Author: Alyosha C. MolnarPublisher:
ISBN:
Category :
Languages : en
Pages : 190
Book Description
An Ultra-low-power 900MHz Radio Transmitter for Wireless Sensor Networks
Author: Alyosha C. MolnarPublisher:
ISBN:
Category :
Languages : en
Pages : 190
Book Description
Ultra-low Power Radio Transceiver for Wireless Sensor Networks
Author: Chi Jeon HwangPublisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
The objective of this thesis is to present the design and implementation of ultra-low power radio transceivers at microwave frequencies, which are applicable to wireless sensor network (WSN) and, in particular, to the requirement of the Speckled Computing Consortium (or SpeckNet). This was achieved through quasi-MMIC prototypes and monolithic microwave integrated circuit (MMIC) with dc power consumption of less than 1mW and radio communication ranges operating at least one metre. A wireless sensor network is made up of widely distributed autonomous devices incorporating sensors to cooperatively monitor physical environments. There are different kinds of sensor network applications in which sensors perform a wide range of activities. Among these, a certain set of applications require that sensor nodes collect information about the physical environment. Each sensor node operates autonomously without a central node of control. However, there are many implementation challenges associated with sensor nodes. These nodes must consume extremely low power and must communicate with their neighbours at bit-rates in the order of hundreds of kilobits per second and potentially need to operate at high volumetric densities. Since the power constraint is the most challenging requirement, the radio transceiver must consume ultra-low power in order to prolong the limited battery capacity of a node. The radio transceiver must also be compact, less than 5?5 mm2, to achieve a target size for sensor node and operate over a range of at least one metre to allow communication between widely deployed nodes. Different transceiver topologies are discussed to choose the radio transceiver architecture with specifications that are required in this project. The conventional heterodyne and homodyne topologies are discussed to be unsuitable methods to achieve low power transceiver due to power hungry circuits and their high complexity. The super-regenerative transceiver is also discussed to be unsuitable method because it has a drawback of inherent frequency instability and its characteristics strongly depend on the performance of the super-regenerative oscillator. Instead, a more efficient method of modulation and demodulation such as on-off keying (OOK) is presented. Furthermore, design considerations are shown which can be used to achieve relatively large output voltages for small input powers using an OOK modulation system. This is important because transceiver does not require the use of additional circuits to increase gain or sensitivity and consequently it achieves lower power consumption in a sensor node. This thesis details the circuit design with both a commercial and in-house device technology with ultra-low dc power consumption while retaining adequate RF performance. It details the design of radio building blocks including amplifiers, oscillators, switches and detectors. Furthermore, the circuit integration is presented to achieve a compact transceiver and different circuit topologies to minimize dc power consumption are described. To achieve the sensitivity requirements of receiver, a detector design method with large output voltage is presented. The receiver is measured to have output voltages of 1mVp-p for input powers of -60dBm over a 1 metre operating range while consuming as much as 420?W. The first prototype combines all required blocks using an in-house GaAs MMIC process with commercial pseudomorphic high electron mobility transistor (PHEMT). The OOK radio transceiver successfully operates at the centre frequency of 10GHz for compact antenna and with ultra-low power consumption and shows an output power of -10.4dBm for the transmitter, an output voltage of 1mVp-p at an operating range of 1 metre for the receiver and a total power consumption of 840?W. Based on this prototype, an MMIC radio transceiver at the 24GHz band is also designed to further improve the performance and reduce the physical size with an advanced 50nm gate-length GaAs metamorphic high electron mobility transistor (MHEMT) device technology.
Ultra-Low-Power Short-Range Radios
Author: Patrick P. MercierPublisher: Springer
ISBN: 3319147145
Category : Technology & Engineering
Languages : en
Pages : 399
Book Description
This book explores the design of ultra-low-power radio-frequency integrated circuits (RFICs), with communication distances ranging from a few centimeters to a few meters. The authors describe leading-edge techniques to achieve ultra-low-power communication over short-range links. Many different applications are covered, ranging from body-area networks to transcutaneous implant communications and smart-appliance sensor networks. Various design techniques are explained to facilitate each of these applications.
Ultra-Low Power Wireless Technologies for Sensor Networks
Author: Brian OtisPublisher: Springer Science & Business Media
ISBN: 0387493131
Category : Technology & Engineering
Languages : en
Pages : 192
Book Description
This book is written for academic and professional researchers designing communication systems for pervasive and low power applications. There is an introduction to wireless sensor networks, but the main emphasis of the book is on design techniques for low power, highly integrated transceivers. Instead of presenting a single design perspective, this book presents the design philosophies from three diverse research groups, providing three completely different strategies for achieving similar goals. By presenting diverse perspectives, this book prepares the reader for the countless design decisions they will be making in their own designs.
