Advanced Chemometrics and Fundamental Considerations for Non-targeted Analysis with Comprehensive Multidimensional Gas Chromatography Coupled with Time-of-flight Mass Spectrometry

Advanced Chemometrics and Fundamental Considerations for Non-targeted Analysis with Comprehensive Multidimensional Gas Chromatography Coupled with Time-of-flight Mass Spectrometry PDF Author: Sarah Elizabeth Prebihalo
Publisher:
ISBN:
Category :
Languages : en
Pages : 151

Get Book Here

Book Description
Comprehensive two-dimensional gas chromatography (GCxGC) coupled with time-of-flight mass spectrometry (TOFMS) is a powerful analytical technique capable of separating complex mixtures, providing valuable information about the chemical composition of samples. However, the inherent data density associated with three-dimensional data provides a unique challenge to analytical chemists. As a result, significant effort has been invested in utilizing advanced chemometrics to glean meaningful information about samples from large and complex data sets. Herein, this dissertation introduces several investigations conducted on optimizing separation conditions to be amenable to chemometric deconvolution algorithms as well as the development, study, and application of advanced chemometric techniques applied to GCxGC-TOFMS data. To begin, the metric trilinear deviation ratio (TDR) is utilized to study the impact of experimental parameters such as column selection and modulation period, PM, on the quantitative accuracy of parallel factor analysis (PARAFAC) deconvolution. TDR scales with increasing change in second dimension retention time, delta2tR, associated with pseudo-isothermal conditions on the second dimension, 2D, and quantitative accuracy decreases as TDR increases. Two column sets were utilized with varying film thickness on the first column, 1D, and each column set was studied using two PM for a total of 4 experiments. It was reported that using 1D columns with larger film thicknesses allows the analyst to employ a shorter PM, in turn lowering the delta2tR, leading to higher quantitative accuracy. Many GCxGC-TOFMS studies relate to identifying class distinguishing analytes and can be tedious when performed manually. Fortunately, the use of discovery-based chemometric tools such as principal component analysis (PCA) and Fisher ratio (F-ratio) analysis has increased in popularity as less time-intensive and automated techniques for untargeted analyses. To begin, this dissertation will investigate mass channel purity obtained via the tile-based F-ratio algorithm using diesel fuel spiked with non-native analytes using GCxGC-TOFMS. The F-ratio algorithm, considered a supervised discovery technique because class membership is known a priori, was first used to "discover" the spiked non-native analytes. Then, using a novel signal ratio (S-ratio) algorithm, the mass channel selectivity information output by the F-ratio method was studied using three statistical metrics: null distribution analysis, p-value, and lack-of-fit (LOF). The result of this investigation revealed that a mass channel has a high likelihood of being pure when its p-value and LOF are sufficiently low. Finally, F-ratio analysis was applied to a dataset including patients with an anterior cruciate ligament (ACL) injury to discover potential biomarkers of post-traumatic osteoarthritis (PTOA) post-injury. Standard F-ratios are calculated by the between class variance divided by the sum of the within-class variance, scaling up as the between class variance increases and the within-class variance remains sufficiently small. However, many biological studies involve significant biological variance (~30%) that may not be associated with disease state or injury severity, etc. Herein, the standard tile-based F-ratio algorithm was modified to use only the within-class variance associated with control samples. It was expected that the control class contained less within-class variance relative to the patient class, due to the expectation that some patient samples would be associated with increased severity of injury or the presence of coexisting conditions. Hit lists (metabolites discovered via F-ratio) from standard F-ratio and control-normalized F-ratio were studied and directly compared to establish a comprehensive metabolome of potential biomarkers for PTOA development post ACL injury. Reported in this dissertation is a discussion on the complementary nature of standard and control-normalized F-ratio, followed by demonstration of class distinguishing metabolites via PCA.

