Author: Godfrin, Aurélien
Publisher: KIT Scientific Publishing
ISBN: 3731510960
Category : Technology & Engineering
Languages : en
Pages : 146
Book Description
This work focuses on two topics. The first is the investigation of producing filaments on copper-stabilized coated conductors, with striations made after or before electroplating the tape. The second topic is the applicability of the striations for reducing the AC losses of cables, in particular the CORC® and RACC cables, which are made with high-temperature superconductor (HTS) striated tapes.
AC Losses in High-Temperature Superconductor Tapes and Cables for Power Applications
Author: Godfrin, Aurélien
Publisher: KIT Scientific Publishing
ISBN: 3731510960
Category : Technology & Engineering
Languages : en
Pages : 146
Book Description
This work focuses on two topics. The first is the investigation of producing filaments on copper-stabilized coated conductors, with striations made after or before electroplating the tape. The second topic is the applicability of the striations for reducing the AC losses of cables, in particular the CORC® and RACC cables, which are made with high-temperature superconductor (HTS) striated tapes.
Publisher: KIT Scientific Publishing
ISBN: 3731510960
Category : Technology & Engineering
Languages : en
Pages : 146
Book Description
This work focuses on two topics. The first is the investigation of producing filaments on copper-stabilized coated conductors, with striations made after or before electroplating the tape. The second topic is the applicability of the striations for reducing the AC losses of cables, in particular the CORC® and RACC cables, which are made with high-temperature superconductor (HTS) striated tapes.
Superconductors in the Power Grid
Author: C. Rey
Publisher: Elsevier
ISBN: 1782420371
Category : Technology & Engineering
Languages : en
Pages : 463
Book Description
Superconductors offer high throughput with low electric losses and have the potential to transform the electric power grid. Transmission networks incorporating cables of this type could, for example, deliver more power and enable substantial energy savings. Superconductors in the Power Grid: Materials and Applications provides an overview of superconductors and their applications in power grids. Sections address the design and engineering of cable systems and fault current limiters and other emerging applications for superconductors in the power grid, as well as case studies of industrial applications of superconductors in the power grid. - Expert editor from highly respected US government-funded research centre - Unique focus on superconductors in the power grid - Comprehensive coverage
Publisher: Elsevier
ISBN: 1782420371
Category : Technology & Engineering
Languages : en
Pages : 463
Book Description
Superconductors offer high throughput with low electric losses and have the potential to transform the electric power grid. Transmission networks incorporating cables of this type could, for example, deliver more power and enable substantial energy savings. Superconductors in the Power Grid: Materials and Applications provides an overview of superconductors and their applications in power grids. Sections address the design and engineering of cable systems and fault current limiters and other emerging applications for superconductors in the power grid, as well as case studies of industrial applications of superconductors in the power grid. - Expert editor from highly respected US government-funded research centre - Unique focus on superconductors in the power grid - Comprehensive coverage
High Temperature Superconductors (HTS) for Energy Applications
Author: Ziad Melhem
Publisher: Elsevier
ISBN: 0857095293
Category : Technology & Engineering
Languages : en
Pages : 428
Book Description
High temperature superconductors (HTS) offer many advantages through their application in electrical systems, including high efficiency performance and high throughput with low-electrical losses. While cryogenic cooling and precision materials manufacture is required to achieve this goal, cost reductions without significant performance loss are being achieved through the advanced design and development of HTS wires, cables and magnets, along with improvements in manufacturing methods. This book explores the fundamental principles, design and development of HTS materials and their practical applications in energy systems.Part one describes the fundamental science, engineering and development of particular HTS components such as wires and tapes, cables, coils and magnets and discusses the cryogenics and electromagnetic modelling of HTS systems and materials. Part two reviews the types of energy applications that HTS materials are used in, including fault current limiters, power cables and energy storage, as well as their application in rotating machinery for improved electrical efficiencies, and in fusion technologies and accelerator systems where HTS magnets are becoming essential enabling technologies.With its distinguished editor and international team of expert contributors, High temperature superconductors (HTS) for energy applications is an invaluable reference tool for anyone involved or interested in HTS materials and their application in energy systems, including materials scientists and electrical engineers, energy consultants, HTS materials manufacturers and designers, and researchers and academics in this field. - Discusses fundamental issues and developments of particular HTS components - Comprehensively reviews the design and development of HTS materials and then applications in energy systems - Reviews the use of HTS materials and cabling transmissions, fault alignment limiters, energy storage, generators and motors, fusion and accelerator