Ultra-Low Power FM-UWB Transceivers for IoT
Author: Vladimir KoptaPublisher: CRC Press
ISBN: 1000794490
Category : Technology & Engineering
Languages : en
Pages : 224
Book Description
Over the past two decades we have witnessed the increasing popularity of the internet of things. The vision of billions of connected objects, able to interact with their environment, is the key driver directing the development of future communication devices. Today, power consumption as well as the cost and size of radios remain some of the key obstacles towards fulfilling this vision. Ultra-Low Power FM-UWB Transceivers for IoT presents the latest developments in the field of low power wireless communication. It promotes the FM-UWB modulation scheme as a candidate for short range communication in different IoT scenarios. The FM-UWB has the potential to provide exactly what is missing today. This spread spectrum technique enables significant reduction in transceiver complexity, making it smaller, cheaper and more energy efficient than most alternative options. The book provides an overview of both circuit-level and architectural techniques used in low power radio design, with a comprehensive study of state-of-the-art examples. It summarizes key theoretical aspects of FM-UWB with a glimpse at potential future research directions. Finally, it gives an insight into a full FM-UWB transceiver design, from system level specifications down to transistor level design, demonstrating the modern power reduction circuit techniques. Ultra-Low Power FM-UWB Transceivers for IoT is a perfect text and reference for engineers working in RF IC design and wireless communication, as well as academic staff and graduate students engaged in low power communication systems research.
Ultra Low Power Transmitters for Wireless Sensor Networks
Author: Yuen Hui CheePublisher:
ISBN:
Category :
Languages : en
Pages : 284
Book Description
Architectures and Synthesizers for Ultra-low Power Fast Frequency-Hopping WSN Radios
Author: Emanuele LopelliPublisher: Springer Science & Business Media
ISBN: 9400701837
Category : Technology & Engineering
Languages : en
Pages : 241
Book Description
Wireless sensor networks have the potential to become the third wireless revolution after wireless voice networks in the 80s and wireless data networks in the late 90s. Unfortunately, radio power consumption is still a major bottleneck to the wide adoption of this technology. Different directions have been explored to minimize the radio consumption, but the major drawback of the proposed solutions is a reduced wireless link robustness. The primary goal of Architectures and Synthesizers for Ultra-low Power Fast Frequency-Hopping WSN Radios is to discuss, in detail, existing and new architectural and circuit level solutions for ultra-low power, robust, uni-directional and bi-directional radio links. Architectures and Synthesizers for Ultra-low Power Fast Frequency-Hopping WSN Radios guides the reader through the many system, circuit and technology trade-offs he will be facing in the design of communication systems for wireless sensor networks. Finally, this book, through different examples realized in both advanced CMOS and bipolar technologies opens a new path in the radio design, showing how radio link robustness can be guaranteed by techniques that were previously exclusively used in radio systems for middle or high end applications like Bluetooth and military communications while still minimizing the overall system power consumption.
Wake-up Receiver Based Ultra-Low-Power WBAN
Author: Maarten LontPublisher: Springer
ISBN: 3319064509
Category : Technology & Engineering
Languages : en
Pages : 158
Book Description
This book presents the cross-layer design and optimization of wake-up receivers for wireless body area networks (WBAN), with an emphasis on low-power circuit design. This includes the analysis of medium access control (MAC) protocols, mixer-first receiver design, and implications of receiver impairments on wideband frequency-shift-keying (FSK) receivers. Readers will learn how the overall power consumption is reduced by exploiting the characteristics of body area networks. Theoretical models presented are validated with two different receiver implementations, in 90nm and 40nm CMOS technology.
Ultra Low Power FM-UWB Transceiver for High-Density Wireless Sensor Networks
Author: Vladimir KoptaPublisher:
ISBN:
Category :
Languages : en
Pages : 154
Book Description
Mots-clés de l'auteur: ultra-wideband ; low power ; wireless communication ; RF ; transceiver ; UWB ; frequency modulation ; FM-UWB ; FDMA ; WSN.
Ultra-low Power Receivers for Wireless Sensor Networks
Author: James S. AyersPublisher:
ISBN:
Category : Wireless sensor networks
Languages : en
Pages : 194
Book Description
In wireless sensor network applications, low-power operation of the wireless receiver is critical. To address this need an ultra-low power Binary Frequency Shift Keying (BFSK) receiver using the super-regenerative architecture is developed. A prototype receiver is built and tested for operation in the 900 MHz ISM band. Lab measurements show power consumption as low as 244 [mu]W with a sensitivity of -84 dBm while operating at 250 kbps. A second test chip designed to operate at 2.4 GHz improves on the previous design by adding full digital control and calibration. The 2.4 GHz receiver consumes 215 [mu]W while operating at 250 kbps and shows a 12 dB improvement in sensitivity over the original design. The entire receiver has an energy consumption of only 0.175 nJ/b while operating at 2 Mbps.
