Author: Zhenyu Xiao
Publisher: CRC Press
ISBN: 9781003366362
Category : Technology & Engineering
Languages : en
Pages : 0
Book Description
"This book investigates the most advanced theories and methodologies of array beamforming, with a focus on antenna array enabled wireless communication technology. Combining with current development needs and trends of wireless communication technology around the world, the authors explore the potentials and challenges of large-scale antenna array beamforming technology in next-generation mobile communication and some important emerging application scenarios. The book first introduces the basic structure of antenna array hierarchical codebook and channel estimation with high dimensionality, with which the time cost of searching the channel information can be effectively reduced. It then explicates high-efficiency beamforming transmission methods for point-to-point transmission, full-duplex point-to-point transmission, and point-to-multipoint transmission where array beamforming enabled non-orthogonal multiple access (NOMA) technologies for typical two-user system and general multi-user system are emphasized. The title also discusses array beamforming enabled unmanned aerial vehicle (UAV) communications and array beamforming enabled space/air/ground communications, with the uniqueness and relative solutions for single UAV system and multi-UAV network analyzed. This will be a vital reference for researchers, students and professionals interested in wireless communications, array beamforming, and millimeter-wave communications"--
Array Beamforming Enabled Wireless Communications
Author: Zhenyu Xiao
Publisher: CRC Press
ISBN: 9781003366362
Category : Technology & Engineering
Languages : en
Pages : 0
Book Description
"This book investigates the most advanced theories and methodologies of array beamforming, with a focus on antenna array enabled wireless communication technology. Combining with current development needs and trends of wireless communication technology around the world, the authors explore the potentials and challenges of large-scale antenna array beamforming technology in next-generation mobile communication and some important emerging application scenarios. The book first introduces the basic structure of antenna array hierarchical codebook and channel estimation with high dimensionality, with which the time cost of searching the channel information can be effectively reduced. It then explicates high-efficiency beamforming transmission methods for point-to-point transmission, full-duplex point-to-point transmission, and point-to-multipoint transmission where array beamforming enabled non-orthogonal multiple access (NOMA) technologies for typical two-user system and general multi-user system are emphasized. The title also discusses array beamforming enabled unmanned aerial vehicle (UAV) communications and array beamforming enabled space/air/ground communications, with the uniqueness and relative solutions for single UAV system and multi-UAV network analyzed. This will be a vital reference for researchers, students and professionals interested in wireless communications, array beamforming, and millimeter-wave communications"--
Publisher: CRC Press
ISBN: 9781003366362
Category : Technology & Engineering
Languages : en
Pages : 0
Book Description
"This book investigates the most advanced theories and methodologies of array beamforming, with a focus on antenna array enabled wireless communication technology. Combining with current development needs and trends of wireless communication technology around the world, the authors explore the potentials and challenges of large-scale antenna array beamforming technology in next-generation mobile communication and some important emerging application scenarios. The book first introduces the basic structure of antenna array hierarchical codebook and channel estimation with high dimensionality, with which the time cost of searching the channel information can be effectively reduced. It then explicates high-efficiency beamforming transmission methods for point-to-point transmission, full-duplex point-to-point transmission, and point-to-multipoint transmission where array beamforming enabled non-orthogonal multiple access (NOMA) technologies for typical two-user system and general multi-user system are emphasized. The title also discusses array beamforming enabled unmanned aerial vehicle (UAV) communications and array beamforming enabled space/air/ground communications, with the uniqueness and relative solutions for single UAV system and multi-UAV network analyzed. This will be a vital reference for researchers, students and professionals interested in wireless communications, array beamforming, and millimeter-wave communications"--
Array Beamforming Enabled Wireless Communications
Author: Zhenyu Xiao
Publisher: CRC Press
ISBN: 1000837351
Category : Technology & Engineering
Languages : en
Pages : 464
Book Description
This book investigates the most advanced theories and methodologies of array beamforming, with a focus on antenna array enabled wireless communication technology. Combining with the current development needs and trends of wireless communication technology around the world, the authors explore the potentials and challenges of large-scale antenna array beamforming technology in next-generation mobile communication and some important emerging application scenarios. The book first introduces the basic structure of antenna array hierarchical codebook and channel estimation with high dimensionality, with which the time cost of searching the channel information can be effectively reduced. It then explicates high-efficiency beamforming transmission methods for point-to-point transmission, full-duplex point-to-point transmission, and point-to-multipoint transmission where array beamforming enabled non-orthogonal multiple access (NOMA) technologies for typical two-user systems and general multi-user systems are emphasized. The book also discusses array beamforming enabled unmanned aerial vehicle (UAV) communications and array beamforming enabled space/air/ground communications, with the uniqueness and relative solutions for single UAV systems and multi-UAV networks being analyzed. This will be a vital reference for researchers, students, and professionals interested in wireless communications, array beamforming, and millimeter-wave communications.
