Aerodynamic Characteristics and Pressure Distributions for an Executive-Jet Baseline Airfoil Section PDF Download

Author: National Aeronautics and Space Administration (NASA)
Publisher: Createspace Independent Publishing Platform
ISBN: 9781722927851
Category :
Languages : en
Pages : 112

Get Book Here

Book Description
A wind tunnel test of an executive-jet baseline airfoil model was conducted in the adaptive-wall test section of the NASA Langley 0.3-Meter Transonic Cryogenic Tunnel. The primary goal of the test was to measure airfoil aerodynamic characteristics over a wide range of flow conditions that encompass two design points. The two design Mach numbers were 0.654 and 0.735 with corresponding Reynolds numbers of 4.5 x 10(exp 6) and 8.9 x 10(exp 6) based on chord, respectively, and normal-force coefficients of 0.98 and 0.51, respectively. The tests were conducted over a Mach number range from 0.250 to 0.780 and a chord Reynolds number range from 3 x 10(exp 6) to 18 x 10(exp 6). The angle of attack was varied from -2 deg to a maximum below 10 deg with one exception in which the maximum was 14 deg for a Mach number of 0.250 at a chord Reynolds number of 4.5 x 10(exp 6). Boundary-layer transition was fixed at 5 percent of chord on both the upper and lower surfaces of the model for most of the test. The adaptive-wall test section had flexible top and bottom walls and rigid sidewalls. Wall interference was minimized by the movement of the adaptive walls, and the airfoil aerodynamic characteristics were corrected for any residual top and bottom wall interference. Allison, Dennis O. and Mineck, Raymond E. Langley Research Center AERODYNAMIC CHARACTERISTICS; AERODYNAMIC INTERFERENCE; AIRFOIL PROFILES; BOUNDARY LAYER TRANSITION; FLOW CHARACTERISTICS; PRESSURE DISTRIBUTION; WIND TUNNEL TESTS; ANGLE OF ATTACK; CRYOGENIC WIND TUNNELS; MACH NUMBER; REYNOLDS NUMBER; TRANSONIC WIND TUNNELS; WALL FLOW...