Author: Pratima Bajpai
Publisher: Springer
ISBN: 981104130X
Category : Science
Languages : en
Pages : 106
Book Description
This book presents a state-of-the-art report on the treatment of pulp and paper industry effluents using anaerobic technology. It covers a comprehensive range of topics, including the basic reasons for anaerobic treatment, comparison between anaerobic and aerobic treatment, effluent types suitable for anaerobic treatment, design considerations for anaerobic treatment, anaerobic reactor configurations applied for treatment of pulp and paper industry effluents, present status of anaerobic treatment in pulp and paper industry, economic aspects, examples of full scale installations and future trends.
Anaerobic Technology in Pulp and Paper Industry
Author: Pratima Bajpai
Publisher: Springer
ISBN: 981104130X
Category : Science
Languages : en
Pages : 106
Book Description
This book presents a state-of-the-art report on the treatment of pulp and paper industry effluents using anaerobic technology. It covers a comprehensive range of topics, including the basic reasons for anaerobic treatment, comparison between anaerobic and aerobic treatment, effluent types suitable for anaerobic treatment, design considerations for anaerobic treatment, anaerobic reactor configurations applied for treatment of pulp and paper industry effluents, present status of anaerobic treatment in pulp and paper industry, economic aspects, examples of full scale installations and future trends.
Publisher: Springer
ISBN: 981104130X
Category : Science
Languages : en
Pages : 106
Book Description
This book presents a state-of-the-art report on the treatment of pulp and paper industry effluents using anaerobic technology. It covers a comprehensive range of topics, including the basic reasons for anaerobic treatment, comparison between anaerobic and aerobic treatment, effluent types suitable for anaerobic treatment, design considerations for anaerobic treatment, anaerobic reactor configurations applied for treatment of pulp and paper industry effluents, present status of anaerobic treatment in pulp and paper industry, economic aspects, examples of full scale installations and future trends.
Anaerobic digestion in the kraft pulp and paper industry
Author: Eva-Maria Ekstrand
Publisher: Linköping University Electronic Press
ISBN: 9176850633
Category :
Languages : sv
Pages : 63
Book Description
The pulp and paper industry is a large producer of wastewater and sludge, putting high pressure on waste treatment. In addition, more rigorous environmental legislation for pollution control and demands to increase the use of renewable energy have put further pressure on the pulp and paper industry’s waste treatment, where anaerobic digestion (AD) and the production of methane could pose a solution. Kraft pulping makes up 80% of the world production of virgin wood pulp, thus, the wastewaters from this sector represent a large unused potential for methane production. There are three main types of substrates available for AD at pulp and paper mills, the wastewaters, the primary sludge/fibre sludge, and the waste activated sludge. AD treatment of these streams has been associated with several challenges, such as the presence of inhibiting compounds or low degradability during AD. The aim of this thesis was to experimentally address these challenges and potentials, focusing on wastes from kraft mills. Methane potential batch tests showed that many wastewater streams still posed challenges to AD, but the alkaline elemental chlorine-free bleaching stream and the condensate effluents had good methane potentials. Further, the methane potential of kraft mill fibre sludge was high, and co-digestion of kraft mill fibre sludge and waste activated sludge was feasible in stirred tank reactors with sludge recirculation. By increasing the organic loading in a pilot-scale activated sludge facility and thereby lowering the sludge age, the degradability of the waste activated sludge was improved. The higher wastewater treatment capacity achieved by this method provides an opportunity for the mills to increase their pulp and paper production. Further, by dewatering the digestate after AD and returning the liquid to the activated sludge treatment, costs for nutrient supplementation can be reduced. In conclusion, the thesis shows that AD of wastes from the kraft pulp and paper industry was feasible and carried many benefits regarding the generation of methane as a renewable energy carrier, improved wastewater treatment and reduced costs. Different strategies on how AD may be implemented in the kraft pulp and paper industry were formulated and discussed. Produktionen av pappers- och massa genererar stora mängder avloppsvatten, vilket ställer höga krav på en effektiv vattenrening. Därtill har skärpta regler för utsläpp till vatten och luft tillsammans med en ökad efterfrågan på användning av förnyelsebar energi ytterligare ökat trycket på vattenreningen inom pappers-och massaindustrin, där anaerob nedbrytning med metanproduktion som följd skulle kunna utgöra en lösning. Produktionen av sulfatmassa (en kemiskt kokad