Publisher: CRC Press
ISBN: 1000837351
Category : Technology & Engineering
Languages : en
Pages : 464
Book Description
This book investigates the most advanced theories and methodologies of array beamforming, with a focus on antenna array enabled wireless communication technology. Combining with the current development needs and trends of wireless communication technology around the world, the authors explore the potentials and challenges of large-scale antenna array beamforming technology in next-generation mobile communication and some important emerging application scenarios. The book first introduces the basic structure of antenna array hierarchical codebook and channel estimation with high dimensionality, with which the time cost of searching the channel information can be effectively reduced. It then explicates high-efficiency beamforming transmission methods for point-to-point transmission, full-duplex point-to-point transmission, and point-to-multipoint transmission where array beamforming enabled non-orthogonal multiple access (NOMA) technologies for typical two-user systems and general multi-user systems are emphasized. The book also discusses array beamforming enabled unmanned aerial vehicle (UAV) communications and array beamforming enabled space/air/ground communications, with the uniqueness and relative solutions for single UAV systems and multi-UAV networks being analyzed. This will be a vital reference for researchers, students, and professionals interested in wireless communications, array beamforming, and millimeter-wave communications.
802.11ac: A Survival Guide
Author: Matthew S. Gast
Publisher: "O'Reilly Media, Inc."
ISBN: 1449357725
Category : Computers
Languages : en
Pages : 176
Book Description
The next frontier for wireless LANs is 802.11ac, a standard that increases throughput beyond one gigabit per second. This concise guide provides in-depth information to help you plan for 802.11ac, with technical details on design, network operations, deployment, and monitoring. Author Matthew Gast—an industry expert who led the development of 802.11-2012 and security task groups at the Wi-Fi Alliance—explains how 802.11ac will not only increase the speed of your network, but its capacity as well. Whether you need to serve more clients with your current level of throughput, or serve your existing client load with higher throughput, 802.11ac is the solution. This book gets you started. Understand how the 802.11ac protocol works to improve the speed and capacity of a wireless LAN Explore how beamforming increases speed capacity by improving link margin, and lays the foundation for multi-user MIMO Learn how multi-user MIMO increases capacity by enabling an AP to send data to multiple clients simultaneously Plan when and how to upgrade your network to 802.11ac by evaluating client devices, applications, and network connections
Publisher: "O'Reilly Media, Inc."
