American Engineer, Car Builder and Railroad Journal, 1897, Vol. 71 (Classic Reprint) PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download American Engineer, Car Builder and Railroad Journal, 1897, Vol. 71 (Classic Reprint) PDF full book. Access full book title American Engineer, Car Builder and Railroad Journal, 1897, Vol. 71 (Classic Reprint) by G. M. Basford. Download full books in PDF and EPUB format.
Author: G. M. Basford
Publisher: Forgotten Books
ISBN: 9780267904549
Category : Technology & Engineering
Languages : en
Pages : 444
Get Book Here
Book Description
Excerpt from American Engineer, Car Builder and Railroad Journal, 1897, Vol. 71 The iron which is intended for use in the shops is stored in racks or bins outside of the two ends of the building. Each of these bins is numbered and a card is assigned to each bin in which the iron received and that given out is entered. From this the amount on hand can be made out at any time, which should, of course, correspond with an inventory whenever it is taken. The cards are in charge of a person whose business it is to look after the stock of iron on hand, and they are stored in a case under lock and key in the engine-room. The truck shop, which has been described, is near the blacksmith shop. When the trucks are completed, they are run out on a track alongside of the smith shop to be oiled. By the repetition of this operation, on many trucks, much oil was spilled in the ground, which thus became saturated with it. It was therefore feared that it might take fire if a piece of hot iron or a light should accidentally be applied to it. To obviate this risk, a series of sheet iron pans have been located alongside of the tracks, into which the oil drips, and from which it is readily removed. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Author: G. M. Basford
Publisher: Forgotten Books
ISBN: 9780267904549
Category : Technology & Engineering
Languages : en
Pages : 444
Get Book Here
Book Description
Excerpt from American Engineer, Car Builder and Railroad Journal, 1897, Vol. 71 The iron which is intended for use in the shops is stored in racks or bins outside of the two ends of the building. Each of these bins is numbered and a card is assigned to each bin in which the iron received and that given out is entered. From this the amount on hand can be made out at any time, which should, of course, correspond with an inventory whenever it is taken. The cards are in charge of a person whose business it is to look after the stock of iron on hand, and they are stored in a case under lock and key in the engine-room. The truck shop, which has been described, is near the blacksmith shop. When the trucks are completed, they are run out on a track alongside of the smith shop to be oiled. By the repetition of this operation, on many trucks, much oil was spilled in the ground, which thus became saturated with it. It was therefore feared that it might take fire if a piece of hot iron or a light should accidentally be applied to it. To obviate this risk, a series of sheet iron pans have been located alongside of the tracks, into which the oil drips, and from which it is readily removed. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Author: M. N. Forney
Publisher: Forgotten Books
ISBN: 9780267722624
Category : Technology & Engineering
Languages : en
Pages : 278
Get Book Here
Book Description
Excerpt from American Engineer, Vol. 70: Car Builder and Railroad Journal; 1896 Link Motion for Ten-wheeled Locomotive Lithographs of M. C. B. Standards. Litigant, ' An' Extraordinary. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Author: G. M. Basford
Publisher:
ISBN: 9781332936243
Category : Technology & Engineering
Languages : en
Pages : 432
Get Book Here
Book Description
Author:
Publisher: Forgotten Books
ISBN: 9780267894147
Category : Technology & Engineering
Languages : en
Pages : 94
Get Book Here
Book Description
Excerpt from American Engineer, Car Builder and Railroad Journal, 1896 Mr. William Apps, formerly Master Car Builder of t Illinois Central, has been appointed General Master Car Builder of the Canadian Pacific at Montreal. He succeeds Mr. John Higginson, who recently resigned. Mr. Apps was formerly in charge of the car department of the Great Northern. He was afterward Master Car Builder of the Western of Alabama, and has also been with the Chicago Eastern Illinois, and the Illinois Central. On Jan. Let Mr. Chas. M. Hays assumes the duties of General Manager of the Grand Trunk Railway, to which position he was appointed some months ago. Succeeding Mr. L. J. Seargeant, who retires from the management of the road to act in an advisory capacity to the Board of Di rectors In London. Mr. Bay: is an able manager. And his friends expect that he will make a record on the Grand Trunk which will be creditable to himself and exceedingly satisfactory to the owners and patrons of the road. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Author: G. M. Basford
Publisher: Forgotten Books
ISBN: 9780656041749
Category : Technology & Engineering
Languages : en
Pages : 414
Get Book Here
Book Description
Excerpt from American Engineer and Railroad Journal, 1901, Vol. 75 This new car is interesting because of the trussing, the depth of the body bolsters, the use of three needle beams, the stiffening of the siding, and, chiefly, because the design has been approved for adoption on the Chicago Northwestern; the Chicago, St. Paul, Minneapolis Omaha; the Fremont. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Author: G. M. Basford
Publisher: Forgotten Books
ISBN: 9780332849836
Category : Technology & Engineering
Languages : en
Pages : 420
Get Book Here
Book Description
Excerpt from American Engineer and Railroad Journal, 1899, Vol. 73 There are good reasons for believing that the Carnegie Steel Company will undertake the building of steel cars and that a large plant will be erected near Homestead, Pittsburgh, for this purpose. The Iron Age says. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Author:
Publisher:
ISBN:
Category : Railroad engineering
Languages : en
Pages : 854
Get Book Here
Book Description
Author:
Publisher: Forgotten Books
ISBN: 9780332171654
Category : Technology & Engineering
Languages : en
Pages : 404
Get Book Here
Book Description
Excerpt from American Engineer and Railroad Journal, Vol. 74: January, 1900 The new work in progress includes an installment of heavy simple engines, and an installment of four-cylinder compounds, the two classes being quite similar except as to cylinder ar rangement and the details depending thereon. These locomotives in common with the new engines of the Lancashire and Yorkshire, to which I referred in a previous letter, have a center frame which in its present form at least, constitutes a new element in locomotive design. The center frame is a deep cast-steel member, extending longitudinally from the cylinders to a cross-brace back of the main axle. Its purpose is to provide support for a third bearing on the crank-axles, for which the straight portion between the cranks serves as the journal. With the addition of this hearing, the full length of the crank axle, except that portion which is taken by the wheels and the webs of the cranks, is utilized as journal surface, a condition made possible by the use of the Joy valve-gear and the consequent absence of eccentrics. The center-bearing is not allowed to carry any considerable portion of the weight of the engine, but is designed chiefly to resist the thrust of the cranks. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Author: M. N. Forney
Publisher: Forgotten Books
ISBN: 9781333699840
Category : Technology & Engineering
Languages : en
Pages : 574
Get Book Here
Book Description
Excerpt from American Engineer and Railroad Journal, 1895, Vol. 69 The book before us will be useful in giving designs of vari ous kinds of letters which are easily made with a pen, and by adopting such forms a draughtsman may save a great deal of time which would be wasted if he tried to imitate on a small scale the work of a sign painter or engraver. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Author: Anonymous
Publisher: Palala Press
ISBN: 9781354943007
Category :
Languages : en
Pages : 448
Get Book Here
Book Description
This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
