Alignment of the CMS Silicon Strip Tracker During Stand-alone Commissioning

Alignment of the CMS Silicon Strip Tracker During Stand-alone Commissioning PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 7002

Get Book Here

Book Description
The results of the CMS tracker alignment analysis are presented using the data from cosmic tracks, optical survey information, and the laser alignment system at the Tracker Integration Facility at CERN. During several months of operation in the spring and summer of 2007, about five million cosmic track events were collected with a partially active CMS Tracker. This allowed us to perform first alignment of the active silicon modules with the cosmic tracks using three different statistical approaches; validate the survey and laser alignment system performance; and test the stability of Tracker structures under various stresses and temperatures ranging from +15C to -15C. Comparison with simulation shows that the achieved alignment precision in the barrel part of the tracker leads to residual distributions similar to those obtained with a random misalignment of 50 (80) microns in the outer (inner) part of the barrel.

Alignment of the CMS Silicon Strip Tracker During Stand-alone Commissioning

Alignment of the CMS Silicon Strip Tracker During Stand-alone Commissioning PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 7002

Get Book Here

Book Description
The results of the CMS tracker alignment analysis are presented using the data from cosmic tracks, optical survey information, and the laser alignment system at the Tracker Integration Facility at CERN. During several months of operation in the spring and summer of 2007, about five million cosmic track events were collected with a partially active CMS Tracker. This allowed us to perform first alignment of the active silicon modules with the cosmic tracks using three different statistical approaches; validate the survey and laser alignment system performance; and test the stability of Tracker structures under various stresses and temperatures ranging from +15C to -15C. Comparison with simulation shows that the achieved alignment precision in the barrel part of the tracker leads to residual distributions similar to those obtained with a random misalignment of 50 (80) microns in the outer (inner) part of the barrel.

Alignment of the CMS Silicon Tracker During Commissioning with Cosmic Rays

Alignment of the CMS Silicon Tracker During Commissioning with Cosmic Rays PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 39

Get Book Here

Book Description


The CMS Silicon Strip Tracker

The CMS Silicon Strip Tracker PDF Author: Oliver Pooth
Publisher: Springer Science & Business Media
ISBN: 383489639X
Category : Science
Languages : en
Pages : 147

Get Book Here

Book Description
Oliver Pooth describes the silicon strip tracker of the CMS detector and discusses methods of quality control that are new to the field of particle detector physics. These methods were established to guarantee a uniform behaviour of all detector modules which were built and tested in various places worldwide.

A Boson Learned from its Context, and a Boson Learned from its End

A Boson Learned from its Context, and a Boson Learned from its End PDF Author: Jeffrey Roskes
Publisher: Springer Nature
ISBN: 3030580113
Category : Science
Languages : en
Pages : 144

Get Book Here

Book Description
This thesis develops fundamental ideas and advanced techniques for studying the Higgs boson’s interactions with the known matter and force particles. The Higgs boson appears as an excitation of the Higgs field, which permeates the vacuum. Several other phenomena in our Universe, such as dark energy, dark matter, and the abundance of matter over antimatter, remain unexplained. The Higgs field may prove to be the connection between our known world and the “dark” world, and studies of the Higgs boson's interactions are essential to reveal possible new phenomena. The unique feature of this work is simultaneous measurement of the Higgs boson’s associated production (its context, to use the language of the title) and its decay (its end), while allowing for multiple parameters sensitive to new phenomena. This includes computer simulation with Monte Carlo techniques of the complicated structure of the Higgs boson interactions, the matrix-element calculation of per-event likelihoods for optimal observables, and advanced fitting methods with hundreds of intricate components that cover all possible parameters and quantum mechanical interference. This culminates in the most advanced analysis of LHC data in the multi-parameter approach to Higgs physics in its single golden four-lepton decay channel to date. Optimization of the CMS detector’s silicon-based tracking system, essential for these measurements, is also described.

At The Leading Edge: The Atlas And Cms Lhc Experiments

At The Leading Edge: The Atlas And Cms Lhc Experiments PDF Author: Daniel Green
Publisher: World Scientific
ISBN: 9814467510
Category : Science
Languages : en
Pages : 445

Get Book Here

Book Description
Too often descriptions of detectors focus on the 'what' and not the 'why'. This volume aims to elucidate how the requirements of the physics at the Large Hadron Collider (LHC) define the detector environment. In turn, the detector choices are made to adopt to that environment. The goal of LHC physics is to explore the mechanism for electroweak symmetry breaking. Because of the minuscule cross-sections which need to be explored, 0.1 fb, the LHC needs to provide 100 fb-1/yr, or an instantaneous luminosity of 1034 / (cm2 sec). With a bunch crossing interval of 25 nsec, well matched to detector speeds, there will be 25 events occupying each bunch crossing.Thus the physics requires fast, finely segmented, low noise and radiation resistant detectors which provide redundant measurements of the rarely produced electrons and muons. To achieve those goals, new ground was broken in constructing the A Toroidal LHC ApparatuS (ATLAS) and Compact Muon Solenoid (CMS) detectors in the vertex detectors, tracking systems, calorimetry, strong magnets, muon systems, front end electronics, trigger systems, and in the data acquisition methods used.

Commissioning and Performance of the CMS Silicon Strip Tracker with Cosmic Ray Muons

Commissioning and Performance of the CMS Silicon Strip Tracker with Cosmic Ray Muons PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 45

Get Book Here

Book Description


Performance Studies of the CMS Strip Tracker Before Installation

Performance Studies of the CMS Strip Tracker Before Installation PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 6010

Get Book Here

Book Description
In March 2007 the assembly of the Silicon Strip Tracker was completed at the Tracker Integration Facility at CERN. Nearly 15% of the detector was instrumented using cables, fiber optics, power supplies, and electronics intended for the operation at the LHC. A local chiller was used to circulate the coolant for low temperature operation. In order to understand the efficiency and alignment of the strip tracker modules, a cosmic ray trigger was implemented. From March through July 4.5 million triggers were recorded. This period, referred to as the Sector Test, provided practical experience with the operation of the Tracker, especially safety, data acquisition, power, and cooling systems. This paper describes the performance of the strip system during the Sector Test, which consisted of five distinct periods defined by the coolant temperature. Significant emphasis is placed on comparisons between the data and results from Monte Carlo studies.

Mechanical Stability of the CMS Strip Tracker Measured with a Laser Alignment System

Mechanical Stability of the CMS Strip Tracker Measured with a Laser Alignment System PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
The CMS tracker consists of 206 square meters of silicon strip sensors assembled on carbon fibre composite structures and is designed for operation in the temperature range from -25 to +25 degrees C. The mechanical stability of tracker components during physics operation was monitored with a few micron resolution using a dedicated laser alignment system as well as particle tracks from cosmic rays and hadron-hadron collisions. During the LHC operational period of 2011-2013 at stable temperatures, the components of the tracker were observed to experience relative movements of less than 30 microns. In addition, temperature variations were found to cause displacements of tracker structures of about 2 microns/degree C, which largely revert to their initial positions when the temperature is restored to its original value.

Track Based Alignment of the CMS Silicon Tracker and Its Implication on Physics Performance

Track Based Alignment of the CMS Silicon Tracker and Its Implication on Physics Performance PDF Author: Jula Draeger
Publisher:
ISBN:
Category :
Languages : en
Pages : 155

Get Book Here

Book Description


Proceedings of the First LHC Detector Alignment Workshop

Proceedings of the First LHC Detector Alignment Workshop PDF Author: S. Blusk
Publisher:
ISBN:
Category : Detectors
Languages : en
Pages : 242

Get Book Here

Book Description