ISBN: 1449357725
Category : Computers
Languages : en
Pages : 176
Book Description
The next frontier for wireless LANs is 802.11ac, a standard that increases throughput beyond one gigabit per second. This concise guide provides in-depth information to help you plan for 802.11ac, with technical details on design, network operations, deployment, and monitoring. Author Matthew Gast—an industry expert who led the development of 802.11-2012 and security task groups at the Wi-Fi Alliance—explains how 802.11ac will not only increase the speed of your network, but its capacity as well. Whether you need to serve more clients with your current level of throughput, or serve your existing client load with higher throughput, 802.11ac is the solution. This book gets you started. Understand how the 802.11ac protocol works to improve the speed and capacity of a wireless LAN Explore how beamforming increases speed capacity by improving link margin, and lays the foundation for multi-user MIMO Learn how multi-user MIMO increases capacity by enabling an AP to send data to multiple clients simultaneously Plan when and how to upgrade your network to 802.11ac by evaluating client devices, applications, and network connections
Massive MIMO
Author: Hien Quoc Ngo
Publisher: Linköping University Electronic Press
ISBN: 9175191474
Category :
Languages : en
Pages : 69
Book Description
The last ten years have seen a massive growth in the number of connected wireless devices. Billions of devices are connected and managed by wireless networks. At the same time, each device needs a high throughput to support applications such as voice, real-time video, movies, and games. Demands for wireless throughput and the number of wireless devices will always increase. In addition, there is a growing concern about energy consumption of wireless communication systems. Thus, future wireless systems have to satisfy three main requirements: i) having a high throughput; ii) simultaneously serving many users; and iii) having less energy consumption. Massive multiple-input multiple-output (MIMO) technology, where a base station (BS) equipped with very large number of antennas (collocated or distributed) serves many users in the same time-frequency resource, can meet the above requirements, and hence, it is a promising candidate technology for next generations of wireless systems. With massive antenna arrays at the BS, for most propagation environments, the channels become favorable, i.e., the channel vectors between the users and the BS are (nearly) pairwisely orthogonal, and hence, linear processing is nearly optimal. A huge throughput and energy efficiency can be achieved due to the multiplexing gain and the array gain. In particular, with a simple power control scheme, Massive MIMO can offer uniformly good service for all users. In this dissertation, we focus on the performance of Massive MIMO. The dissertation consists of two main parts: fundamentals and system designs of Massive MIMO. In the first part, we focus on fundamental limits of the system performance under practical constraints such as low complexity processing, limited length of each coherence interval, intercell interference, and finite-dimensional channels. We first study the potential for power savings of the Massive MIMO uplink with maximum-ratio combining (MRC), zero-forcing, and minimum mean-square error receivers, under perfect and imperfect channels. The energy and spectral efficiency tradeoff is investigated. Secondly, we consider a physical channel model where the angular domain is divided into a finite number of distinct directions. A lower bound on the capacity is derived, and the effect of pilot contamination in this finite-dimensional channel model is analyzed. Finally, some aspects of favorable propagation in Massive MIMO under Rayleigh fading and line-of-sight (LoS) channels are investigated. We show that both Rayleigh fading and LoS environments offer favorable propagation. In the second part, based on the fundamental analysis in the first part, we propose some system designs for Massive MIMO. The acquisition of channel state information (CSI) is very importantin Massive MIMO. Typically, the channels are estimated at the BS through uplink training. Owing to the limited length of the coherence interval, the system performance is limited by pilot contamination. To reduce the pilot contamination effect, we propose an eigenvalue-decomposition-based scheme to estimate the channel directly from the received data. The proposed scheme results in better performance compared with the conventional training schemes due to the reduced pilot contamination. Another important issue of CSI acquisition in Massive MIMO is how to acquire CSI at the users. To address this issue, we propose two channel estimation schemes at the users: i) a downlink "beamforming training" scheme, and ii) a method for blind estimation of the effective downlink channel gains. In both schemes, the channel estimation overhead is independent of the number of BS antennas. We also derive the optimal pilot and data powers as well as the training duration allocation to maximize the sum spectral efficiency of the Massive MIMO uplink with MRC receivers, for a given total energy budget spent in a coherence interval. Finally, applications of Massive MIMO in relay channels are proposed and analyzed. Specifically, we consider multipair relaying systems where many sources simultaneously communicate with many destinations in the same time-frequency resource with the help of a massive MIMO relay. A massive MIMO relay is equipped with many collocated or distributed antennas. We consider different duplexing modes (full-duplex and half-duplex) and different relaying protocols (amplify-and-forward, decode-and-forward, two-way relaying, and one-way relaying) at the relay. The potential benefits of massive MIMO technology in these relaying systems are explored in terms of spectral efficiency and power efficiency.
