Author: Helmut J. Helpenstein
Publisher: Springer Science & Business Media
ISBN: 364278335X
Category : Computers
Languages : en
Pages : 444
Get Book Here
Book Description
The Product Data Technology Advisory Group, short PDTAG, was established on 30 September 1992 under the auspices of the ESPRIT CIME Division of the Directorate General XIII of the European Commission. Its goals include promoting European cooperation and improving the European infrastructure in Product Data Technology, particularly in connection with the new standard STEP (ISO 10303). The dissemination of information on Product Data Technology and on European contributions to STEP is of crucial importance to this development. The current volume is the first title in a new PDTAG subseries to Springer Publishers' Research Reports ESPRIT. This new subseries intends to form a comprehensive repository of publications on Product Data Technology resulting from ESPRIT Projects and from European contributions to standardisation based on ISO/STEP. PDTAG welcomes the opportunity to make this information more accessible under the format of a coherent subseries within the established framework of Research Reports ESPRIT. Much valuable background on the new international PDT standard can thus be found in the same collection.
Author: Myer Kutz
Publisher: John Wiley & Sons
ISBN: 1118112849
Category : Technology & Engineering
Languages : en
Pages : 880
Get Book Here
Book Description
Full coverage of manufacturing and management in mechanical engineering Mechanical Engineers' Handbook, Fourth Edition provides a quick guide to specialized areas that engineers may encounter in their work, providing access to the basics of each and pointing toward trusted resources for further reading, if needed. The book's accessible information offers discussions, examples, and analyses of the topics covered, rather than the straight data, formulas, and calculations found in other handbooks. No single engineer can be a specialist in all areas that they are called upon to work in. It's a discipline that covers a broad range of topics that are used as the building blocks for specialized areas, including aerospace, chemical, materials, nuclear, electrical, and general engineering. This third volume of Mechanical Engineers' Handbook covers Manufacturing & Management, and provides accessible and in-depth access to the topics encountered regularly in the discipline: environmentally benign manufacturing, production planning, production processes and equipment, manufacturing systems evaluation, coatings and surface engineering, physical vapor deposition, mechanical fasteners, seal technology, statistical quality control, nondestructive inspection, intelligent control of material handling systems, and much more. Presents the most comprehensive coverage of the entire discipline of Mechanical Engineering Focuses on the explanation and analysis of the concepts presented as opposed to a straight listing of formulas and data found in other handbooks Offers the option of being purchased as a four-book set or as single books Comes in a subscription format through the Wiley Online Library and in electronic and other custom formats Engineers at all levels of industry, government, or private consulting practice will find Mechanical Engineers' Handbook, Volume 3 an "off-the-shelf" reference they'll turn to again and again.
Author: Kuang-Hua Chang
Publisher: Academic Press
ISBN: 0128097361
Category : Computers
Languages : en
Pages : 1228
Get Book Here
Book Description
e-Design: Computer-Aided Engineering Design, Revised First Edition is the first book to integrate a discussion of computer design tools throughout the design process. Through the use of this book, the reader will understand basic design principles and all-digital design paradigms, the CAD/CAE/CAM tools available for various design related tasks, how to put an integrated system together to conduct All-Digital Design (ADD), industrial practices in employing ADD, and tools for product development. - Comprehensive coverage of essential elements for understanding and practicing the e-Design paradigm in support of product design, including design method and process, and computer based tools and technology - Part I: Product Design Modeling discusses virtual mockup of the product created in the CAD environment, including not only solid modeling and assembly theories, but also the critical design parameterization that converts the product solid model into parametric representation, enabling the search for better design alternatives - Part II: Product Performance Evaluation focuses on applying CAE technologies and software tools to support evaluation of product performance, including structural analysis, fatigue and fracture, rigid body kinematics and dynamics, and failure probability prediction and reliability analysis - Part III: Product Manufacturing and Cost Estimating introduces CAM technology to support manufacturing simulations and process planning, sheet forming simulation, RP technology and computer numerical control (CNC) machining for fast product prototyping, as well as manufacturing cost estimate that can be incorporated into product cost calculations - Part IV: Design Theory and Methods discusses modern decision-making theory and the application of the theory to engineering design, introduces the mainstream design optimization methods for both single and multi-objectives problems through both batch and interactive design modes, and provides a brief discussion on sensitivity analysis, which is essential for designs using gradient-based approaches - Tutorial lessons and case studies are offered for readers to gain hands-on experiences in practicing e-Design paradigm using two suites of engineering software: Pro/ENGINEER-based, including Pro/MECHANICA Structure, Pro/ENGINEER Mechanism Design, and Pro/MFG; and SolidWorks-based, including SolidWorks Simulation, SolidWorks Motion, and CAMWorks. Available on the companion website http://booksite.elsevier.com/9780123820389
Author: Sudip S. Bhattacharjee
Publisher: CRC Press
ISBN: 100041230X
Category : Science
Languages : en
Pages : 341
Get Book Here
Book Description
Finite Element Analysis of Solids and Structures combines the theory of elasticity (advanced analytical treatment of stress analysis problems) and finite element methods (numerical details of finite element formulations) into one academic course derived from the author’s teaching, research, and applied work in automotive product development as well as in civil structural analysis. Features Gives equal weight to the theoretical details and FEA software use for problem solution by using finite element software packages Emphasizes understanding the deformation behavior of finite elements that directly affect the quality of actual analysis results Reduces the focus on hand calculation of property matrices, thus freeing up time to do more software experimentation with different FEA formulations Includes chapters dedicated to showing the use of FEA models in engineering assessment for strength, fatigue, and structural vibration properties Features an easy to follow format for guided learning and practice problems to be solved by using FEA software package, and with hand calculations for model validation This textbook contains 12 discrete chapters that can be covered in a single semester university graduate course on finite element analysis methods. It also serves as a reference for practicing engineers working on design assessment and analysis of solids and structures. Teaching ancillaries include a solutions manual (with data files) and lecture slides for adopting professors.