Advanced Chemometrics and Fundamental Considerations for Non-targeted Analysis with Comprehensive Multidimensional Gas Chromatography Coupled with Time-of-flight Mass Spectrometry

Advanced Chemometrics and Fundamental Considerations for Non-targeted Analysis with Comprehensive Multidimensional Gas Chromatography Coupled with Time-of-flight Mass Spectrometry PDF Author: Sarah Elizabeth Prebihalo
Publisher:
ISBN:
Category :
Languages : en
Pages : 151

Get Book Here

Book Description
Comprehensive two-dimensional gas chromatography (GCxGC) coupled with time-of-flight mass spectrometry (TOFMS) is a powerful analytical technique capable of separating complex mixtures, providing valuable information about the chemical composition of samples. However, the inherent data density associated with three-dimensional data provides a unique challenge to analytical chemists. As a result, significant effort has been invested in utilizing advanced chemometrics to glean meaningful information about samples from large and complex data sets. Herein, this dissertation introduces several investigations conducted on optimizing separation conditions to be amenable to chemometric deconvolution algorithms as well as the development, study, and application of advanced chemometric techniques applied to GCxGC-TOFMS data. To begin, the metric trilinear deviation ratio (TDR) is utilized to study the impact of experimental parameters such as column selection and modulation period, PM, on the quantitative accuracy of parallel factor analysis (PARAFAC) deconvolution. TDR scales with increasing change in second dimension retention time, delta2tR, associated with pseudo-isothermal conditions on the second dimension, 2D, and quantitative accuracy decreases as TDR increases. Two column sets were utilized with varying film thickness on the first column, 1D, and each column set was studied using two PM for a total of 4 experiments. It was reported that using 1D columns with larger film thicknesses allows the analyst to employ a shorter PM, in turn lowering the delta2tR, leading to higher quantitative accuracy. Many GCxGC-TOFMS studies relate to identifying class distinguishing analytes and can be tedious when performed manually. Fortunately, the use of discovery-based chemometric tools such as principal component analysis (PCA) and Fisher ratio (F-ratio) analysis has increased in popularity as less time-intensive and automated techniques for untargeted analyses. To begin, this dissertation will investigate mass channel purity obtained via the tile-based F-ratio algorithm using diesel fuel spiked with non-native analytes using GCxGC-TOFMS. The F-ratio algorithm, considered a supervised discovery technique because class membership is known a priori, was first used to "discover" the spiked non-native analytes. Then, using a novel signal ratio (S-ratio) algorithm, the mass channel selectivity information output by the F-ratio method was studied using three statistical metrics: null distribution analysis, p-value, and lack-of-fit (LOF). The result of this investigation revealed that a mass channel has a high likelihood of being pure when its p-value and LOF are sufficiently low. Finally, F-ratio analysis was applied to a dataset including patients with an anterior cruciate ligament (ACL) injury to discover potential biomarkers of post-traumatic osteoarthritis (PTOA) post-injury. Standard F-ratios are calculated by the between class variance divided by the sum of the within-class variance, scaling up as the between class variance increases and the within-class variance remains sufficiently small. However, many biological studies involve significant biological variance (~30%) that may not be associated with disease state or injury severity, etc. Herein, the standard tile-based F-ratio algorithm was modified to use only the within-class variance associated with control samples. It was expected that the control class contained less within-class variance relative to the patient class, due to the expectation that some patient samples would be associated with increased severity of injury or the presence of coexisting conditions. Hit lists (metabolites discovered via F-ratio) from standard F-ratio and control-normalized F-ratio were studied and directly compared to establish a comprehensive metabolome of potential biomarkers for PTOA development post ACL injury. Reported in this dissertation is a discussion on the complementary nature of standard and control-normalized F-ratio, followed by demonstration of class distinguishing metabolites via PCA.

Advanced Chemometric Techniques for the Analysis of Complex Samples Using One- and Two-dimensional Gas Chromatography Coupled with Time-of-flight Mass Spectrometry

Advanced Chemometric Techniques for the Analysis of Complex Samples Using One- and Two-dimensional Gas Chromatography Coupled with Time-of-flight Mass Spectrometry PDF Author: Brooke C. Reaser
Publisher:
ISBN:
Category :
Languages : en
Pages : 172