Publisher: Linköping University Electronic Press
ISBN: 9175191474
Category :
Languages : en
Pages : 69
Book Description
The last ten years have seen a massive growth in the number of connected wireless devices. Billions of devices are connected and managed by wireless networks. At the same time, each device needs a high throughput to support applications such as voice, real-time video, movies, and games. Demands for wireless throughput and the number of wireless devices will always increase. In addition, there is a growing concern about energy consumption of wireless communication systems. Thus, future wireless systems have to satisfy three main requirements: i) having a high throughput; ii) simultaneously serving many users; and iii) having less energy consumption. Massive multiple-input multiple-output (MIMO) technology, where a base station (BS) equipped with very large number of antennas (collocated or distributed) serves many users in the same time-frequency resource, can meet the above requirements, and hence, it is a promising candidate technology for next generations of wireless systems. With massive antenna arrays at the BS, for most propagation environments, the channels become favorable, i.e., the channel vectors between the users and the BS are (nearly) pairwisely orthogonal, and hence, linear processing is nearly optimal. A huge throughput and energy efficiency can be achieved due to the multiplexing gain and the array gain. In particular, with a simple power control scheme, Massive MIMO can offer uniformly good service for all users. In this dissertation, we focus on the performance of Massive MIMO. The dissertation consists of two main parts: fundamentals and system designs of Massive MIMO. In the first part, we focus on fundamental limits of the system performance under practical constraints such as low complexity processing, limited length of each coherence interval, intercell interference, and finite-dimensional channels. We first study the potential for power savings of the Massive MIMO uplink with maximum-ratio combining (MRC), zero-forcing, and minimum mean-square error receivers, under perfect and imperfect channels. The energy and spectral efficiency tradeoff is investigated. Secondly, we consider a physical channel model where the angular domain is divided into a finite number of distinct directions. A lower bound on the capacity is derived, and the effect of pilot contamination in this finite-dimensional channel model is analyzed. Finally, some aspects of favorable propagation in Massive MIMO under Rayleigh fading and line-of-sight (LoS) channels are investigated. We show that both Rayleigh fading and LoS environments offer favorable propagation. In the second part, based on the fundamental analysis in the first part, we propose some system designs for Massive MIMO. The acquisition of channel state information (CSI) is very importantin Massive MIMO. Typically, the channels are estimated at the BS through uplink training. Owing to the limited length of the coherence interval, the system performance is limited by pilot contamination. To reduce the pilot contamination effect, we propose an eigenvalue-decomposition-based scheme to estimate the channel directly from the received data. The proposed scheme results in better performance compared with the conventional training schemes due to the reduced pilot contamination. Another important issue of CSI acquisition in Massive MIMO is how to acquire CSI at the users. To address this issue, we propose two channel estimation schemes at the users: i) a downlink "beamforming training" scheme, and ii) a method for blind estimation of the effective downlink channel gains. In both schemes, the channel estimation overhead is independent of the number of BS antennas. We also derive the optimal pilot and data powers as well as the training duration allocation to maximize the sum spectral efficiency of the Massive MIMO uplink with MRC receivers, for a given total energy budget spent in a coherence interval. Finally, applications of Massive MIMO in relay channels are proposed and analyzed. Specifically, we consider multipair relaying systems where many sources simultaneously communicate with many destinations in the same time-frequency resource with the help of a massive MIMO relay. A massive MIMO relay is equipped with many collocated or distributed antennas. We consider different duplexing modes (full-duplex and half-duplex) and different relaying protocols (amplify-and-forward, decode-and-forward, two-way relaying, and one-way relaying) at the relay. The potential benefits of massive MIMO technology in these relaying systems are explored in terms of spectral efficiency and power efficiency.
Fundamentals of Wireless Communication
Author: David Tse
Publisher: Cambridge University Press
ISBN: 9780521845274
Category : Computers
Languages : en
Pages : 598
Book Description
This textbook takes a unified view of the fundamentals of wireless communication and explains cutting-edge concepts in a simple and intuitive way. An abundant supply of exercises make it ideal for graduate courses in electrical and computer engineering and it will also be of great interest to practising engineers.
Publisher: Cambridge University Press
ISBN: 9780521845274
Category : Computers
Languages : en
Pages : 598
Book Description
This textbook takes a unified view of the fundamentals of wireless communication and explains cutting-edge concepts in a simple and intuitive way. An abundant supply of exercises make it ideal for graduate courses in electrical and computer engineering and it will also be of great interest to practising engineers.