pappersmassa) utgör 80% av den globala nyproduktionen av massa, vilket innebär att avloppsvatten från denna sektor representerar en stor outnyttjad potential för metanproduktion. Det finns huvudsakligen tre typer av substrat tillgängliga för rötning vid pappers- och massabruk, avloppsvatten, primärslam/fiberslam, och aktivt slam/överskottsslam. Flera utmaningar är kopplade till anaerob nedbrytning av dess strömmar, såsom förekomst av inhiberande ämnen eller låg nedbrytbarhet. Målet med avhandlingen var att bemöta dessa utmaningar, med ett särskilt fokus på behandling av avloppsströmmar från sulfatbruk. Metanpotentialtester visade att många av avloppsvattnen fortfarande var svåra att behandla med anaerob nedbrytning, men att alkaliska blekeriströmmar och kondensatströmmar vid sulfatbruk visade lovande metanpotentialer. Massafiber från sulfatoch sulfitbruk uppvisade höga metanpotentialer, och en stabil kontinuerlig samrötning av fiberslam och aktivt slam från sulfatbruk uppnåddes vid hög organisk belastning och låg hydraulisk uppehållstid i omrörda tankreaktorer med slamåterföring. Resultaten visade vidare att den låga nedbrytbarheten hos aktivt slam kunde bemötas genom att sänka slamåldern i den luftade anläggningen, med högre metanpotential i slammet som följd. Via denna metodik erhålles en högre vattenreningskapacitet, vilket innebär att bruken kan öka sin produktion av papper och massa. Dessutom kan rötresten avvattnas och den kvarvarande vätskan återföras till den luftade anläggningen för att minska behovet av näringstillsatser. Sammanfattningsvis visar avhandlingen att anaerob nedbrytning av avloppsströmmar från sulfatbruk var fullt möjlig och innebar många fördelar, i form av metanproduktion, förbättrad kapacitet för vattenrening och reducerade kostnader jämfört med dagens teknik. Olika möjligheter för implementering av anaerob teknik vid sulfatbruk har också formulerats och diskuterats.
Publisher: Linköping University Electronic Press
ISBN: 9176850633
Category :
Languages : sv
Pages : 63
Book Description
The pulp and paper industry is a large producer of wastewater and sludge, putting high pressure on waste treatment. In addition, more rigorous environmental legislation for pollution control and demands to increase the use of renewable energy have put further pressure on the pulp and paper industry’s waste treatment, where anaerobic digestion (AD) and the production of methane could pose a solution. Kraft pulping makes up 80% of the world production of virgin wood pulp, thus, the wastewaters from this sector represent a large unused potential for methane production. There are three main types of substrates available for AD at pulp and paper mills, the wastewaters, the primary sludge/fibre sludge, and the waste activated sludge. AD treatment of these streams has been associated with several challenges, such as the presence of inhibiting compounds or low degradability during AD. The aim of this thesis was to experimentally address these challenges and potentials, focusing on wastes from kraft mills. Methane potential batch tests showed that many wastewater streams still posed challenges to AD, but the alkaline elemental chlorine-free bleaching stream and the condensate effluents had good methane potentials. Further, the methane potential of kraft mill fibre sludge was high, and co-digestion of kraft mill fibre sludge and waste activated sludge was feasible in stirred tank reactors with sludge recirculation. By increasing the organic loading in a pilot-scale activated sludge facility and thereby lowering the sludge age, the degradability of the waste activated sludge was improved. The higher wastewater treatment capacity achieved by this method provides an opportunity for the mills to increase their pulp and paper production. Further, by dewatering the digestate after AD and returning the liquid to the activated sludge treatment, costs for nutrient supplementation can be reduced. In conclusion, the thesis shows that AD of wastes from the kraft pulp and paper industry was feasible and carried many benefits regarding the generation of methane as a renewable energy carrier, improved wastewater treatment and reduced costs. Different strategies on how AD may be implemented in the kraft pulp and paper industry were formulated and discussed. Produktionen av pappers- och massa genererar stora mängder avloppsvatten, vilket ställer höga krav på en effektiv vattenrening. Därtill har skärpta regler för utsläpp till vatten och luft tillsammans med en ökad efterfrågan på användning av förnyelsebar energi ytterligare ökat trycket på vattenreningen inom pappers-och massaindustrin, där anaerob nedbrytning med metanproduktion som följd skulle kunna utgöra en lösning. Produktionen av sulfatmassa (en kemiskt kokad pappersmassa) utgör 80% av den globala nyproduktionen av massa, vilket innebär att avloppsvatten från denna sektor representerar en stor outnyttjad potential för metanproduktion. Det finns huvudsakligen tre typer av substrat tillgängliga för rötning vid pappers- och massabruk, avloppsvatten, primärslam/fiberslam, och aktivt slam/överskottsslam. Flera utmaningar