Author: William S. Pellini
Publisher:
ISBN: 9781581451290
Category : Steel
Languages : en
Pages : 46
Get Book Here
Book Description
The state of knowledge of fracture-safe design for steels is examined in relation to the requirements for achieving practical solutions to general engineering problems. Analytical procedures evolved from fracture mechanics theory are demonstrated to provide for quantitative interpretations of engineering fracture toughness tests. It is thus possible to couple the procedural simplicity which is inherent to engineering tests with the analytical advantages of fracture mechanics theory. The coupling of these two approaches provides for practical advances in fracture-safe design which cover the totality of general engineering problems and requirements. The Charpy V test is shown to have applicability for use in the described fashion primarily in relation to the strength transition for high strength steels. The combined diagrams should serve the needs of both the materials and design fields. (Author).
Author: W. S. Pellini
Publisher:
ISBN:
Category : Steel
Languages : en
Pages : 82
Get Book Here
Book Description
The state of knowledge of fracture-safe design for steels is examined in relation to the requirements for achieving practical solutions to general engineering problems. Analytical procedures evolved from fracture mechanics theory are demonstrated to provide for quantitative interpretations of engineering fracture toughness tests. It is thus possible to couple the procedural simplicity which is inherent to engineering tests with the analytical advantages of fracture mechanics theory. The coupling of these two approaches provides for practical advances in fracture-safe design which cover the totality of general engineering problems and requirements. The Charpy V test is shown to have applicability for use in the described fashion primarily in relation to the strength transition for high strength steels. The combined diagrams should serve the needs of both the materials and design fields. (Author).
Author: W. S. Pellini
Publisher:
ISBN:
Category :
Languages : en
Pages : 82
Get Book Here
Book Description
Author: Naval Research Laboratory (U.S.)
Publisher:
ISBN:
Category : Naval research
Languages : en
Pages : 562
Get Book Here
Book Description
Author: Peter P. Puzak
Publisher:
ISBN:
Category : Steel
Languages : en
Pages : 36
Get Book Here
Book Description
The yield strength range for steels from 180 to 210 ksi is currently covered by four weldable alloys of the following nominal chemical analysis: 18%Ni-8%Co-3%Mo maraging steel, 12%Ni-5%Cr-3%Mo maraging steel, 9%Ni-4%Co-0.20%C quenched and tempered (Q and T) steel, and 10%Ni-8%Co-2%Cr-1%Mo-0.10%C Q and T steel. Broad ranges of fracture resistance have been reported for these materials based on various fracture tests, and this report presents information for material selection and design guidance by providing an analysis of the interactions between the metallurgical and mechanical parameters that contribute to the fracture resistance of plate products. Definitions of the interaction between the metallurgical and the mechanical aspects are developed with the use of the Dynamic Tear (DT) test and the Ratio Analysis Diagram (RAD). (Author).
Author: Alexander Blake
Publisher: CRC Press
ISBN: 9780824796785
Category : Technology & Engineering
Languages : en
Pages : 458
Get Book Here
Book Description
Emphasizing a balanced approach to design that integrates fracture mechanics, materials science and stress analysis, this work explains the fundamentals of fracture and provides clear definitions, basic formulas and worked examples. Case studies highlight fracture mechanics parameters of particular materials and hands-on stress analysis techniques.
Author: R. J. Goode
Publisher:
ISBN: 9781581451337
Category : Fracture mechanics
Languages : en
Pages : 17
Get Book Here
Book Description
Interpretations of fracture toughness characteristics, as measured by various test procedures, for solutions of general engineering problems are presented for structural titanium alloys. Analytical procedures evolved from fracture mechanics theory are used for quantitative interpretations of engineering fracture toughness tests. The procedural simplicity of the engineering tests coupled with the analytical capabilities of fracture mechanics theory provides for a significant advancement in failure-safe design procedures for titanium alloys covering the full range of strength levels. (Author).
Author: R. W Judy (Jr)
Publisher:
ISBN: 9781581451399
Category : Aluminum alloys
Languages : en
Pages : 16
Get Book Here
Book Description
Interpretations of fracture toughness characteristics as measured by various test procedures are presented for structural aluminum alloys. Quantitative definitions of the significance of engineering fracture toughness tests are provided by extension of analytical procedures evolved from fracture mechanics theory. The procedural simplicity of the engineering tests coupled with the analytical capabilities of fracture mechanics theory provides for a significant advancement in fracture-safe design procedures for aluminum alloys covering the full range of yield strength. (Author).
Author:
Publisher:
ISBN:
Category : Civil engineering
Languages : en
Pages : 570
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1730
Get Book Here
Book Description