Next Generation Wireless Communication
Author: Mohammed El Ghzaoui
Publisher: Springer Nature
ISBN: 3031561449
Category : Electronic books
Languages : en
Pages : 668
Book Description
Publisher: Springer Nature
ISBN: 3031561449
Category : Electronic books
Languages : en
Pages : 668
Book Description
Multifunctional Antennas and Arrays for Wireless Communication Systems
Author: Satish K. Sharma
Publisher: John Wiley & Sons
ISBN: 1119535050
Category : Technology & Engineering
Languages : en
Pages : 466
Book Description
MULTIFUNCTIONAL ANTENNAS AND ARRAYS FOR WIRELESS COMMUNICATION SYSTEMS Offers an up-to-date discussion of multifunctional antennas and arrays for wireless communication systems Multifunctional Antennas and Arrays for Wireless Communication Systems is a comprehensive reference on state-of-the-art reconfigurable antennas and 4G/5G communication antennas. The book gives a unique perspective while giving a comprehensive overview of the following topics: Frequency reconfigurable antennas Pattern reconfigurable antennas Polarization reconfigurable antennas Reconfigurable antennas using Liquid Metal, Piezoelectric, and RF MEMS MIMO and 4G/5G wireless communication antennas Metamaterials and metasurfaces in reconfigurable antennas Multifunctional antennas for user equipments (UEs) Defense related antennas and applications Flat panel phased array antennas The book is a valuable resource for the practicing engineer as well as for those within the research field. As wireless communications continuously evolves, more and more functionally will be required, and thus multifunctional antennas and RF systems will be necessary. These multifunctional antennas will require a degree of reconfigurability, and this book discusses various methods which enable this. The main topics of frequency, pattern, and polarization reconfigurability is first discussed. Methods utilizing unique materials and devices, both real and artificial are discussed. The book also delves into 4G/5G antennas as it relates to MIMO, and millimeter-wave phased arrays. Finally, there is a section on defense related multifunctional RF antenna systems.
Publisher: John Wiley & Sons
ISBN: 1119535050
Category : Technology & Engineering
Languages : en
Pages : 466
Book Description
MULTIFUNCTIONAL ANTENNAS AND ARRAYS FOR WIRELESS COMMUNICATION SYSTEMS Offers an up-to-date discussion of multifunctional antennas and arrays for wireless communication systems Multifunctional Antennas and Arrays for Wireless Communication Systems is a comprehensive reference on state-of-the-art reconfigurable antennas and 4G/5G communication antennas. The book gives a unique perspective while giving a comprehensive overview of the following topics: Frequency reconfigurable antennas Pattern reconfigurable antennas Polarization reconfigurable antennas Reconfigurable antennas using Liquid Metal, Piezoelectric, and RF MEMS MIMO and 4G/5G wireless communication antennas Metamaterials and metasurfaces in reconfigurable antennas Multifunctional antennas for user equipments (UEs) Defense related antennas and applications Flat panel phased array antennas The book is a valuable resource for the practicing engineer as well as for those within the research field. As wireless communications continuously evolves, more and more functionally will be required, and thus multifunctional antennas and RF systems will be necessary. These multifunctional antennas will require a degree of reconfigurability, and this book discusses various methods which enable this. The main topics of frequency, pattern, and polarization reconfigurability is first discussed. Methods utilizing unique materials and devices, both real and artificial are discussed. The book also delves into 4G/5G antennas as it relates to MIMO, and millimeter-wave phased arrays. Finally, there is a section on defense related multifunctional RF antenna systems.