är kopplade till anaerob nedbrytning av dess strömmar, såsom förekomst av inhiberande ämnen eller låg nedbrytbarhet. Målet med avhandlingen var att bemöta dessa utmaningar, med ett särskilt fokus på behandling av avloppsströmmar från sulfatbruk. Metanpotentialtester visade att många av avloppsvattnen fortfarande var svåra att behandla med anaerob nedbrytning, men att alkaliska blekeriströmmar och kondensatströmmar vid sulfatbruk visade lovande metanpotentialer. Massafiber från sulfatoch sulfitbruk uppvisade höga metanpotentialer, och en stabil kontinuerlig samrötning av fiberslam och aktivt slam från sulfatbruk uppnåddes vid hög organisk belastning och låg hydraulisk uppehållstid i omrörda tankreaktorer med slamåterföring. Resultaten visade vidare att den låga nedbrytbarheten hos aktivt slam kunde bemötas genom att sänka slamåldern i den luftade anläggningen, med högre metanpotential i slammet som följd. Via denna metodik erhålles en högre vattenreningskapacitet, vilket innebär att bruken kan öka sin produktion av papper och massa. Dessutom kan rötresten avvattnas och den kvarvarande vätskan återföras till den luftade anläggningen för att minska behovet av näringstillsatser. Sammanfattningsvis visar avhandlingen att anaerob nedbrytning av avloppsströmmar från sulfatbruk var fullt möjlig och innebar många fördelar, i form av metanproduktion, förbättrad kapacitet för vattenrening och reducerade kostnader jämfört med dagens teknik. Olika möjligheter för implementering av anaerob teknik vid sulfatbruk har också formulerats och diskuterats.
Pulp and Paper Industry
Author: Pratima Bajpai
Publisher: Elsevier
ISBN: 0128111003
Category : Technology & Engineering
Languages : en
Pages : 230
Book Description
Pulp and Paper Industry: Emerging Waste Water Treatment Technologies is the first book which comprehensively reviews this topic. Over the past decade, pulp and paper companies have continued to focus on minimizing fresh water use and effluent discharges as part of their move towards sustainable operating practices. Three stages—basic conservation, water reuse and water recycling—provide a systematic approach to water resource management. Implementing these stages requires increased financial investment and better utilization of water resources. The ultimate goal for pulp and paper companies is to have effluent-free factories with no negative environmental impact. The traditional water treatment technologies that are used in paper mills are not able to remove recalcitrant contaminants. Therefore, advanced water treatment technologies are being included in industrial wastewater treatment chains aiming to either improve water biodegradability or its final quality. This book discusses various measures being adopted by the pulp and paper industry to reduce water consumption and treatment techniques to treat wastewater to recover it for reuse. The book also examines the emerging technologies for treatment of effluents and presents examples of full-scale installations. - Provides thorough and in-depth coverage of advanced treatment technologies which will benefit the industry personnel, pulp manufacturers, researchers and advanced students - Presents new treatment strategies to improve water reuse and fulfill the legislation in force regarding wastewater discharge - Presents viable solutions for pulp and paper manufacturers in terms of wastewater treatment - Presents examples of full-scale installations to help motivate mill personnel to incorporate new technologies
Publisher: Elsevier
ISBN: 0128111003
Category : Technology & Engineering
Languages : en
Pages : 230
Book Description
Pulp and Paper Industry: Emerging Waste Water Treatment Technologies is the first book which comprehensively reviews this topic. Over the past decade, pulp and paper companies have continued to focus on minimizing fresh water use and effluent discharges as part of their move towards sustainable operating practices. Three stages—basic conservation, water reuse and water recycling—provide a systematic approach to water resource management. Implementing these stages requires increased financial investment and better utilization of water resources. The ultimate goal for pulp and paper companies is to have effluent-free factories with no negative environmental impact. The traditional water treatment technologies that are used in paper mills are not able to remove recalcitrant contaminants. Therefore, advanced water treatment technologies are being included in industrial wastewater treatment chains aiming to either improve water biodegradability or its final quality. This book discusses various measures being adopted by the pulp and paper industry to reduce water consumption and treatment techniques to treat wastewater to recover it for reuse. The book also examines the emerging technologies for treatment of effluents and presents examples of full-scale installations. - Provides thorough and in-depth coverage of advanced treatment technologies which will benefit the industry personnel, pulp manufacturers, researchers and advanced students - Presents new treatment strategies to improve water reuse and fulfill the legislation in force regarding wastewater discharge - Presents viable solutions for pulp and paper manufacturers in terms of wastewater treatment - Presents examples of full-scale installations to help motivate mill personnel to incorporate new technologies