Get Book Here

Book Description
Gas chromatography is a powerful separation technique that alone, and when coupled with mass spectrometric detection, can provide detailed information regarding the chemical composition of complex mixtures. Advanced chemometric algorithms are often applied to the data generated from these gas chromatographic separations in order to glean additional meaningful information from large and complex data sets. This dissertation presents several research investigations conducted on the development, optimization, application and study of several chemometric algorithms applied to one- and two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (TOFMS). The two-dimensional mass cluster method and principal component analysis (PCA) were applied to a non-targeted investigation of the stable-isotope incorporation of metabolites present in the metabolome of the methylotrophic bacteria Methylobacterium extorquens AM1 using gas chromatography time-of-flight mass spectrometry (GC-TOFMS). The area under the curve (AUC) of receiver operating characteristic (ROC) curves were used as quantitative metrics for the optimization of the tile-based Fisher ratio method using diesel fuel spiked with native and non-native analytes using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry (GC × GC – TOFMS). This optimized algorithm was then applied to a process analytical chemistry (PAC) investigation into the source of catalyst yield reduction in an industrial polymerization plant. Finally, a GC-TOFMS simulation-based study determined the chemometric limit of resolution for deconvoluting analytes using multivariate curve resolution alternating least squares (MCR-ALS) and compared the results to expected theory surrounding the probability of peak overlap.

Comprehensive Two-dimensional Gas Chromatography Time-of-flight Mass Spectrometry with Chemometric Analysis

Comprehensive Two-dimensional Gas Chromatography Time-of-flight Mass Spectrometry with Chemometric Analysis PDF Author: Amanda Elizabeth Moses Sinha
Publisher:
ISBN:
Category : Gas chromatography
Languages : en
Pages : 410

Get Book Here

Book Description


Liquid Chromatography Time-of-Flight Mass Spectrometry

Liquid Chromatography Time-of-Flight Mass Spectrometry PDF Author: Imma Ferrer
Publisher: John Wiley & Sons
ISBN: 047042995X
Category : Science
Languages : en
Pages : 281

Get Book Here

Book Description
Time of flight mass spectrometry identifies the elements of a compound by subjecting a sample of ions to a strong electrical field. Illuminating emerging analytical techniques in high-resolution mass spectrometry, Liquid Chromatography Time-of-Flight Mass Spectrometry shows readers how to analyze unknown and emerging contaminants—such as antibiotics, steroids, analgesics—using advanced mass spectrometry techniques. The text combines theoretical discussion with concrete examples, making it suitable for analytical chemists, environmental chemists, organic chemists, medicinal chemists, university research chemists, and graduate and post-doctorate students.

Fundamentals and Analytical Applications of Multiway Calibration

Fundamentals and Analytical Applications of Multiway Calibration PDF Author:
Publisher: Elsevier
ISBN: 0444635378
Category : Computers
Languages : en
Pages : 612

Get Book Here

Book Description
Fundamentals and Analytical Applications of Multi-Way Calibration presents researchers with a set of effective tools they can use to obtain the maximum information from instrumental data. It includes the most advanced techniques, methods, and algorithms related to multi-way calibration and the ways they can be applied to solve actual analytical problems. This book provides a comprehensive coverage of the main aspects of multi-way analysis, including fundamentals and selected applications of chemometrics that can resolve complex analytical chemistry problems through the use of multi-way calibration. Includes the most advanced techniques, methods, and algorithms related to multi-way calibration and the ways they can be applied to solve actual analytical problems Presents researchers with a set of effective tools they can use to obtain the maximum information from instrumental data Provides comprehensive coverage of the main aspects of multi-way analysis, including fundamentals and selected applications of chemometrics

Advanced Techniques in Gas Chromatography-Mass Spectrometry (GC-MS-MS and GC-TOF-MS) for Environmental Chemistry

Advanced Techniques in Gas Chromatography-Mass Spectrometry (GC-MS-MS and GC-TOF-MS) for Environmental Chemistry PDF Author:
Publisher: Newnes
ISBN: 0444626247
Category : Science
Languages : en
Pages : 0

Get Book Here

Book Description
Gas chromatography mass spectrometry (GC-MS) has been the technique of choice of analytical scientists for many years. The latest developments in instrumentation, including tandem mass spectrometry (MS-MS) and time-of-flight (TOF) detectors, have opened up and broadened the scope of environmental analytical chemistry. This book summarizes the major advances and relevant applications of GC-MS techniques over the last 10 years, with chapters by leading authors in the field of environmental chemistry. The authors are drawn from academia, industry and government. The book is organized in three main parts. Part I covers applications of basic GC-MS to solve environmental-related problems. Part II focuses on GC-MS-MS instrumentation for the analyses of a broad range of analysis in environmental samples (pesticides, persistent organic pollutants, endocrine disruptors, etc.). Part III covers the use of more advanced GC-MS techniques using low- and high-resolution mass spectrometry for many applications related to the environment, food and industry. - Summarizes the major advances of GC-MS techniques in the last decade - Presents relevant applications of GC-MS techniques - Covers academic, industrial and governmental sectors