Essentials of RF Front-end Design and Testing
Author: Ibrahim A. Haroun
Publisher: John Wiley & Sons
ISBN: 1394210612
Category : Technology & Engineering
Languages : en
Pages : 292
Book Description
Essentials of RF Front-end Design and Testing Highly comprehensive text delivering the RF system essentials required to understand, develop, and evaluate the performance of RF wireless systems Essentials of RF Front-end Design and Testing: A Practical Guide for Wireless Systems is a system-oriented book which provides several wireless communication disciplines in one volume. The book covers a wide range of topics, including antenna fundamentals, phased array antenna and MIMOs that are crucial for the latest 5G mmWave and future 6G wireless systems, high-frequency transmission lines, RF building blocks that are necessary to understand how various RF subsystems are interrelated and implemented in wireless systems, and test setups for conducted and Over-The-Air (OTA) transmitter and receiver tests. The text enables readers to understand, develop, and evaluate the performance of RF wireless systems. The text focuses on RF system performance and testing rather than mathematical proofs, which are available in the provided references. Although the book is intended for testing and building RF system prototypes, it has the sufficient theoretical background needed for RF systems design and testing. Each chapter includes learning objectives, review questions, and references. Sample topics covered in the book include: An overview of cellular phone systems, 5G NR wireless technology, MIMO technology, terahertz communications for 6G wireless technology, and modulation and multiplexing Analog and digital modulation techniques, including AM, SSB, FM, FSK, PSK, QAM, SSFH, DSSS, and OFDM High-frequency transmission lines, S-parameters, low-noise amplifier, RF mixers, filters, power amplifiers, frequency synthesizers, circulators/isolators, directional couplers, RF switches, and RF phase shifters Antenna basics, including antenna gain, radiation pattern, input impedance, polarization, and antenna noise temperature; microstrip antenna, antenna array, propagation path loss, compact antenna test range (CATR), and test setups for antenna measurements. Basics of MIMO and beamforming technology, including analog, digital, and hybrid beamforming Test setups for characterizing the key RF performance parameters of 5G New Radio base station transmitters and receivers. Essentials of RF Front-end Design and Testing: A Practical Guide for Wireless Systems is a highly comprehensive resource on the subject and is intended for graduate engineers and technologists involved in designing, developing, and testing wireless systems, along with undergraduate/graduate students, enhancing their learning experience of RF subsystems/systems characterization.
Publisher: John Wiley & Sons
ISBN: 1394210612
Category : Technology & Engineering
Languages : en
Pages : 292
Book Description
Essentials of RF Front-end Design and Testing Highly comprehensive text delivering the RF system essentials required to understand, develop, and evaluate the performance of RF wireless systems Essentials of RF Front-end Design and Testing: A Practical Guide for Wireless Systems is a system-oriented book which provides several wireless communication disciplines in one volume. The book covers a wide range of topics, including antenna fundamentals, phased array antenna and MIMOs that are crucial for the latest 5G mmWave and future 6G wireless systems, high-frequency transmission lines, RF building blocks that are necessary to understand how various RF subsystems are interrelated and implemented in wireless systems, and test setups for conducted and Over-The-Air (OTA) transmitter and receiver tests. The text enables readers to understand, develop, and evaluate the performance of RF wireless systems. The text focuses on RF system performance and testing rather than mathematical proofs, which are available in the provided references. Although the book is intended for testing and building RF system prototypes, it has the sufficient theoretical background needed for RF systems design and testing. Each chapter includes learning objectives, review questions, and references. Sample topics covered in the book include: An overview of cellular phone systems, 5G NR wireless technology, MIMO technology, terahertz communications for 6G wireless technology, and modulation and multiplexing Analog and digital modulation techniques, including AM, SSB, FM, FSK, PSK, QAM, SSFH, DSSS, and OFDM High-frequency transmission lines, S-parameters, low-noise amplifier, RF mixers, filters, power amplifiers, frequency synthesizers, circulators/isolators, directional couplers, RF switches, and RF phase shifters Antenna basics, including antenna gain, radiation pattern, input impedance, polarization, and antenna noise temperature; microstrip antenna, antenna array, propagation path loss, compact antenna test range (CATR), and test setups for antenna measurements. Basics of MIMO and beamforming technology, including analog, digital, and hybrid beamforming Test setups for characterizing the key RF performance parameters of 5G New Radio base station transmitters and receivers. Essentials of RF Front-end Design and Testing: A Practical Guide for Wireless Systems is a highly comprehensive resource on the subject and is intended for graduate engineers and technologists involved in designing, developing, and testing wireless systems, along with undergraduate/graduate students, enhancing their learning experience of RF subsystems/systems characterization.