Anaerobic digestion in the kraft pulp and paper industry
Author: Eva-Maria Ekstrand
Publisher: Linköping University Electronic Press
ISBN: 9176850633
Category :
Languages : en
Pages : 63
Book Description
The pulp and paper industry is a large producer of wastewater and sludge, putting high pressure on waste treatment. In addition, more rigorous environmental legislation for pollution control and demands to increase the use of renewable energy have put further pressure on the pulp and paper industry’s waste treatment, where anaerobic digestion (AD) and the production of methane could pose a solution. Kraft pulping makes up 80% of the world production of virgin wood pulp, thus, the wastewaters from this sector represent a large unused potential for methane production. There are three main types of substrates available for AD at pulp and paper mills, the wastewaters, the primary sludge/fibre sludge, and the waste activated sludge. AD treatment of these streams has been associated with several challenges, such as the presence of inhibiting compounds or low degradability during AD. The aim of this thesis was to experimentally address these challenges and potentials, focusing on wastes from kraft mills. Methane potential batch tests showed that many wastewater streams still posed challenges to AD, but the alkaline elemental chlorine-free bleaching stream and the condensate effluents had good methane potentials. Further, the methane potential of kraft mill fibre sludge was high, and co-digestion of kraft mill fibre sludge and waste activated sludge was feasible in stirred tank reactors with sludge recirculation. By increasing the organic loading in a pilot-scale activated sludge facility and thereby lowering the sludge age, the degradability of the waste activated sludge was improved. The higher wastewater treatment capacity achieved by this method provides an opportunity for the mills to increase their pulp and paper production. Further, by dewatering the digestate after AD and returning the liquid to the activated sludge treatment, costs for nutrient supplementation can be reduced. In conclusion, the thesis shows that AD of wastes from the kraft pulp and paper industry was feasible and carried many benefits regarding the generation of methane as a renewable energy carrier, improved wastewater treatment and reduced costs. Different strategies on how AD may be implemented in the kraft pulp and paper industry were formulated and discussed. Produktionen av pappers- och massa genererar stora mängder avloppsvatten, vilket ställer höga krav på en effektiv vattenrening. Därtill har skärpta regler för utsläpp till vatten och luft tillsammans med en ökad efterfrågan på användning av förnyelsebar energi ytterligare ökat trycket på vattenreningen inom pappers-och massaindustrin, där anaerob nedbrytning med metanproduktion som följd skulle kunna utgöra en lösning. Produktionen av sulfatmassa (en kemiskt kokad pappersmassa) utgör 80% av den globala nyproduktionen av massa, vilket innebär att avloppsvatten från denna sektor representerar en stor outnyttjad potential för metanproduktion. Det finns huvudsakligen tre typer av substrat tillgängliga för rötning vid pappers- och massabruk, avloppsvatten, primärslam/fiberslam, och aktivt slam/överskottsslam. Flera utmaningar är kopplade till anaerob nedbrytning av dess strömmar, såsom förekomst av inhiberande ämnen eller låg nedbrytbarhet. Målet med avhandlingen var att bemöta dessa utmaningar, med ett särskilt fokus på behandling av avloppsströmmar från sulfatbruk. Metanpotentialtester visade att många av avloppsvattnen fortfarande var svåra att behandla med anaerob nedbrytning, men att alkaliska blekeriströmmar och kondensatströmmar vid sulfatbruk visade lovande metanpotentialer. Massafiber från sulfatoch sulfitbruk uppvisade höga metanpotentialer, och en stabil kontinuerlig samrötning av fiberslam och aktivt slam från sulfatbruk uppnåddes vid hög organisk belastning och låg hydraulisk uppehållstid i omrörda tankreaktorer med slamåterföring. Resultaten visade vidare att den låga nedbrytbarheten hos aktivt slam kunde bemötas genom att sänka slamåldern i den luftade anläggningen, med högre metanpotential i slammet som följd. Via denna metodik erhålles en högre vattenreningskapacitet, vilket innebär att bruken kan öka sin produktion av papper och massa. Dessutom kan rötresten avvattnas och den kvarvarande vätskan återföras till den luftade anläggningen för att minska behovet av näringstillsatser. Sammanfattningsvis visar avhandlingen att anaerob nedbrytning av avloppsströmmar från sulfatbruk var fullt möjlig och innebar många fördelar, i form av metanproduktion, förbättrad kapacitet för vattenrening och reducerade kostnader jämfört med dagens teknik. Olika möjligheter för implementering av anaerob teknik vid sulfatbruk har också formulerats och diskuterats.
