Bubble Dynamics, Two-Phase Flow, and Boiling Heat Transfer in Microgravity PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Bubble Dynamics, Two-Phase Flow, and Boiling Heat Transfer in Microgravity PDF full book. Access full book title Bubble Dynamics, Two-Phase Flow, and Boiling Heat Transfer in Microgravity by National Aeronautics and Space Administration (NASA). Download full books in PDF and EPUB format.
Author: National Aeronautics and Space Administration (NASA)
Publisher: Createspace Independent Publishing Platform
ISBN: 9781723536205
Category :
Languages : en
Pages : 292
Get Book Here
Book Description
This report contains two independent sections. Part one is titled Terrestrial and Microgravity Pool Boiling Heat Transfer and Critical heat flux phenomenon in an acoustic standing wave. Terrestrial and microgravity pool boiling heat transfer experiments were performed in the presence of a standing acoustic wave from a platinum wire resistance heater using degassed FC-72 Fluorinert liquid. The sound wave was created by driving a half wavelength resonator at a frequency of 10.15 kHz. Microgravity conditions were created using the 2.1 second drop tower on the campus of Washington State University. Burnout of the heater wire, often encountered with heat flux controlled systems, was avoided by using a constant temperature controller to regulate the heater wire temperature. The amplitude of the acoustic standing wave was increased from 28 kPa to over 70 kPa and these pressure measurements were made using a hydrophone fabricated with a small piezoelectric ceramic. Cavitation incurred during experiments at higher acoustic amplitudes contributed to the vapor bubble dynamics and heat transfer. The heater wire was positioned at three different locations within the acoustic field: the acoustic node, antinode, and halfway between these locations. Complete boiling curves are presented to show how the applied acoustic field enhanced boiling heat transfer and increased critical heat flux in microgravity and terrestrial environments. Video images provide information on the interaction between the vapor bubbles and the acoustic field. Part two is titled, Design and qualification of a microscale heater array for use in boiling heat transfer. This part is summarized herein. Boiling heat transfer is an efficient means of heat transfer because a large amount of heat can be removed from a surface using a relatively small temperature difference between the surface and the bulk liquid. However, the mechanisms that govern boiling heat transfer are not well understood. Measurements of wall te...
Author: National Aeronautics and Space Administration (NASA)
Publisher: Createspace Independent Publishing Platform
ISBN: 9781723536205
Category :
Languages : en
Pages : 292
Get Book Here
Book Description
This report contains two independent sections. Part one is titled Terrestrial and Microgravity Pool Boiling Heat Transfer and Critical heat flux phenomenon in an acoustic standing wave. Terrestrial and microgravity pool boiling heat transfer experiments were performed in the presence of a standing acoustic wave from a platinum wire resistance heater using degassed FC-72 Fluorinert liquid. The sound wave was created by driving a half wavelength resonator at a frequency of 10.15 kHz. Microgravity conditions were created using the 2.1 second drop tower on the campus of Washington State University. Burnout of the heater wire, often encountered with heat flux controlled systems, was avoided by using a constant temperature controller to regulate the heater wire temperature. The amplitude of the acoustic standing wave was increased from 28 kPa to over 70 kPa and these pressure measurements were made using a hydrophone fabricated with a small piezoelectric ceramic. Cavitation incurred during experiments at higher acoustic amplitudes contributed to the vapor bubble dynamics and heat transfer. The heater wire was positioned at three different locations within the acoustic field: the acoustic node, antinode, and halfway between these locations. Complete boiling curves are presented to show how the applied acoustic field enhanced boiling heat transfer and increased critical heat flux in microgravity and terrestrial environments. Video images provide information on the interaction between the vapor bubbles and the acoustic field. Part two is titled, Design and qualification of a microscale heater array for use in boiling heat transfer. This part is summarized herein. Boiling heat transfer is an efficient means of heat transfer because a large amount of heat can be removed from a surface using a relatively small temperature difference between the surface and the bulk liquid. However, the mechanisms that govern boiling heat transfer are not well understood. Measurements of wall te...
Author: Edward J. Kelly
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Fluid dynamics (Space environment)
Languages : en
Pages : 494
Get Book Here
Book Description
Author: Jian-Fu Zhao
Publisher:
ISBN:
Category : Biotechnology
Languages : en
Pages : 19
Get Book Here
Book Description
A series of experimental studies on bubble dynamical behaviors and heat transfer in pool boiling on thin wires in different gravity conditions have been performed in the past years, including experiments in long-term microgravity aboard the 22nd Chinese recoverable satellite RS-22, in short-term microgravity in the drop tower Beijing, and in normal gravity on the ground. Steady pool boiling of degassed R113 on thin platinum wires has been studied using a temperature-controlled heating method. A voltage-controlled heating method has also been used in normal gravity. A slight enhancement of nucleate boiling heat transfer is observed in microgravity, while dramatic changes of bubble behaviors are very evident. Considering the influence of the Marangoni effects, the different characteristics of bubble behaviors in microgravity have been explained. A new bubble departure model including the influence of the Marangoni effects has also been proposed, which can predict the whole observation both in microgravity and in normal gravity. The value of CHF (critical heat flux) in microgravity is lower than that in normal gravity, but it can be predicted well by the Lienhard-Dhir correlation, although the dimensionless radius, or the square root of the Bond number, in the present case is far beyond its initial application range. A further revisit on the scaling of CHF with heater radius in normal gravity, which is focused on the case of a small Bond number, has also been performed in our laboratory using different kinds of working fluids at different subcooling conditions. Interactions between the influences of the subcooling and heater radius will be important for the case of a small Bond number. In addition to the Bond number, there may exist some other parameters, which may be material-dependent, that play important roles in the CHF phenomenon with a small Bond number.