Publisher: Elsevier
ISBN: 0857095293
Category : Technology & Engineering
Languages : en
Pages : 428
Book Description
High temperature superconductors (HTS) offer many advantages through their application in electrical systems, including high efficiency performance and high throughput with low-electrical losses. While cryogenic cooling and precision materials manufacture is required to achieve this goal, cost reductions without significant performance loss are being achieved through the advanced design and development of HTS wires, cables and magnets, along with improvements in manufacturing methods. This book explores the fundamental principles, design and development of HTS materials and their practical applications in energy systems.Part one describes the fundamental science, engineering and development of particular HTS components such as wires and tapes, cables, coils and magnets and discusses the cryogenics and electromagnetic modelling of HTS systems and materials. Part two reviews the types of energy applications that HTS materials are used in, including fault current limiters, power cables and energy storage, as well as their application in rotating machinery for improved electrical efficiencies, and in fusion technologies and accelerator systems where HTS magnets are becoming essential enabling technologies.With its distinguished editor and international team of expert contributors, High temperature superconductors (HTS) for energy applications is an invaluable reference tool for anyone involved or interested in HTS materials and their application in energy systems, including materials scientists and electrical engineers, energy consultants, HTS materials manufacturers and designers, and researchers and academics in this field. - Discusses fundamental issues and developments of particular HTS components - Comprehensively reviews the design and development of HTS materials and then applications in energy systems - Reviews the use of HTS materials and cabling transmissions, fault alignment limiters, energy storage, generators and motors, fusion and accelerator
Development of high-temperature superconductor cables for high direct current applications
Author: Preuß, Alan
Publisher: KIT Scientific Publishing
ISBN: 3731510413
Category : Technology & Engineering
Languages : en
Pages : 194
Book Description
A design process for HTS DC cables was developed for high current applications. Based on the design process, a 35 kA HTS DC cable demonstrator was developed. The superconducting elements of the demonstrator were manufactured and tested individually at 77 K. Afterwards, the demonstrator cable was assembled and tested at 77 K. The assembled demonstrator successfully reached 35 kA at 77 K and self field conditions.
Publisher: KIT Scientific Publishing
ISBN: 3731510413
Category : Technology & Engineering
Languages : en
Pages : 194
Book Description
A design process for HTS DC cables was developed for high current applications. Based on the design process, a 35 kA HTS DC cable demonstrator was developed. The superconducting elements of the demonstrator were manufactured and tested individually at 77 K. Afterwards, the demonstrator cable was assembled and tested at 77 K. The assembled demonstrator successfully reached 35 kA at 77 K and self field conditions.
High Temperature Superconductivity 2
Author: Anant V. Narlikar
Publisher: Springer Science & Business Media
ISBN: 3662077647
Category : Technology & Engineering
Languages : en
Pages : 585
Book Description
In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.
Publisher: Springer Science & Business Media
ISBN: 3662077647
Category : Technology & Engineering
Languages : en
Pages : 585
Book Description
In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.
High-Temperature Superconductors: Materials, Properties, and Applications
Author: Rainer Wesche
Publisher: Springer Science & Business Media
ISBN: 1461550750
Category : Technology & Engineering
Languages : en
Pages : 448
Book Description
The discovery by J. G. Bednorz and K. A. Mtllier in 1986 that the superconducting state can exist in oxides at temperatures above 30 K stimulated research in the field of superconductivity and opened up a new field of research. Within a few years a large number of cuprate superconductors with transition temperatures well above the boiling point of liquid nitrogen have been found. The possibility of using liquid nitrogen as coolant re-stimulated interest in power applications of supercon ductivity. In this book an overview of the known high-Te superconductors and their physical properties is presented. Aspects related to conductor fabrication and high-current applications are emphasised. The material should be suitable for use in graduate level courses on superconductivity. Researchers in the field may profit from the large number of tables and references describing its status at the end of 1997. An introduction to high-To superconductivity must be based on the fundamental physical principles of normal-state electrical conductivity and the well-known characteristics of conventional superconductors. In Chapter 2 this background is provided. Crystal structures, anisotropic properties and general trends of the critical temperatures of the cuprate superconductors are described in Chapters 3 and 4. The processing of superconductor powders addressed in Chapter 5 affects considerably the current-carrying capacity of high-T. wires. In Chapter 6 several fabrication techniques for superconducting wires are described. In addition, the factors limiting the transport critical currents ofhigh-Te wires are discussed.