Multifunctional Antennas and Arrays for Wireless Communication Systems
Author: Satish K. Sharma
Publisher: John Wiley & Sons
ISBN: 1119534976
Category : Technology & Engineering
Languages : en
Pages : 464
Book Description
MULTIFUNCTIONAL ANTENNAS AND ARRAYS FOR WIRELESS COMMUNICATION SYSTEMS Offers an up-to-date discussion of multifunctional antennas and arrays for wireless communication systems Multifunctional Antennas and Arrays for Wireless Communication Systems is a comprehensive reference on state-of-the-art reconfigurable antennas and 4G/5G communication antennas. The book gives a unique perspective while giving a comprehensive overview of the following topics: Frequency reconfigurable antennas Pattern reconfigurable antennas Polarization reconfigurable antennas Reconfigurable antennas using Liquid Metal, Piezoelectric, and RF MEMS MIMO and 4G/5G wireless communication antennas Metamaterials and metasurfaces in reconfigurable antennas Multifunctional antennas for user equipments (UEs) Defense related antennas and applications Flat panel phased array antennas The book is a valuable resource for the practicing engineer as well as for those within the research field. As wireless communications continuously evolves, more and more functionally will be required, and thus multifunctional antennas and RF systems will be necessary. These multifunctional antennas will require a degree of reconfigurability, and this book discusses various methods which enable this. The main topics of frequency, pattern, and polarization reconfigurability is first discussed. Methods utilizing unique materials and devices, both real and artificial are discussed. The book also delves into 4G/5G antennas as it relates to MIMO, and millimeter-wave phased arrays. Finally, there is a section on defense related multifunctional RF antenna systems.
Publisher: John Wiley & Sons
ISBN: 1119534976
Category : Technology & Engineering
Languages : en
Pages : 464
Book Description
MULTIFUNCTIONAL ANTENNAS AND ARRAYS FOR WIRELESS COMMUNICATION SYSTEMS Offers an up-to-date discussion of multifunctional antennas and arrays for wireless communication systems Multifunctional Antennas and Arrays for Wireless Communication Systems is a comprehensive reference on state-of-the-art reconfigurable antennas and 4G/5G communication antennas. The book gives a unique perspective while giving a comprehensive overview of the following topics: Frequency reconfigurable antennas Pattern reconfigurable antennas Polarization reconfigurable antennas Reconfigurable antennas using Liquid Metal, Piezoelectric, and RF MEMS MIMO and 4G/5G wireless communication antennas Metamaterials and metasurfaces in reconfigurable antennas Multifunctional antennas for user equipments (UEs) Defense related antennas and applications Flat panel phased array antennas The book is a valuable resource for the practicing engineer as well as for those within the research field. As wireless communications continuously evolves, more and more functionally will be required, and thus multifunctional antennas and RF systems will be necessary. These multifunctional antennas will require a degree of reconfigurability, and this book discusses various methods which enable this. The main topics of frequency, pattern, and polarization reconfigurability is first discussed. Methods utilizing unique materials and devices, both real and artificial are discussed. The book also delves into 4G/5G antennas as it relates to MIMO, and millimeter-wave phased arrays. Finally, there is a section on defense related multifunctional RF antenna systems.
5G and Beyond Wireless Systems
Author: Manish Mandloi
Publisher: Springer Nature
ISBN: 981156390X
Category : Technology & Engineering
Languages : en
Pages : 425
Book Description
This book presents the fundamental concepts, recent advancements, and opportunities for future research in various key enabling technologies in next-generation wireless communications. The book serves as a comprehensive source of information in all areas of wireless communications with a particular emphasis on physical (PHY) layer techniques related to 5G wireless systems and beyond. In particular, this book focuses on different emerging techniques that can be adopted in 5G wireless networks. Some of those techniques include massive-MIMO, mm-Wave communications, spectrum sharing, device-to-device (D2D) and vehicular to anything (V2X) communications, radio-frequency (RF) based energy harvesting, and NOMA. Subsequent chapters cover the fundamentals and PHY layer design aspects of different techniques that can be useful for the readers to get familiar with the emerging technologies and their applications.
Publisher: Springer Nature
ISBN: 981156390X
Category : Technology & Engineering
Languages : en
Pages : 425
Book Description
This book presents the fundamental concepts, recent advancements, and opportunities for future research in various key enabling technologies in next-generation wireless communications. The book serves as a comprehensive source of information in all areas of wireless communications with a particular emphasis on physical (PHY) layer techniques related to 5G wireless systems and beyond. In particular, this book focuses on different emerging techniques that can be adopted in 5G wireless networks. Some of those techniques include massive-MIMO, mm-Wave communications, spectrum sharing, device-to-device (D2D) and vehicular to anything (V2X) communications, radio-frequency (RF) based energy harvesting, and NOMA. Subsequent chapters cover the fundamentals and PHY layer design aspects of different techniques that can be useful for the readers to get familiar with the emerging technologies and their applications.