Publisher: Linköping University Electronic Press
ISBN: 9176850633
Category :
Languages : en
Pages : 63
Book Description
The pulp and paper industry is a large producer of wastewater and sludge, putting high pressure on waste treatment. In addition, more rigorous environmental legislation for pollution control and demands to increase the use of renewable energy have put further pressure on the pulp and paper industry’s waste treatment, where anaerobic digestion (AD) and the production of methane could pose a solution. Kraft pulping makes up 80% of the world production of virgin wood pulp, thus, the wastewaters from this sector represent a large unused potential for methane production. There are three main types of substrates available for AD at pulp and paper mills, the wastewaters, the primary sludge/fibre sludge, and the waste activated sludge. AD treatment of these streams has been associated with several challenges, such as the presence of inhibiting compounds or low degradability during AD. The aim of this thesis was to experimentally address these challenges and potentials, focusing on wastes from kraft mills. Methane potential batch tests showed that many wastewater streams still posed challenges to AD, but the alkaline elemental chlorine-free bleaching stream and the condensate effluents had good methane potentials. Further, the methane potential of kraft mill fibre sludge was high, and co-digestion of kraft mill fibre sludge and waste activated sludge was feasible in stirred tank reactors with sludge recirculation. By increasing the organic loading in a pilot-scale activated sludge facility and thereby lowering the sludge age, the degradability of the waste activated sludge was improved. The higher wastewater treatment capacity achieved by this method provides an opportunity for the mills to increase their pulp and paper production. Further, by dewatering the digestate after AD and returning the liquid to the activated sludge treatment, costs for nutrient supplementation can be reduced. In conclusion, the thesis shows that AD of wastes from the kraft pulp and paper industry was feasible and carried many benefits regarding the generation of methane as a renewable energy carrier, improved wastewater treatment and reduced costs. Different strategies on how AD may be implemented in the kraft pulp and paper industry were formulated and discussed. Produktionen av pappers- och massa genererar stora mängder avloppsvatten, vilket ställer höga krav på en effektiv vattenrening. Därtill har skärpta regler för utsläpp till vatten och luft tillsammans med en ökad efterfrågan på användning av förnyelsebar energi ytterligare ökat trycket på vattenreningen inom pappers-och massaindustrin, där anaerob nedbrytning med metanproduktion som följd skulle kunna utgöra en lösning. Produktionen av sulfatmassa (en kemiskt kokad pappersmassa) utgör 80% av den globala nyproduktionen av massa, vilket innebär att avloppsvatten från denna sektor representerar en stor outnyttjad potential för metanproduktion. Det finns huvudsakligen tre typer av substrat tillgängliga för rötning vid pappers- och massabruk, avloppsvatten, primärslam/fiberslam, och aktivt slam/överskottsslam. Flera utmaningar är kopplade till anaerob nedbrytning av dess strömmar, såsom förekomst av inhiberande ämnen eller låg nedbrytbarhet. Målet med avhandlingen var att bemöta dessa utmaningar, med ett särskilt fokus på behandling av avloppsströmmar från sulfatbruk. Metanpotentialtester visade att många av avloppsvattnen fortfarande var svåra att behandla med anaerob nedbrytning, men att alkaliska blekeriströmmar och kondensatströmmar vid sulfatbruk visade lovande metanpotentialer. Massafiber från sulfatoch sulfitbruk uppvisade höga metanpotentialer, och en stabil kontinuerlig samrötning av fiberslam och aktivt slam från sulfatbruk uppnåddes vid hög organisk belastning och låg hydraulisk uppehållstid i omrörda tankreaktorer med slamåterföring. Resultaten visade vidare att den låga nedbrytbarheten hos aktivt slam kunde bemötas genom att sänka slamåldern i den luftade anläggningen, med högre metanpotential i slammet som följd. Via denna metodik erhålles en högre vattenreningskapacitet, vilket innebär att bruken kan öka sin produktion av papper och massa. Dessutom kan rötresten avvattnas och den kvarvarande vätskan återföras till den luftade anläggningen för att minska behovet av näringstillsatser. Sammanfattningsvis visar avhandlingen att anaerob nedbrytning av avloppsströmmar från sulfatbruk var fullt möjlig och innebar många fördelar, i form av metanproduktion, förbättrad kapacitet för vattenrening och reducerade kostnader jämfört med dagens teknik. Olika möjligheter för implementering av anaerob teknik vid sulfatbruk har också formulerats och diskuterats.