Publisher: Springer Science & Business Media
ISBN: 1461550750
Category : Technology & Engineering
Languages : en
Pages : 448
Book Description
The discovery by J. G. Bednorz and K. A. Mtllier in 1986 that the superconducting state can exist in oxides at temperatures above 30 K stimulated research in the field of superconductivity and opened up a new field of research. Within a few years a large number of cuprate superconductors with transition temperatures well above the boiling point of liquid nitrogen have been found. The possibility of using liquid nitrogen as coolant re-stimulated interest in power applications of supercon ductivity. In this book an overview of the known high-Te superconductors and their physical properties is presented. Aspects related to conductor fabrication and high-current applications are emphasised. The material should be suitable for use in graduate level courses on superconductivity. Researchers in the field may profit from the large number of tables and references describing its status at the end of 1997. An introduction to high-To superconductivity must be based on the fundamental physical principles of normal-state electrical conductivity and the well-known characteristics of conventional superconductors. In Chapter 2 this background is provided. Crystal structures, anisotropic properties and general trends of the critical temperatures of the cuprate superconductors are described in Chapters 3 and 4. The processing of superconductor powders addressed in Chapter 5 affects considerably the current-carrying capacity of high-T. wires. In Chapter 6 several fabrication techniques for superconducting wires are described. In addition, the factors limiting the transport critical currents ofhigh-Te wires are discussed.
High Temperature Superconductivity 1
Author: A. V. Narlikar
Publisher: Springer Science & Business Media
ISBN: 9783540406310
Category : Science
Languages : en
Pages : 536
Book Description
In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.
Publisher: Springer Science & Business Media
ISBN: 9783540406310
Category : Science
Languages : en
Pages : 536
Book Description
In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.
Advances in Superconductivity XII
Author: T. Yamashita
Publisher: Springer Science & Business Media
ISBN: 4431668772
Category : Technology & Engineering
Languages : en
Pages : 1162
Book Description
The 12th International Symposium on Superconductivity was held in Morioka, Japan, October 17-19, 1999. Convened annually since 1988, the symposium covers the whole field of superconductivity from fundamental physics and chemistry to a variety of applications. At the 12th Symposium, a mini-symposium focusing on the two-dimensionality of high-temperature superconductors, or the c-axis transport, and a session on vortex physics were organized. There were also many reports on the recent developments of YBCO-based coated conductors both in the United States and in Japan, AC losses of wires and tapes, developments of bulk materials with strong flux pinning, the recent progress in thin film and junction technologies, and the demonstration of various electronics applications using SQUIDs, microwave devices, and single-flux-quantum (SFQ) digital devices. This volume is a valuable resource for all those working in the field of superconductivity.
Publisher: Springer Science & Business Media
ISBN: 4431668772
Category : Technology & Engineering
Languages : en
Pages : 1162
Book Description
The 12th International Symposium on Superconductivity was held in Morioka, Japan, October 17-19, 1999. Convened annually since 1988, the symposium covers the whole field of superconductivity from fundamental physics and chemistry to a variety of applications. At the 12th Symposium, a mini-symposium focusing on the two-dimensionality of high-temperature superconductors, or the c-axis transport, and a session on vortex physics were organized. There were also many reports on the recent developments of YBCO-based coated conductors both in the United States and in Japan, AC losses of wires and tapes, developments of bulk materials with strong flux pinning, the recent progress in thin film and junction technologies, and the demonstration of various electronics applications using SQUIDs, microwave devices, and single-flux-quantum (SFQ) digital devices. This volume is a valuable resource for all those working in the field of superconductivity.
Advances in Cryogenic Engineering Materials
Author: U. Balu Balachandran
Publisher: Springer Science & Business Media
ISBN: 9780306463983
Category : Science
Languages : en
Pages : 664
Book Description
The 1999 Joint Cryogenic Engineering Conference (CEC) and International Cryogenic Materials Conference (ICMC) were held in Montreal, Quebec, Canada from July 12th to July 16th. The joint conference theme was "Cryogenics into the Next Millennium". The total conference attendance was 797 with participation from 28 countries. As with previous joint CEC and ICMC Conferences, the participants were able to benefit from the joint conference's coverage of cryogenic applications and materials and their interactions. The conference format of plenary, oral and poster presentations, and an extensive commercial exhibit, the largest in CEC-ICMC history, aimed to promote this synergy. The addition of short courses, workshops, and a discussion meeting enabled participants to focus on some of their specialties. The technical tour, organized by Suzanne Gendron, was of Hydro-Quebec's research institute laboratories near Montreal. In keeping with the conference venue the entertainment theme was Jazz, culminating in .the performance of Vic Vogel and his Jazz Big Band at the conference banquet. This 1999 ICMC Conference was chaired by Julian Cave of IREQ - Institut de recherche d'Hydro-Quebec, and the Program Chair and Vice-Chair were Michael Green of the Lawrence Berkeley National Laboratory and Balu Balachandran of the Argonne National Laboratory respectively. We especially appreciate the contributions of both the CEC and ICMC Boards and the conference managers, Centennial Conferences, under the supervision of Paula Pair and Kim Bass, in making this conference a success.