Author: Yves Weinand
Publisher: Routledge
ISBN: 1000430596
Category : Technology & Engineering
Languages : en
Pages : 161
Get Book Here
Book Description
Design of Integrally-Attached Timber Plate Structures outlines a new design methodology for digitally fabricated spatial timber plate structures, presented with examples from recent construction projects. It proposes an innovative and sustainable design methodology, algorithmic geometry processing, structural optimization, and digital fabrication; technology transfer and construction are formulated and widely discussed. The methodology relies on integral mechanical attachment whereby the connection between timber plates is established solely through geometric manipulation, without additional connectors, such as nails, screws, dowels, adhesives, or welding. The transdisciplinary design framework for spatial timber plate structures brings together digital architecture, computer science, and structural engineering, covering parametric modeling and architectural computational design, geometry exploration, the digital fabrication assembly of engineered timber panels, numerical simulations, mechanical characterization, design optimization, and performance improvement. The method is demonstrated through different prototypes, physical models, and three build examples, focusing specifically on the design of the timber-plate roof structure of 23 large span arches called the Annen Headquarters in Luxembourg. This is useful for the architecture, engineering, and construction (AEC) sector and shows how new structural optimization processes can be reinvented through geometrical adaptions to control global and local geometries of complex structures. This text is ideal for structural engineering professionals and architects in both industry and academia, and construction companies.
Author: Xu, Xun
Publisher: IGI Global
ISBN: 1599047160
Category : Computers
Languages : en
Pages : 424
Get Book Here
Book Description
"This book presents basic principles of geometric modelling while featuring contemporary industrial case studies"--Provided by publisher.
Author: Caterina Rizzi
Publisher: Springer Nature
ISBN: 3030912345
Category : Technology & Engineering
Languages : en
Pages : 968
Get Book Here
Book Description
This book gathers original papers reporting on innovative methods and tools in design, modelling, simulation and optimization, and their applications in engineering design, manufacturing and other relevant industrial sectors. Topics span from advances in geometric modelling, applications of virtual reality, innovative strategies for product development and additive manufacturing, human factors and user-centered design, engineering design education and applications of engineering design methods in medical rehabilitation and cultural heritage. Chapters are based on contributions to the Second International Conference on Design Tools and Methods in Industrial Engineering, ADM 2021, held on September 9–10, 2021, in Rome, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, and Dipartimento di Ingegneria Meccanica e Aerospaziale of Sapienza Università di Roma, Italy. All in all, this book provides academics and professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing.
Author: James J. (Jong Hyuk) Park
Publisher: Springer Science & Business
ISBN: 3642549004
Category : Technology & Engineering
Languages : en
Pages : 491
Get Book Here
Book Description
The aims of these proceedings are to provide a complete coverage of the areas outlined, and to bring together researchers from academic and industry to share ideas, challenges, and solutions relating to the multifaceted aspects of this field. New multimedia standards (for example, MPEG-21) facilitate the seamless integration of multiple modalities into interoperable multimedia frameworks, transforming the way people work and interact with multimedia data. These key technologies and multimedia solutions interact and collaborate with each other in increasingly effective ways, contributing to the multimedia revolution and having a significant impact across a wide spectrum of consumer, business, healthcare, education, and governmental domains.
Author: Kuang-Hua Chang
Publisher: Academic Press
ISBN: 012398517X
Category : Technology & Engineering
Languages : en
Pages : 439
Get Book Here
Book Description
Product Design Modeling using CAD/CAE is the third part of a four-part series. It is the first book to integrate discussion of computer design tools throughout the design process. Through this book, you will: - Understand basic design principles and all digital design paradigms - Understand computer-aided design, engineering, and manufacturing (CAD/CAE/CAM) tools available for various design-related tasks - Understand how to put an integrated system together to conduct all-digital design (ADD) - Provides a comprehensive and thorough coverage of essential elements for product modeling using the virtual engineering paradigm - Covers CAD/CAE in product design, including solid modeling, mechanical assembly, parameterization, product data management, and data exchange in CAD - Case studies and tutorial examples at the end of each chapter provide hands-on practice in implementing off-the-shelf computer design tools - Provides two projects showing the use of Pro/ENGINEER and SolidWorks to implement concepts discussed in the book
Author: Bartlomiej F. Romanowicz
Publisher: Springer Science & Business Media
ISBN: 146155621X
Category : Technology & Engineering
Languages : en
Pages : 156
Get Book Here
Book Description
Over the past two decades, technologies for microsystems fabrication have made considerable progress. This has made possible a large variety of new commercial devices ranging, for example, from integrated pressure and acceleration microsensors to active micromirror arrays for image projection. In the near future, there will be a number of new devices, which will be commercialized in many application areas. The field of microsystems is characterized by its wide diversity, which requires a multidisciplinary approach for design and processes as well as in application areas. Although there is a common technological background derived from integrated circuits, it is clear that microsystems will require additional application-specific technologies. Since most microsystem technologies are based on batch processing and dedicated to mass production, prototyping is likely to be an expensive and time-consuming step. It is recognized that standardization of the processes as well as of the design tools will definitely help reduce the entry cost of microsystems. This creates a very challenging situation for the design, modeling and simulation of microsystems. Methodology for the Modeling and Simulation of Microsystems is the first book to give an overview of the problems associated with modeling and simulation of microsystems. It introduces a new methodology, which is supported by several examples. It should provide a useful starting point for both scientists and engineers seeking background information for efficient design of microsystems.