Selected Water Resources Abstracts
Author:
Publisher:
ISBN:
Category : Water
Languages : en
Pages : 962
Book Description
Publisher:
ISBN:
Category : Water
Languages : en
Pages : 962
Book Description
Biotechnology for Pulp and Paper Processing
Author: Pratima Bajpai
Publisher: Springer Science & Business Media
ISBN: 1461414091
Category : Science
Languages : en
Pages : 427
Book Description
This book provides the most up-to-date information available on various biotechnological processes useful in the pulp and paper industry. Each of the twenty chapters covers a specific biotechnological process or technique, discussing the advantages, limitations, and future prospects of the most important and popular processes used in the industry. Topics covered include tree improvement, pulping, bleaching, deinking, fiber modification, biosolids management, and biorefining.
Publisher: Springer Science & Business Media
ISBN: 1461414091
Category : Science
Languages : en
Pages : 427
Book Description
This book provides the most up-to-date information available on various biotechnological processes useful in the pulp and paper industry. Each of the twenty chapters covers a specific biotechnological process or technique, discussing the advantages, limitations, and future prospects of the most important and popular processes used in the industry. Topics covered include tree improvement, pulping, bleaching, deinking, fiber modification, biosolids management, and biorefining.
Advances in Biofuels and Bioenergy
Author: Madhugiri Nageswara-Rao
Publisher: BoD – Books on Demand
ISBN: 1789232864
Category : Technology & Engineering
Languages : en
Pages : 294
Book Description
The worldwide consumption of fossil fuel continues to increase at unsustainable levels, which will lead to progressive scarcity, if immediate and innovative measures are not taken for its sustainable use. This scarcity necessitates the development of renewable and sustainable alternatives for fossil fuels. A possible solution to today's energy challenges can be provided by biofuels. This book intends to provide the reader with a comprehensive overview of the current status and the future implications of biofuels. Diverse and aptly covered comprehensive information in this book will directly enhance both basic and applied research in biofuels and will particularly be useful for students, scientists, breeders, growers, ecologists, industrialists and policy makers. It will be a valuable reference point to improve biofuels in the areas of ecologically and economically sustainable bioenergy research.
Publisher: BoD – Books on Demand
ISBN: 1789232864
Category : Technology & Engineering
Languages : en
Pages : 294
Book Description
The worldwide consumption of fossil fuel continues to increase at unsustainable levels, which will lead to progressive scarcity, if immediate and innovative measures are not taken for its sustainable use. This scarcity necessitates the development of renewable and sustainable alternatives for fossil fuels. A possible solution to today's energy challenges can be provided by biofuels. This book intends to provide the reader with a comprehensive overview of the current status and the future implications of biofuels. Diverse and aptly covered comprehensive information in this book will directly enhance both basic and applied research in biofuels and will particularly be useful for students, scientists, breeders, growers, ecologists, industrialists and policy makers. It will be a valuable reference point to improve biofuels in the areas of ecologically and economically sustainable bioenergy research.