Publisher: Springer Science & Business Media
ISBN: 9780306463983
Category : Science
Languages : en
Pages : 664
Book Description
The 1999 Joint Cryogenic Engineering Conference (CEC) and International Cryogenic Materials Conference (ICMC) were held in Montreal, Quebec, Canada from July 12th to July 16th. The joint conference theme was "Cryogenics into the Next Millennium". The total conference attendance was 797 with participation from 28 countries. As with previous joint CEC and ICMC Conferences, the participants were able to benefit from the joint conference's coverage of cryogenic applications and materials and their interactions. The conference format of plenary, oral and poster presentations, and an extensive commercial exhibit, the largest in CEC-ICMC history, aimed to promote this synergy. The addition of short courses, workshops, and a discussion meeting enabled participants to focus on some of their specialties. The technical tour, organized by Suzanne Gendron, was of Hydro-Quebec's research institute laboratories near Montreal. In keeping with the conference venue the entertainment theme was Jazz, culminating in .the performance of Vic Vogel and his Jazz Big Band at the conference banquet. This 1999 ICMC Conference was chaired by Julian Cave of IREQ - Institut de recherche d'Hydro-Quebec, and the Program Chair and Vice-Chair were Michael Green of the Lawrence Berkeley National Laboratory and Balu Balachandran of the Argonne National Laboratory respectively. We especially appreciate the contributions of both the CEC and ICMC Boards and the conference managers, Centennial Conferences, under the supervision of Paula Pair and Kim Bass, in making this conference a success.
Advances in Superconductivity II
Author: Takehiko Ishiguro
Publisher: Springer Science & Business Media
ISBN: 4431681175
Category : Technology & Engineering
Languages : en
Pages : 1070
Book Description
Since the First International Symposium on Superconductivity (ISS '88) was held in Nagoya, Japan in 1988, significant advances have been achieved in a wide range of high temperature superconductivity research. Although the T c's of recently discovered oxide superconductors still do not exceed the record high value of 125K reported before that meeting, the enrichment in the variety of materials should prove useful to the investigation of the fundamental mechanism of superconductiv ity in these exotic materials. The discovery of the n-type superconducting oxides proved to oppose the previously held empirical fact that the charge carriers in all oxide superconductors were holes. In addition, optimization of the charge carrier density has been established as a technique to improve the superconducting proper ties of the previously known oxide materials. Many new experimental and theoreti cal advances have been made in understanding both the fundamental and the applied aspects of high temperature superconductivity. In this latter area, various new processing techniques have been investigated, and the critical current densities and other significant parameters of both bulk and thin film oxide superconductors are rapidly being improved. At this exciting stage of research in high temperature superconductivity, it is extremely important to provide an opportunity for researchers from industry, academia, government and other institutions around the world to freely exchange information and thus contribute to the further advancement of research.
Publisher: Springer Science & Business Media
ISBN: 4431681175
Category : Technology & Engineering
Languages : en
Pages : 1070
Book Description
Since the First International Symposium on Superconductivity (ISS '88) was held in Nagoya, Japan in 1988, significant advances have been achieved in a wide range of high temperature superconductivity research. Although the T c's of recently discovered oxide superconductors still do not exceed the record high value of 125K reported before that meeting, the enrichment in the variety of materials should prove useful to the investigation of the fundamental mechanism of superconductiv ity in these exotic materials. The discovery of the n-type superconducting oxides proved to oppose the previously held empirical fact that the charge carriers in all oxide superconductors were holes. In addition, optimization of the charge carrier density has been established as a technique to improve the superconducting proper ties of the previously known oxide materials. Many new experimental and theoreti cal advances have been made in understanding both the fundamental and the applied aspects of high temperature superconductivity. In this latter area, various new processing techniques have been investigated, and the critical current densities and other significant parameters of both bulk and thin film oxide superconductors are rapidly being improved. At this exciting stage of research in high temperature superconductivity, it is extremely important to provide an opportunity for researchers from industry, academia, government and other institutions around the world to freely exchange information and thus contribute to the further advancement of research.