications in industry-relevant areas: automotive; nuclear and clean energy; aerospace; failure analysis; biomedical and healthcare; and heavy equipment, machinery, and goods.
Metal Matrix Composites
Author: W. Steven Johnson
Publisher: ASTM International
ISBN: 080311270X
Category : Fracture mechanics
Languages : en
Pages : 289
Book Description
Fourteen peer-reviewed papers on testing techniques, analysis approaches, and descriptions of various failure processes. From the Symposium on [title] held at Sparks, NV, April 1988. Annotation copyright Book News, Inc. Portland, Or.
Publisher: ASTM International
ISBN: 080311270X
Category : Fracture mechanics
Languages : en
Pages : 289
Book Description
Fourteen peer-reviewed papers on testing techniques, analysis approaches, and descriptions of various failure processes. From the Symposium on [title] held at Sparks, NV, April 1988. Annotation copyright Book News, Inc. Portland, Or.
Characterization and Design Mechanics for Fiber-reinforced Metals
Author: Christos C. Chamis
Publisher:
ISBN:
Category : Fibrous composites
Languages : en
Pages : 52
Book Description
Publisher:
ISBN:
Category : Fibrous composites
Languages : en
Pages : 52
Book Description
Metal-Matrix Composites
Author: T. S. Srivatsan
Publisher: Springer Nature
ISBN: 3030652491
Category : Science
Languages : en
Pages : 281
Book Description
This collection brings together engineers, scientists, scholars, and entrepreneurs to present their novel and innovative contributions in the domain specific to metal-matrix composites and on aspects specific to modeling, analysis, measurements, and observations specific to microstructural advances. Topics include but are not limited to: · Metals and metal-matrix composites · Nano-metal based composites · Intermetallic-based composites Contributions in the above topics connect to applications in industry-relevant areas: automotive, energy applications, aerospace, failure analysis, biomedical and healthcare, and heavy equipment and machinery.
Publisher: Springer Nature
ISBN: 3030652491
Category : Science
Languages : en
Pages : 281
Book Description
This collection brings together engineers, scientists, scholars, and entrepreneurs to present their novel and innovative contributions in the domain specific to metal-matrix composites and on aspects specific to modeling, analysis, measurements, and observations specific to microstructural advances. Topics include but are not limited to: · Metals and metal-matrix composites · Nano-metal based composites · Intermetallic-based composites Contributions in the above topics connect to applications in industry-relevant areas: automotive, energy applications, aerospace, failure analysis, biomedical and healthcare, and heavy equipment and machinery.
Nondestructive Characterization of Materials II
Author: Jean F. Bussière
Publisher: Springer
ISBN:
Category : Science
Languages : en
Pages : 816
Book Description
The possibility of nondestructively characterizing the microstruc ture, morphology or mechanical properties of materials is certainly a fascinating subject. In principle, such techniques can be used at all stages of a material's life - from the early stages of processing, to the end of a structural component's useful life. Interest in the subject thus arises not only from a purely scientific point of view but is also strongly motivated by economic pressures to improve productivity and quality in manufacturing, to insure the reliability and extend the life of existing structures. The present volume represents the edited papers presented at the Second International Symposium on the Nondestructive Characterization of Materials, held in Montreal, Canada, July 21-23, 1986. The Proceedings are divided into eight sections, which reflect the multidisciplinary nature of characterizing materials nondestructively: Polymers and Composites, Ceramics and Powder Metallurgy, Metals, Layered Structures/Adhesive Bonds/Welding, Degradation/Aging, Texture/ Anisotropy, Stress, and New Techniques. Invited papers by R. Hadcock of Grumman Aircraft Systems, R. Cannon of Rutgers University, H. Yada of Nippon Steel and R. Bridenbaugh of Alcoa review respectively the processing of polymer matrix composites, ceramics, steel and aluminum, emphasizing the need for material property sensors to improve process and quality control. Two other invited papers, one by A. Wedgwood of Harwell and the other by P. Holler of the IzFP in Saarbrucken review state of the art techniques to characterize particulate matter and metals respectively.