Author: V. K. Dhir
Publisher: Begell House Publishers
ISBN: 9781567001471
Category : Fluid dynamics (Space environment)
Languages : en
Pages : 196
Get Book Here
Book Description
Author: John R Thome
Publisher: World Scientific
ISBN: 9814623296
Category : Technology & Engineering
Languages : en
Pages : 1321
Get Book Here
Book Description
The aim of the two-set series is to present a very detailed and up-to-date reference for researchers and practicing engineers in the fields of mechanical, refrigeration, chemical, nuclear and electronics engineering on the important topic of two-phase heat transfer and two-phase flow. The scope of the first set of 4 volumes presents the fundamentals of the two-phase flows and heat transfer mechanisms, and describes in detail the most important prediction methods, while the scope of the second set of 4 volumes presents numerous special topics and numerous applications, also including numerical simulation methods.Practicing engineers will find extensive coverage to applications involving: multi-microchannel evaporator cold plates for electronics cooling, boiling on enhanced tubes and tube bundles, flow pattern based methods for predicting boiling and condensation inside horizontal tubes, pressure drop methods for singularies (U-bends and contractions), boiling in multiport tubes, and boiling and condensation in plate heat exchangers. All of these chapters include the latest methods for predicting not only local heat transfer coefficients but also pressure drops.Professors and students will find this 'Encyclopedia of Two-Phase Heat Transfer and Flow' particularly exciting, as it contains authored books and thorough state-of-the-art reviews on many basic and special topics, such as numerical modeling of two-phase heat transfer and adiabatic bubbly and slug flows, the unified annular flow boiling model, flow pattern maps, condensation and boiling theories, new emerging topics, etc.
Author: Rodolfo Monti
Publisher: CRC Press
ISBN: 9780415275811
Category : Science
Languages : en
Pages : 630
Get Book Here
Book Description
In a microgravity experiment, the conditions prevalent in fluid phases can be substantially different from those on the ground and can be exploited to improve different processes. Fluid physics research in microgravity is important for the advancement of all microgravity scients: life, material, and engineering. Space flight provides a unique laboratory that allows scientists to improve their understanding of the behaviour of fluids in low gravity, allowing the investigation of phenomena and processes normally masked by the effects of gravity and thus difficult to study on Earth. Physics of Fluids in Microgravity provides a clear view of recent research and progress in the different fields of fluid research in space. The topics presented include bubles and drops dynamics, Maragoni flows, diffustion and thermodiffusion, solidfication,a nd crystal growth. The results obtained so far are, in some cases, to be confirmed by extensive research activities on the International Space station, where basic and applied microgravity experimentation will take place in the years to come.
Author: S.G. Kandlikar
Publisher: Routledge
ISBN: 1351442198
Category : Science
Languages : en
Pages : 786
Get Book Here
Book Description
Provides a comprehensive coverage of the basic phenomena. It contains twenty-five chapters which cover different aspects of boiling and condensation. First the specific topic or phenomenon is described, followed by a brief survey of previous work, a phenomenological model based on current understanding, and finally a set of recommended design equa
Author: Kamiel S. Gabriel
Publisher: Springer Science & Business Media
ISBN: 1402051433
Category : Technology & Engineering
Languages : en
Pages : 252
Get Book Here
Book Description
Multiphase thermal systems have numerous applications in aerospace, heat-exchange, transport of contaminants in environmental systems, and energy transport and conversion systems. A reduced - or microgravity - environment provides an excellent tool for accurate study of the flow without the masking effects of gravity. This book presents for the first time a comprehensive coverage of all aspects of two-phase flow behaviour in the virtual absence of gravity.
Author: Yohann Lilian Rousselet
Publisher:
ISBN:
Category :
Languages : en
Pages : 303
Get Book Here
Book Description
Knowledge of the physical mechanisms governing bubble dynamics and two-phase heat transfer is critical in order to accurately predict and scale the performance of two-phase systems, most importantly in low-g environments. To better understand flow boiling, especially under microgravity conditions, the dynamics of single and multiple bubbles under different levels of bulk liquid velocity, surface orientation, contact angle, and substrate materials are studied in this work. Microfabricated cavities at the center of a flat heating surface are used to generate bubbles. Silicon and aluminum are used as substrate materials, with contact angles of 56° and 19°, respectively, with water as test liquid. The investigated bulk liquid velocities ranged from 0 m/s to 0.25 m/s, while surface orientation varies from horizontal to vertical, through 30°, 45° and 60°, and cavity spacing from 0.4 mm to 1.2 mm, in upflow conditions. Bulk liquid temperature was set close to saturation temperature, with bulk liquid subcooling less than 1° C, and wall superheat was maintained between 5.0° C and 6.0 °C. Based on the experimental data, a simple force balance model was developed, and is used to develop a model to predict bubble lift off. These forces are the lift force (F_b), the buoyancy force (F_b), the surface tension force (F_s), the contact pressure force (F_cp), and the inertia of both the vapor and the liquid displaced by the growing bubble. It is showed that at the instant when bubble lift off is initiated, the sum of forces acting on the bubble is equal to zero (and then becomes positive in the direction normal to the heater). This force balance is used to develop an expression for bubble lift off diameter. It also is found that for single and merged bubbles, when lift off occurs, buoyancy and lift forces are the only forces acting on the bubble, regardless of orientation, contact angle and flow velocity, and that for all cases, the ratio (F_b + F1) / A1 is constant and equal to 2.25 N/m2, where A1 is the bubble surface area at lift off.
