Bell Canyon Test (BCT) Cement Grout Development Report PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Bell Canyon Test (BCT) Cement Grout Development Report PDF full book. Access full book title Bell Canyon Test (BCT) Cement Grout Development Report by Charles W. Gulick. Download full books in PDF and EPUB format.
Author: Charles W. Gulick
Publisher:
ISBN:
Category : Grout (Mortar)
Languages : en
Pages : 77
Get Book Here
Book Description
Author: Charles W. Gulick
Publisher:
ISBN:
Category : Grout (Mortar)
Languages : en
Pages : 77
Get Book Here
Book Description
Author: Charles W. Gulick
Publisher:
ISBN:
Category : Grout (Mortar)
Languages : en
Pages : 77
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
The Borehole Plugging (BHP) materials development program which has been underway at WES under Sandia sponsorship for about five years is reviewed. Development testing data for candidate grout mixtures for the BCT plug are presented. Field batching, mixing, and placement operations are discussed. Data from field samples molded during the two plug placements include strength, expansion, compressional wave velocity, dynamic modulus, density, and porosity. Microstructure and composition are compared for grout samples at ages of a few weeks and one year.
Author: Jay E. Rhoderick
Publisher:
ISBN:
Category : Grout (Mortar).
Languages : en
Pages : 28
Get Book Here
Book Description
Author: A. D. Buck
Publisher:
ISBN:
Category :
Languages : en
Pages : 56
Get Book Here
Book Description
Bell Canyon Test (BCT) 1-FF grout was developed as a candidate material for use in repository sealing applications and was actually used in two field tests in New Mexico. This grout and modifications of it were made in the laboratory and tested or examined for workability, compressive strength, restrained expansion, permeability, phase composition, and microstructure. Most of these were done to an age of 1 year. Compressive strength and expansion data were determined beyond this age (960 days). Modifications included use of three other cements, two other fly ashes, a silica fume, different water contents, and different amounts of expansive additive (plaster). Each cement and mineral admixture was characterized by conventional chemical and physical tests as well as by X-ray diffraction examination. In general, the results indicated that the modifications to the basic BCT-1-FF grout produced other grouts that were as good as it. An exception to this was the grout mixture (M-8-C) made with shrinkage compensating expansive cement; it has an excessive flow time (>20 sec). Another grout mixture (M-9-C) also had excessive flow time and lower strength. It was thought that these problems could be solved with more modification to these two mixtures. (Author).
Author: Jay E. Rhoderick
Publisher:
ISBN:
Category : Borehole plugging
Languages : en
Pages : 24
Get Book Here
Book Description
Portland cement grout identified as BCT-1-FF (Bell Canyon Test 1-FF) was used in borehole plugging experiments in the Bell Canyon Tests in Hole AEC-7 at the Waste Isolation Pilot Plant site in New Mexico during September 1979 and February 1980. This grout was made with fresh water. A study of this grout was begun in August 1979 in the laboratory to evaluate the possible effects of temperature, pressure, and storage in fresh water or simulated groundwater (brine) on its phase composition and compressive strength at early ages. Phase composition was determined by X-ray diffraction. Temperatures ranged up to about 150 F and included elevation at a few hours age after mixing; pressure was as high as 1500 psi; specimens were stored in simulated groundwater (brine) or in fresh water. Data from 1 to 90 days showed: Higher temperature accelerated early strength gain. These differences essentially vanished by 90 days age. Hydration products as identified by X-ray diffraction were normal; this indicated that a temperature range of 78 to 153 F was not significant. Pressure did not affect composition. Storage in simulated groundwater (brine) or fresh water had no detectable effect. Since the BCT-1-FF grout mixture contained added sulfate, it formed more ettringite as judged by X-ray diffraction than comparable portland cement mixtures without added sulfate. (Author).
Author: Alan D. Buck
Publisher:
ISBN:
Category : Grout (Mortar).
Languages : en
Pages : 40
Get Book Here
Book Description
Some of the considerations involved in the development of hydraulic cement-based grout mixtures intended for use in the isolation of nuclear waste stored underground are longevity, impermeability, uniformity, ease of placement, and relevance to previously used systems. Work done at the Structures Laboratory of the U.S. Army Engineer Waterways Experiment Station on this subject has indicated that apparently adequate systems can be based on well known ingredients. Information on field testing and long-term testing of these grouts has confirmed this indication. The following conclusions are indicated: (a) Selection of control parameters such as flow time, time of setting, compressive strength, and permeability for a candidate grout mixture should be criteria used in the formulation of a grout mixture. (b) Once quantitative levels of such parameters have been established, the hydraulic cement-based grout system has adequate latitude in its formulation to accommodate these needs. (c) While longevity in nonaggressive environments and compatibility with host rocks is known in general for such systems, data for specific mixtures under specific conditions must be developed. A Standard Practice for Selecting Mixture Proportions for Hydraulic Cement-Based Materials Systems for Repository Sealing is presented as an Appendix. (Author).
Author: Jay E. Rhoderick
Publisher:
ISBN:
Category : Grout (Mortar).
Languages : en
Pages : 32
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Get Book Here
Book Description
Portland cement grout identified as BCT-1-FF (Bell Canyon Test 1-FF) was used in borehole plugging experiments of the Bell Canyon Tests in Holl AEC-7 at the Waste Isolation Pilot Plant site in New Mexico during September 1979 and February 1980. This grout was made with fresh water. A study of this grout was begun in August 1979 in the laboratory to evauate the possible effects of temperature, pressure, and storage in fresh water or simulated groundwater (brine) on its phase composition and compressive strength at early ages. Phase composition was determined by X-ray diffraction. Temperatures ranged up to about 150°F and included elevation at a few hours age after mixing; pressure was as high as 1500 psi; specimens were stored in simulated groundwater (brine) or in fresh water. Data from 1 to 90 days showed: (a) Higher temperature accelerated early strength gain. These differences essentially vanished by 90 days age. (b) Hydration products as identified by X-ray diffraction were normal; this indicated that a temperature range of 78 to 153°F was not significant. (c) Pressure did not affect composition. (d) Storage in simulated groundwater (brine) or fresh water had no detectable effect. (e) Since the BCT-1-FF grout mixture contained added sulfate, it formed more ettringite as judged by X-ray diffraction than comparable portland cement mixtures without added sulfate.
Author:
Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 716
Get Book Here
Book Description
Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.