Food Authentication

Food Authentication PDF Author: Contantinos A. Georgiou
Publisher: John Wiley & Sons
ISBN: 1118810260
Category : Technology & Engineering
Languages : en
Pages : 581

Get Book Here

Book Description
The determination of food authenticity is a vital component of quality control. Its importance has been highlighted in recent years by high-profile cases in the global supply chain such as the European horsemeat scandal and the Chinese melamine scandal which led to six fatalities and the hospitalisation of thousands of infants. As well as being a safety concern, authenticity is also a quality criterion for food and food ingredients. Consumers and retailers demand that the products they purchase and sell are what they purport to be. This book covers the most advanced techniques used for the authentication of a vast number of products around the world. The reader will be informed about the latest pertinent analytical techniques. Chapters focus on the novel techniques & markers that have emerged in recent years. An introductory section presents the concepts of food authentication while the second section examines in detail the analytical techniques for the detection of fraud relating to geographical, botanical, species and processing origin and production methods of food materials and ingredients. Finally, the third section looks at consumer attitudes towards food authenticity, the application of bioinformatics to this field, and the Editor’s conclusions and future outlook. Beyond being a reference to researchers working in food authentication it will serve as an essential source to analytical scientists interested in the field and food scientists to appreciate analytical approaches. This book will be a companion to under- and postgraduate students in their wander in food authentication and aims to be useful to researchers in universities and research institutions.

Basic Multidimensional Gas Chromatography

Basic Multidimensional Gas Chromatography PDF Author:
Publisher: Academic Press
ISBN: 0128137460
Category : Science
Languages : en
Pages : 332

Get Book Here

Book Description
Basic Multidimensional Gas Chromatography is aimed at the next generation of multidimensional gas chromatography users who will require basic training in the fundamentals of both GC and GCxGC. This book fills the current need for an inexpensive, straightforward guidebook to get new users started. It will help new users determine when to add or purchase a multidimensional system and teach them to optimize and maximize the capability of each system. Readers will also learn to select specific modes for each portion of a multidimensional analysis. This ideal resource is a concise, hard-hitting text that provides the facts needed to get users up and running. Provides a comprehensive and fundamental introduction to multidimensional gas chromatography Assists readers in determining when to add or purchase a multidimensional system Explains how a given system can be used to its maximum capacity and how users should choose specific modes for different portions of multidimensional analysis

Gas Chromatography and Mass Spectrometry

Gas Chromatography and Mass Spectrometry PDF Author: Fulton G. Kitson
Publisher: Academic Press
ISBN: 0080532322
Category : Science
Languages : en
Pages : 395

Get Book Here

Book Description
This guide provides, under one cover, a wealth of practical information designed to facilitate the effectiveness of the GC/MS user. Separation conditions for numerous compound types are provided along with derivatized and underivatized compounds. A section on how to interpret mass spectral data, an extensive correlation of ion masses and neutral losses with possible structures, and examples of mass spectra are provided to further aid structure determination. Also included are basic information on instrumentation, ionization methods, quantitation, tips on the operation of mass spectrometers, the best derivatization procedures for a variety of compound types, troubleshooting techniques, and a variety of other information found to be useful to the practicing user of GC/MS instrumentation. This guide would be immediately valuable to the novice as well as the experienced GC/MS user who may not have the breadth of experience covered in this book.Key Features* Condenses and organizes recent and essential information for new and experienced GC/MS users* Comprehensively indexed and referenced* Includes practical methods of analysis* Serves as a text reference for short practical courses on the subject

Chemometrics in Chromatography

Chemometrics in Chromatography PDF Author: Łukasz Komsta
Publisher: CRC Press
ISBN: 1351650440
Category : Science
Languages : en
Pages : 588

Get Book Here

Book Description
Chemometrics uses advanced mathematical and statistical algorithms to provide maximum chemical information by analyzing chemical data, and obtain knowledge of chemical systems. Chemometrics significantly extends the possibilities of chromatography and with the technological advances of the personal computer and continuous development of open-source software, many laboratories are interested in incorporating chemometrics into their chromatographic methods. This book is an up-to-date reference that presents the most important information about each area of chemometrics used in chromatography, demonstrating its effective use when applied to a chromatographic separation.