Green Chemistry and Sustainability in Pulp and Paper Industry
Author: Pratima Bajpai
Publisher: Springer
ISBN: 3319187449
Category : Science
Languages : en
Pages : 273
Book Description
This book features in-depth and thorough coverage of Minimum Impact Mill Technologies which can meet the environmental challenges of the pulp and paper industry and also discusses Mills and Fiberlines that encompass “State-of-the-Art” technology and management practices. The minimum impact mill does not mean "zero effluent", nor is it exclusive to one bleaching concept. It is a much bigger concept which means that significant progress must be made in the following areas: Water Management, Internal Chemical Management, Energy Management, Control and Discharge of Non-Process Elements and Removal of Hazardous Pollutants. At the moment, there is no bleached kraft pulp mill operating with zero effluent. With the rise in environmental awareness due to the lobbying by environmental organizations and with increased government regulation there is now a trend towards sustainability in the pulp and paper industry. Sustainable pulp and paper manufacturing requires a holistic view of the manufacturing process. During the last decade, there have been revolutionary technical developments in pulping, bleaching and chemical recovery technology. These developments have made it possible to further reduce loads in effluents and airborne emissions. Thus, there has been a strong progress towards minimum impact mills in the pulp and paper industry. The minimum-impact mill is a holistic manufacturing concept that encompasses environmental management systems, compliance with environmental laws and regulations and manufacturing technologies.
Publisher: Springer
ISBN: 3319187449
Category : Science
Languages : en
Pages : 273
Book Description
This book features in-depth and thorough coverage of Minimum Impact Mill Technologies which can meet the environmental challenges of the pulp and paper industry and also discusses Mills and Fiberlines that encompass “State-of-the-Art” technology and management practices. The minimum impact mill does not mean "zero effluent", nor is it exclusive to one bleaching concept. It is a much bigger concept which means that significant progress must be made in the following areas: Water Management, Internal Chemical Management, Energy Management, Control and Discharge of Non-Process Elements and Removal of Hazardous Pollutants. At the moment, there is no bleached kraft pulp mill operating with zero effluent. With the rise in environmental awareness due to the lobbying by environmental organizations and with increased government regulation there is now a trend towards sustainability in the pulp and paper industry. Sustainable pulp and paper manufacturing requires a holistic view of the manufacturing process. During the last decade, there have been revolutionary technical developments in pulping, bleaching and chemical recovery technology. These developments have made it possible to further reduce loads in effluents and airborne emissions. Thus, there has been a strong progress towards minimum impact mills in the pulp and paper industry. The minimum-impact mill is a holistic manufacturing concept that encompasses environmental management systems, compliance with environmental laws and regulations and manufacturing technologies.
Proceedings of the 44th Industrial Waste Conference May 1989, Purdue University
Author: John W. Bell
Publisher: CRC Press
ISBN: 135108447X
Category : Technology & Engineering
Languages : en
Pages : 964
Book Description
New research-case histories and operating data-on every conceivable facet of today's big problem are detailed in the latest Purdue Book-with unparalleled appropriate, usable information and data for your current industrial waste problems from the May 1989 Conference.
Publisher: CRC Press
ISBN: 135108447X
Category : Technology & Engineering
Languages : en
Pages : 964
Book Description
New research-case histories and operating data-on every conceivable facet of today's big problem are detailed in the latest Purdue Book-with unparalleled appropriate, usable information and data for your current industrial waste problems from the May 1989 Conference.
Forest Products Biotechnology
Author: Alan Bruce
Publisher: CRC Press
ISBN: 1040190820
Category : Science
Languages : en
Pages : 513
Book Description
Industries are developing radical, new biotechnology processes to expand and develop their range of products that originate from the world's forests. As a result of the growing understanding of the process involved, biotechnology is also helping reduce any adverse impact on the environment.; This book presents a review of specialist research direct
Publisher: CRC Press
ISBN: 1040190820
Category : Science
Languages : en
Pages : 513
Book Description
Industries are developing radical, new biotechnology processes to expand and develop their range of products that originate from the world's forests. As a result of the growing understanding of the process involved, biotechnology is also helping reduce any adverse impact on the environment.; This book presents a review of specialist research direct