Publisher: Springer
ISBN:
Category : Science
Languages : en
Pages : 816
Book Description
The possibility of nondestructively characterizing the microstruc ture, morphology or mechanical properties of materials is certainly a fascinating subject. In principle, such techniques can be used at all stages of a material's life - from the early stages of processing, to the end of a structural component's useful life. Interest in the subject thus arises not only from a purely scientific point of view but is also strongly motivated by economic pressures to improve productivity and quality in manufacturing, to insure the reliability and extend the life of existing structures. The present volume represents the edited papers presented at the Second International Symposium on the Nondestructive Characterization of Materials, held in Montreal, Canada, July 21-23, 1986. The Proceedings are divided into eight sections, which reflect the multidisciplinary nature of characterizing materials nondestructively: Polymers and Composites, Ceramics and Powder Metallurgy, Metals, Layered Structures/Adhesive Bonds/Welding, Degradation/Aging, Texture/ Anisotropy, Stress, and New Techniques. Invited papers by R. Hadcock of Grumman Aircraft Systems, R. Cannon of Rutgers University, H. Yada of Nippon Steel and R. Bridenbaugh of Alcoa review respectively the processing of polymer matrix composites, ceramics, steel and aluminum, emphasizing the need for material property sensors to improve process and quality control. Two other invited papers, one by A. Wedgwood of Harwell and the other by P. Holler of the IzFP in Saarbrucken review state of the art techniques to characterize particulate matter and metals respectively.
Testing Technology of Metal Matrix Composites
Author: N. R. Adsit
Publisher: ASTM International
ISBN: 0803109679
Category : Alloys
Languages : en
Pages : 445
Book Description
Publisher: ASTM International
ISBN: 0803109679
Category : Alloys
Languages : en
Pages : 445
Book Description
Advanced Topics in Characterization of Composites
Author: Michael R. Kessler
Publisher: Trafford Publishing
ISBN: 1412036399
Category : Education
Languages : en
Pages : 204
Book Description
Advanced Topics in Characterization of Composites is a product of the ''Characterization of Composite Materials" graduate course in the Department of Mechanical Engineering at The University of Tulsa. It contains a series of chapters describing characterization techniques for polymer-matrix composite materials. Topics covered include: -thermal analysis using DSC, -residual stresses, -single-fiber fragmentation testing, -creep and creep nature, -impact testing, -infrared thermography, -air-coupled ultrasonics, -structural health monitoring, and -fractography. The chapters include comprehensive literature reviews, background information, and best practices in experimental composites evaluation.
Publisher: Trafford Publishing
ISBN: 1412036399
Category : Education
Languages : en
Pages : 204
Book Description
Advanced Topics in Characterization of Composites is a product of the ''Characterization of Composite Materials" graduate course in the Department of Mechanical Engineering at The University of Tulsa. It contains a series of chapters describing characterization techniques for polymer-matrix composite materials. Topics covered include: -thermal analysis using DSC, -residual stresses, -single-fiber fragmentation testing, -creep and creep nature, -impact testing, -infrared thermography, -air-coupled ultrasonics, -structural health monitoring, and -fractography. The chapters include comprehensive literature reviews, background information, and best practices in experimental composites evaluation.
Metal Matrix Composites
Author: G.M. Newaz
Publisher: Trans Tech Publications Ltd
ISBN: 3035703531
Category : Technology & Engineering
Languages : en
Pages : 928
Book Description
Fundamental and applied research efforts to develop, characterize, and design structures with high temperature composite materials such as metal matrix composites (MMCs) are underway across the continents. New processing methods, evaluation of critical material properties, constitutive modeling, performance prediction are important needs which are essential for effective utilization and application of these materials.
Publisher: Trans Tech Publications Ltd
ISBN: 3035703531
Category : Technology & Engineering
Languages : en
Pages : 928
Book Description
Fundamental and applied research efforts to develop, characterize, and design structures with high temperature composite materials such as metal matrix composites (MMCs) are underway across the continents. New processing methods, evaluation of critical material properties, constitutive modeling, performance prediction are important needs which are essential for effective utilization and application of these materials.